• 한국방재학회 논문집
• /
• 제6권4호통권23호
• /
• pp.57-65
• /
• 2006

본 연구에서는 본류와 지류가 만나는 합류구간, 만곡 및 사행구간이 있는 자연하천과 동일한수리모형을 제작하고 합류부를 중심으로 본류와 지류의 유량비 변화에 따라 모형의 합류부 횡단면에서 발생하는 수위차의 변화를 분석하였다. 합류이전의 최하류단면 수위를 기준으로 하는 합류부 각 단면의 최대수위 변화에 미치는 유량비의 영향은 합류부 하류구간보다 상류구간에서 더 크게 나타난다. 횡단면의 최소수위에 대한 최대수위의 변화는 합류부 중심에 가까울수록 증가하며 합류부 중심 직하류에서 최대를 보인다. 또한 합류구간 횡단면의 수면경사는 단면형태에 따라 영향을 받으며 본류에 대한 지류의 유량비가 감소할수록 수면경사도 감소한다. 기존에 제안된 일정한 곡률반경과 정형화된 단면에서 도출된 횡단면 수위차 산정 공식이 평창강과 동일하게 제작된 모형수로에서 실측값과 약 60%의 차이를 보인 반면 본 연구에서는 실측값과 약 10%의 차이를 보이는 수위차 산정 공식을 제안하였다.

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.24-32
• /
• 2007

Laser surface hardening is beneficially used for surface treatment of structural steel. Due to very rapid heating and cooling rates, structural low-alloy steel(SCM4) can be hardened as self quenching. The aim of this research project is to improve the influence of the process laser parameters: laser power, spot size, surface roughness, and traverse speed. The laser beam is allowed to scan on the surface of the workpiece at the constant power(1095W), varying the traverse speed at 0.3m/min, 0.5m/min and 0.8m/min. The optical lens with the elliptical profile is designed to obtain a wide surface hardening area with uniform hardness. From the results of the experiment, it has been shown that the stable hardness is about 600$\sim$700Hv, when the laser power, focal position and the traverse speed are P=1095W, z=0mm and v=0.3m/min.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.423-428
• /
• 2010

To reduce polarization of electrochemical capacitor based on carbon nanotube, titanium oxide nanoparticles were deposited by ultrasound. The pore distribution of $TiO_2$/CNT nanoparticle exhibited surface area of $341\;m^2g^{-1}$ when $TiO_2$ content was 4 wt %, which was better than that of pristine CNT with surface area of $188\;m^2g^{-1}$. The analyses indicated that titanium oxide (particle diameter < 20 nm) was deposited on the CNT surface. The electrochemical performance was evaluated by using cyclic voltammetry (CV), impedance measurement, and constant-current charge/discharge cycling techniques. The $TiO_2$/CNT composite electrode showed relatively better electrochemical behaviors than CNT electrode by increasing the specific capacitance from $22\;Fg^{-1}$ to $37\;Fg^{-1}$ in 1 M $H_2SO_4$ solution. A symmetric cell assembled with the composite electrodes showed the specific capacitance value of $11\;Fg^{-1}$ at a current loading of $0.5\;mAcm^{-2}$ during initial cycling.

• 한국연초학회지
• /
• 제18권2호
• /
• pp.150-159
• /
• 1996

In this study, to obtain the basic data for the optimum moisture control system, moisture adsorption characteristics, adsorption isotherms models for water and surface physical characteristics of burley and flue-cured tobacco were investigated. By the hypothesis' the phenomenon of moisture adsorption of tobacco is the same as the first order reaction, the wetting constant (k) and equilibrium moisture content were obtained. And activation energy, frequency factors were also calculated by applying its data to Arrhenius equation. The Kamei's empirical formula of moisture adsorption isotherms showed the best agreement with the experimental data and its correlation coefficient (r) was 0.997. It can be seen that specific surface area of burley is 157 m2/g, that of flue-cured is 152 m2/g, -△H1 of adsorbed monolayer is 45,972 J/mol, 45,486 J/mol, respectively, and the condensation heat (40,595 J/mol) being caught in adsorbed multilayer is less than that of monolayer.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.244-251
• /
• 2009

Porous media have especially large surface area per volume, which contain complex fluid passage. If porous media can be applied to cool a CPU or an electronic device with large heat dissipation, it could result in heat transfer enhancement due to the enlargement of the heat transfer area and the flow disturbance. This study is aimed to identify the heat transfer and pressure drop characteristics of high-porosity metal foams in a horizontal channel. Experiment is performed with the various heat flux, velocity and pore density conditions. Permeabilities, which is deduced from Non-Darcy flow model, become lower with increasing pore density. Nusselt number also decreases with higher pore density. High pore density with same porosity case shows higher pressure loss due to the increase of surface area per unit volume. The fiction factor decreases rapidly with increase of Reynolds number in Darcy flow region. However, it converges to a constant value of the Ergun coefficient in Non-Darcy flow region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.111-115
• /
• 2004

In this paper, evaluation of physical properties about dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of phospolipid monomolecular DLPC, DMPC using pressure stimulus. As a result, the changed surface pressure, displacement current and the transition forms of dipole moment of phospolipid monomolecular in area per molecular by pressure stimulus were conformed well. It was known that the monolayers by linear relationship for decision of dielectric relaxation time between compressure speed $\alpha$ and molecule area $A_m$ By according to the linear relationship relation get that frictional constant $\xi$, DLPC was $1.89{\times}10^{-19}$[Js] and DMPC was $0.722{\times}10^{-19}$[Js]. It is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집
• /
• pp.37-41
• /
• 2004

In this paper, evaluation of physical properties about dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of phospolipid monomolecular DLPC, DMPC using pressure stimulus. As a result, the changed surface pressure, displacement current and the transition forms of dipole moment of phospolipid monomolecular in area per molecular by pressure stimulus were conformed well. It was known that the monolayers by linear relationship for decision of dielectric relaxation time between compressure speed and molecule area By according to the linear relationship relation get that frictional constant, DLPC was $1.89{\times}10^{-19}$ [Js] and DMPC was $0.722{\times}10^{-19}$[Js]. lt is found that the phospolipid monolayer of dielectric relaxation takes a little time and depend on the molecular area.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.104-116
• /
• 1998

This paper provides a review of the performance for SM45C using the CNC lathe. Under the constant cutting area, the tool wear for large feed rate is more than the small feed rate, and the progress goes more rapidly as the cutting speed is increased. This is caused by the friction between the workpiece and the bite. The average cutting force increases as the feedrate increases, and decreases as the cutting speed increases. This is because the effective rake/shear angle becomes smaller as the feedrate becomes larger. The higher is the cutting speed and the aspect ratio (the ratio for depth of cut to feedrate), the lower is the cutting force and the surface roughness. Also, for the optimal selection of the cutting conditions, many experimental graphical data were obtained. That is, the cutting force, the tool life, and the surface roughness were measured and investigated as the depth of cut and the feedrate changed. And the size effect was examined as the depth of the cut varied.

• 환경위생공학
• /
• 제11권3호
• /
• pp.29-35
• /
• 1996

Numerical solutions were obtained to the model equations for various parameters characterizing the pore structure, effective internal diffusion and the chemical reaction constant. The conversion was decreased with the cause of pore closure at the surface of reacting particles, reduction of porosity, surface area of reaction and effective diffusion coefficient in the solid with the progress of reaction. Total conversion was strongly depend on the local conversion at surface. According to the decreasing of impregnated concentration of the copper oxide and the increase of the flue gases concentration, total conversion was increased. And the conversion were affected by gas flow rate and pore size distribution of the reacting solid.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.608-614
• /
• 2004

Isotactic polypropylene (PP) surfaces were modified with argon and oxygen plasmas using a radio­frequency (RF) glow discharge at 240 mTorr and 40 W. The changes in topography and surface structure were investigated by atomic force microscopy (AFM) in conjunction with specular reflectance of infrared (IR) microspectroscopy. Under our operating conditions, the AFM image analysis revealed that longer plasma treatment resulted in significant ablation on the PP surface, regardless of the kind of plasma employed, but the topography was dependent on the nature of the gases. Specular reflectance IR spectroscopic analysis indicated that the constant removal of surface material was an important ablative aspect when using either plasma, but the nature of the ablative behavior and the resultant aging effects were clearly dependent on the choice of plasma. The use of argon plasma resulted in a negligible aging effect; in contrast, the use of oxygen plasma caused a noticeable aging effect, which was due to reactions of trapped or isolated radicals with oxygen in air, and was partly responsible for the increased surface area caused by ablation. The use of oxygen plasma is believed to be an advantageous approach to modifying polymeric materials with functionalized surfaces, e.g., for surface grafting of unsaturated monomers and incorporating oxygen-containing groups onto PP.