• 천문학회보
• /
• 제44권2호
• /
• pp.68.4-68.4
• /
• 2019

In this poster, we present a relation between the Galactic foregrounds and Galactic latitude to study the structure of the Galactic foregrounds. We propose that the standard deviation of observed values along a line of sight with Galactic latitude b ('σ_l.o.s') is inversely proportional to ${\sqrt{sin{\mid}b{\mid}}}$. To confirm this, we use synchrotron intensity data from the Planck archive and rotation measure (RM) data from the NVSS. We divided the sphere of the Galactic coordinate into bins with a constant surface area and calculated the average of standard deviation along Galactic latitude ('σ_lat'). We compared σ_lat ${\sqrt{sin{\mid}b{\mid}}}$ with σ_lat along Galactic latitude and found that σ_lat ${\sqrt{sin{\mid}b{\mid}}}$ is the most constant. These results support that the relation is reasonable.

• 대한기계학회논문집B
• /
• 제33권6호
• /
• pp.427-434
• /
• 2009

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The numerical simulations for five different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermoaerodynamic performance for five different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, volume and area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 %, and the value of maximum ratio of Nusselt number augmentation is 7.05% when the riblet angle is $60^{\circ}$. The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum volume and area goodness factors are obtained when the riblet angle is $60^{\circ}$.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2465-2470
• /
• 2008

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The Numerical simulations for the 5 different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermo-aerodynamic performance for the 5 different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, Volume and Area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 [%], and the value of maximum ratio of Nusselt number augmentation is 7.05 [%] when the riblet angle is $60^{\circ}$ (Case5). The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum Volume and Area goodness factor are obtained when the riblet angle is $60^{\circ}$ (Case5).

• 한국식품과학회지
• /
• 제30권4호
• /
• pp.781-786
• /
• 1998

가열산화 과정중 대두유 및 돈지의 표면적의 영향을 조사하기 위하여 대두유와 돈지를 공기와 접촉면적이 서로 다른 시료 4가지$(0.04,{\;}0.08,{\;}0.12,{\;}0.16{\;}cm^2/g)$를 $185^{\circ}C$에서 64시간동안 가열하였다. 각 시료의 산패 정도를 비교하기 위하여 요오드가, 공액이중결합함량, 굴절률, 유전상수, 극성지질함량 및 리놀렌산과 팔미트산의 비(L/P ratio)등이 측정되었다. $0.04{\;}cm^2/g$와 $0.08{\;}cm^2/g$의 표면적을 갖고 64시간 동안 가열한 대두유의 요오드가는 각각 126.4와 125.4인 반면에 $0.12{\;}cm^2/g$와 $0.16{\;}cm^2/g$의 표면적을 갖고 64시간 동안 가열한 대두유의 요오드가는 각각 113.1과 116.9로 표면적 증가에 따라 급속한 감소를 보였다. 돈지의 경우에는 대두유와 유사한 경향을 나타냈으나 그 감소 폭은 대두유에 비하여 현저히 낮았다. 대두유와 돈지의 극성지질함량, 유전상수, 굴절률 등은 $0.124{\;}cm^2/g$부터 급속한 증가를 보였다. 한편 대두유의 경우 $0.12{\;}cm^2/g$부터 가열시간에 따라 공액이중결합함량은 급속한 증가를, 리놀렌산과 팔미트산의 비(L/P ratio)는 급속한 감소를 나타냈으나 돈지의 경우에는 표면적에 따라 차이를 나타내지 않았다. 이상의 결과로부터 가열산화 과정 중 표면적에 따른 유지의 산화정도는 $0.12{\;}cm^2/g$부터 산패가 급속히 진행됨을 보여주었다.

• 공업화학
• /
• 제9권5호
• /
• pp.729-733
• /
• 1998

은 침착된 활성탄의 표면 구조와 세공의 크기 분포등에 대하여 연구하였다. 침착물은 내부 표면에는 영향을 주지 않고 외부 표면에만 영향을 주는 것으로 나타났다. 또한 흡착 등온선은 침착되지 않은 활성탄이나 침착된 활성탄 모두 전형적인 BET 분류 type-I 임을 확인하였으며, 침착물 양이 증가할수록 흡착량이 감소하며 window blocking 현상이 나타남을 확인하였다. 침착물 양이 증가할수록 비 표면적 값은 감소하였으며, 미세세공 부피도 감소하였다. 은 침착된 활성탄의 평균 미세세공 반경은 침착물 양과는 무관하게 일정하였다.

• 대한기계학회논문집A
• /
• 제40권9호
• /
• pp.821-826
• /
• 2016

원자력 배관 설계에는 파단전 누설(leak before break, LBB) 개념이 사용되고 있다. LBB 개념의 적용을 위해서는 관통균열을 통한 누설률을 정확하게 예측할 수 있어야 한다. 단면적이 일정한 관통균열에 대한 누설률 해석은 많이 이루어지고 있으나 실제 관찰되는 관통균열에서는 배관 내면 쪽과 외면 쪽의 단면적이 다른 경우가 많이 발생된다. 따라서 본 논문에서는 유동경로를 따라 선형적으로 변화하는 단면적을 가진 관통균열에 대하여 누설률을 평가하여 단면적의 분포가 누설률에 미치는 영향을 살펴보았다. 또한 클래딩 등에 의하여 두께 방향으로 이중 재료로 된 배관에 존재하는 관통균열에 대해서도 누설률을 평가하여 유동경로를 따라 달라지는 균열면 형태학적 변수가 누설률에 미치는 영향을 살펴보았다.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.167-173
• /
• 2004

Recently, it has been reported that frictional behavior at nanometer scale can be different from that at macro scale. In this article, friction and wear tests were conducted using an AFM to investigate the effect of real contact area on the coefficient of friction and wear property. SiO$_2$, Hica, and SiGe were used in friction test and the AFM tip was Si$_3$N$_4$. The real contact area between an AFM tip and flat surface was calculated by the Johnson-Kendall-Roberts (JKR) theory. Wear specimen was Mica, and the diamond tip was used. We found that the coefficient of friction is constant below a critical area, but it is degraded over the area. Moreover, it is found that wear depth increased rapidly from a certain load and was degraded as a function of the number of the scanning cycles. Also, the range of scanning velocity used in this study had little effect on the wear depth.

• 한국환경과학회지
• /
• 제3권3호
• /
• pp.185-195
• /
• 1994

Masan bay is one of the polluted enclosed bays, which has red tides problem and the formation of oxygen deficient water in the bottom layer. Most important factors that cause eutrophication and red tide is nutrient materials containing nitrogen and phosphorus which stem from terrestrial sources and nutrients released from sediment. Therefore, to improve of water quality, reduction of these nutrient loads should be indispensible. At this study, the three-dimensional numerical hydrodynamic and eutrophication model, which were developed by Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the phytoplankton production and also to evaluate the effect of water quality improvement plans on phytoplankton production. In field sorvey, the range of concentrations of chlorophyll-a at surface area was found to be 29.17 - 212.5mg/m3, which were exceeding eutrophication criteria. The constant currents defined by integrating the simulated tidal currents over 1 tidal cycle showed the counterclockwise eddies in the southern part of Budo. The general directions of constant currents were found to be southward at surface and northward at bottom over all the bay. The eutrophication model was calibrated with the data surveyed in the field area in June, 1993. The calculated results are in fairly good agreement with values within relative error of 30%. The pollutant load from the sources such as the input from terrestrial release from the sediment was reduced by the rate of 50, 70, 90, 98% to effect of phytoplankton production. Phytoplankton production was reduced to of the 90% reduction of the input loads from terrestrial sources and 8% in 90% reduction of the load from sediment.

• Journal of Pharmaceutical Investigation
• /
• 제35권4호
• /
• pp.279-285
• /
• 2005

Ground CS-891 (N-[1-(4-methoxyphenyl)-1-methylethyl]-3-oxo-4-aza-5a-androst-1-ene-$17{\beta}$-carboxamide) of poorly water soluble drug was obtained using a Heiko Seisakusho model TI-100 vibration mill, and samples with different crystallinity were prepared at mixture ratios of 10:0, 7:3, 5:5, 3:7 and 0:10 (intact;ground CS-891). Physicochemical characterizations were obtained using qualitative and quantitative X-ray diffractometry, different scanning calorimetry (DSC), scanning electron microscopy (SEM), Quantasorb surface area analyzer, and controlled atmosphere microbalance. With increase of amorphous CS-891 in mixture ratios, the intensities of X-ray diffraction peaks of crystalline CS-891 were decreased, whereas surface area, water absorption, and exothermic peaks in DSC were increased. The apparent solubility of ground CS-891 was $4.4\;{\mu}g/ml$ and the solubility of intact CS-891 was $3.1\;{\mu}g/ml$ at $37{\pm}1^{\circ}C$. The apparent precipitation rates of CS-891 in a supersaturated solution during the solubility test were increased with an increase of amorphous CS-891, and a crystalline form of CS-891 transformed from amorphous CS-891 after the solubility test was found by X-ray diffraction analysis, DSC and SEM. The dissolution profiles of CS-891 with different crystallinity at $37{\pm}1^{\circ}C$ by the USP paddle method were investigated, and the apparent dissolution rate constant of ground CS-891 was about 5.9-fold higher than that of intact CS-891. A linear relationships between the crystallinity of CS-891 and the apparent dissolution rate constant (r>0.96) were obtained.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.87-95
• /
• 2002

The aim of this article is to perform the numerical simulation far drop drag and breakup processes in air-assisted sprays using the Taylor analogy breakup (TAB) model with a modified drop drag model, in which a random method is newly used to consider the variation of the drop's frontal area. The predicted results for drop trajectory and Salter mean diameter (SMD) were compared with experimental data and the simulation results using the earlier published models such as TAH model, surface wave instability (Wave) model, and Wave model with original drop drag model. In addition, the effects of the breakup model constant, Ck, on prediction of spray behaviors were discussed. The results shows that the TAB model with the modified drop drag model is in better agreement with experimental data than the other models, indicating the present model is acceptable for predicting the drop breakup process in air-assisted sprays. At higher Weber numbers, the smaller Ck shows the best fitting to experimental data. It should be noted that more elaborated studies is required in order to determine the breakup model constant in the suggested model in the study.