• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1026-1031
• /
• 2003

자동 급수펌프는 압력스위치에 의해 운전 및 정지를 하게 된다. 따라서 수량 증감에 따른 펌프의 빈번한 운전 및 정지로 인해 지속적인 정격 및 정압 운전이 불가능하다. 또한 빈번한 작동으로 인해 지속적으로 일정한 압력을 얻을 수 없으며, 펌프의 소손과 에너지의 낭비가 심한 단점을 가지고 있다. 본 논문에서는 이러한 단점을 해결하고자 급수밸브, 유량센서, 제어장치로 구성되는 정압 급수장치를 설계 제작하였다. 급수밸브는 유출되는 물의 양과 관계없이 항상 일정한 양의 물을 유입하여 펌프의 부하를 줄이는 역할을 한다. 유량센서는 적외선 다이오드를 사용하여 유출되는 물의 양의 측정하며, 제어장치는 8 비트 마이크로프로세서를 이용하여 설계하였으며, 특별한 제어 알고리듬에 의해 펌프의 운전과 정지를 제어하게 하였다. 본 논문에서 개발한 장치는 토출 압력이 일정하게 유지되고 펌프의 작동 및 정지 동작이 부드럽게 이루어지며, 펌프의 지속적인 정압운전이 가능하므로 기존의 단점을 보완하는 장치로 사료된다.

• 항공우주시스템공학회지
• /
• 제7권4호
• /
• pp.1-11
• /
• 2013

In this study, probabilistic reliability analysis was conducted for hybrid rocket performance using Monte-Carlo Simulation. For the accuracy, reliability analysis was performed with experimental data. To simplify the analysis process, the oxidizer was supplied with constant pressure, so that pressure variation with time can be eliminated. And time-space averaged regression rate model was used. The regression rate is obtained with a series of experiments. For reliability analysis of thrust, constant exponent of regression rate is assumed that has probabilistic character. So, the efficiency of characteristic velocity has also probabilistic values. As a results, probability distribution of the thrust is obtained by Monte-Carlo simulation using random samples of the input parameter and validated under the 95% confidence level.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.51-57
• /
• 2014

High pressure common rail injection technology has revolutionized the diesel industry. Over the last decade it has allowed engine builders to run higher injection pressures as much as above 1,300bar in order to increase engine efficiency, while reducing emissions. This common rail system has low pressure circuit which is consist of low pressure pump, cascade overflow valve and flow metering unit. The low pressure pump's purpose is to feed fuel oil to the high pressure pump. The cascade overflow valve keeps pressure in front of the metering unit constant and provides lubrication for the high pressure pump. The metering unit, known as the MPROP or fuel pressure regulator, regulates the maximum flow rate delivers to the rail. In this paper, we have investigated the performance characteristics of each components and total low pressure circuit of common rail system.

• 상하수도학회지
• /
• 제24권6호
• /
• pp.735-741
• /
• 2010

A pilot test was carried out to investigate the long term operation characteristics of Microfiltration (MF) system as a pretreatment for seawater reverse osmosis (SWRO) processes for two years. A commercialized MF module with pressurized operation type was used to filter seawater to remove particles which can foul reverse osmosis (RO) membrane. Silt Density Index (SDI) values of filtered seawater by the MF system were ranged from 0.14 to 1.79, which meet the SDI standard for RO feed water as depicted in previous literatures. Although the tested seawater is quite clean (i.e., dissolved organic cabon (DOC) concentration and turbidity were about 1 mg/l and less than 1 NTU, respectively) enough not to foul the MF membrane, steep increase in trans-membrane pressure (TMP) with a constant flux were observed over a whole operation period. A set of operation and water analysis data implies that the steep increase in TMP was resulted from iron and maganese fouling by the combination of metal corrosion by seawater and oxidation state by aeration and residual chlorine.

• 한국양식학회지
• /
• 제18권3호
• /
• pp.180-188
• /
• 2005

The separation performances for thirty different dimensions of a low-pressure hydrocyclone (LPH) were tested in order to obtain an optimum dimension scale for fecal solid removal from an aquaculture system. The geometric variables were considered on two inlet diameters (Di: 30 and 50 mm), five overflow diameters (Do: 30, 50, 60, 70 and 100 mm), and three cylinder lengths (Lc: 250, 345 and 442 mm), while the cylinder diameter (Dc) of 335 mm, underflow diameter (Du) of 50 mm and cone angle (${\theta}$) of $68^{\circ}$ were kept constant. A small size for carp feces was regarded as the target for the removal of solids. Spherical polystyrene particles (1.1-1.3 mm dia., ${\rho}_s=1.05g/cm^3$), which demonstrate a similar settling velocity and specific gravity to the carp feces, were used as feed. The separation performance was tested in the range of 330 to 1200 ml/s of the inflow rate. Experimental results using ANCOVA and the Tukey test (${\alpha}=0.05$) demonstrated that the separation performances of LPH were significantly affected (P<0.05) by fi, Di and Do. In contrast, there was no significant Lc effect (P>0.05) on the separation performances. The maximum separation performance was detected at dimension combinations of 30 mm of inflow diameter (Di), 50, 60 and 70 mm of overflow diameter (Do), 345 mm of cylinder length (Lc). The dimension proportions were 0.09, 1.03, 0.15-0.21 and 0.15 (or Di/Dc, Lc/Dc, Do/Dc and Du/Dc, respectively.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.470-477
• /
• 2010

The IGCC (Integrated gasification combined cycle) is known for one of the highest efficiency and the lowest emitting coal fueled power generating technologies. As the core technology of this system is the gasifier to make the efficiency and the continuous operation time increase, the research about different coal's gasification has been conducted. Our research group had set-up the coal gasifier for the pilot test to study the effect of different coals-Shenhua and Adaro coal- on gasification characteristics. Gasification conditions like temperature and pressure were controlled at a fixed condition and coal feed rate was also controlled 30 kg/h to retain the constant experimental condition. Through this study we found effects of coal composition and $O_2$/coal ratio on the cold gas efficiency, carbon conversion rate. The compounds of coal like carbon and ash make the performance of gasifier change. And carbon conversion rate was decreased with reduced $O_2$/coal ratio. The optical $O_2$/coal ratio is 0.8 for the highest cold gas efficiency approximately. At those operating conditions, the higher coal has the C/H ratio, the lower syn-gas has the $H_2$/CO ratio.

• Journal of Animal Science and Technology
• /
• 제45권2호
• /
• pp.241-250
• /
• 2003

국내산 고간류의 영양학적 평가는 매우 중요하다. 본 연구는 압력센서를 이용하여 국내산 고간류의 가스발생량과 반추위발효산물과의 상관관계를 비교하고자 실시하였다. 가스발생량 측정장치는 압력센서, AD board, LED 모니터 및 real-time graphics가 설치된 컴퓨터로 구성되었다. 가스발생량과 건물소화율은 지수방정식 Pt = a + b ($1-e^{-ct}$)을 기초로 추정하였다.초기 가스발생량은 볏짚이 가장 높았으며 보리짚, 밀짚순이었다. 시간당 분해상수는 3.8, 2.5, 2.5%$h^{－1}$로서 볏짚, 보리짚, 밀짚순이었다. 전체 휘발성 지방산은 초기 12시간에 유의한 차이가 있었지만 배양 72시간 이후의 농도는 세 처리구에서 비슷한 결과를 나타냈다. 가스발생량과 건물소화율의 상관지수($r^2$)는 0.76-0.83으로 밀접한 관계가 있었으며 또한 휘발성지방산과 가스발생량의 상관지수는 0.91-0.98로 매우 밀접한 관계가 있었다. 따라서 가스발생량, 건물소화율 및 휘발성 지방산의 단일상관관계는 고간류의 in vivo 소화율에서도 유사할 것으로 보인다.

• 한국결정성장학회지
• /
• 제13권1호
• /
• pp.5-14
• /
• 2003

Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

• 멤브레인
• /
• 제8권2호
• /
• pp.77-85
• /
• 1998

알루미늄 전착공정중 도료정제장치에서 발생하는 도료계 폐수(COD$_{Mn}$ 1,500~2,000 ppm)를 역삼투압을 이용하여 농축수는 전착조로 보내 재사용하고 반면 투과수는 세정수로 사용할 목적으로 시스템을 설계하여 현장 설치하였다. 역삼투압시스템은 폴리아미드 재질의 나권형 모듈(직경 102 mm$\times$ 길이 1,016 mm)3개를 직렬로 연결하고 시스템회복율 30%, 운전압력 11.5 kg/$cm^2$, 그리고 실온에서 3일 주기로 발생하는 폐수량 20 m$^3$을 회분식조업으로 처리하였다. 원폐수를 42시간 연속가동하여 5배까지 농축하는 실험기간중 거의 일정한 투과 flux 390 l/m$^2$-hr을 유지하였고 그 투과수질이 COD$_{Mn}$ 300 ppm으로 나타났다. 이는 도료정제장치의 잔존 도료성분을 회수하기 위해 사용되는 순수대신 세정수로 사용하기에 적합하였다. 그리고, COD$_{Mn}$ 제거율은 83$\pm$5%이었으며, 각 용제성 분별 제거율은 feed 농도의 증가에 따라 감소하였는데 5배 농축시 ethyl cellusolve, butyl cellusolve 그리고 n-butanol은 각각 79, 87 그리고 70%로 나타났다.