• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.235-242
• /
• 2012

Mikania micrantha, a neo-tropical vine, is spreading rapidly in the tropical part of Nepal and is now threatening the rural ecosystem including biodiversity and rural livelihoods. However, no attempt has been made to control the spread of M. micrantha. As a result, the vines are spreading freely and rapidly. After a thorough literature review and assessment of forest management practices, we proposed a manual cutting method, as it suits the Nepalese situation for several reasons: required labor is readily available, as local communities are managing forest patches, and the method does not have any potential adverse effects on non-target native species. Experimental plots were laid out in August 2011 to examine the effectiveness of manual cutting. Two different site types based on canopy coverage were selected and divided into three blocks based on cutting strategy. Four treatments were assigned across the experimental plots following a complete block design. We harvested above-ground biomass according to the assigned treatment. The results suggested that there should be at least two consecutive cuttings within a 3-week interval before flowering, and that three consecutive cuttings resulted in 91% mortality of the vines. In addition, cutting promoted regeneration of native plant species. Employing regular cutting operations can modify understory shade enhancing regeneration of native species, which is a desirable condition to constrain proliferation of M. micrantha. Periodic cuttings reduced the competitiveness of M. micrantha regardless of canopy openness, but native ground cover should be retained.

• Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.66-71
• /
• 2017

Background: The sprouts of oak species play an important role in maintaining the oak community in a disturbed environment. In this study, we cut 1-year-old oak in three times during the 3 years and measured the sprout responses to know sprouting ability of six deciduous oaks in Korea. Results: Oak sprouts have appeared in spring and fall, and some of the sprouts had lifespan as short as a month. As the number of cutting increases, sprout number of Quercus acutissima increased whereas the other oak species decreased or died. The average number of sprouts over the 3 years was from 1.4 (Quercus mongolica) to 2.2 (Q. acutissima) per individual. Quercus serrata died after the second cutting, and Quercus dentata died after the third cutting. So, the two species have the lowest sprouting ability among six oak species. The sprouts grew actively during fall and slowly in summer. The sprout length during the 3 years was in the following descending order: Q. acutissima, Quercus aliena, Q. dentata, and Q. mongolica. Sprout of Q. acutissima and Q. aliena generated steadily over the 3 years, and sprout of Quercus variabilis and Q. mongolica was changed by year. After the 3 years, the number of sprouts increased only in Q. acutissima but sprout number of the other five oak species decreased. The sprout length of Q. acutissima, Q. aliena, and Q. variabilis increased, but sprout length of the other three oak species decreased. The average survival rate of saplings over the 3 years was in the following descending order: Q. acutissima, Q. aliena, Q. variabilis, and Q. mongolica. Conclusions: As a result, the sprouting ability of Q. acutissima was the highest. Such level of sprouting ability may be the evidence of how Q. acutissima community exists as a dominant species in a disturbed environment in lowlands of Korea peninsula.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.256-261
• /
• 2009

This study was carried out to examine the effects of cutting condition on the rooting and their subsequent growth of cut flower in plug cutting of summer-flowering chrysanthemum 'Iwanohakusen'. The more leaves were attached to the cutting, the higher shoot growth and rooting were. Shoot growth of cuttings was not affected by cutting length, but rooting was better in over 5 cm long cutting. Shoot growth was enhanced by increasing thickness of cutting, and 5.5 mm thick cutting was favored in rooting. When the many leaves were attached on the cutting, the length and weight of cut flower increased. Over 7 cm long cutting showed higher values in growth of cut flower and ray flower number. Cutting of 5.5 mm diameter showed more favorable growth of cut flower than the other treatments. Therefore, it is concluded that rooting of cutting and consecutive growth of cut flower was improved when 7 cm long and 5.5 mm diameter cutting with 4 leaves was used in plug cutting of chrysanthemum 'Iwanohakusen'.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.58-63
• /
• 1998

There are lots of factors that are related to the geometric characteristics of machined surface. Among them, the tool path and milling mode (up cut milling or down cut milling) are the easiest controllable machining conditions. Thus, the first objective of this research is to study the effects of them on the milled surface that is generated by an end milling tool. To get precision parts, not only the machining process but also the measurement of geometric tolerance is important. But, this measurement requires a lot of time, because the infinite surface points must be measured in the ideal case. So, the second objective is to propose a simple flatness measurement method that can be available instead of the 3-D geometric tolerance measurement method, using a scale factor and characterized points. Finally, it is also shown that the possibility of flatness improvement by shifting the consecutive fine cutting tool path as compared with the last rough cutting tool path.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.2
• /
• pp.23-34
• /
• 1995

This paper is concerned with effective and reliable tool breakage detection method using pattern characteristics of feed motor current in milling operations. Correlation coefficient is derived from the feature vector of signal for two consecutive which are extracted feed motor current over three spindle revolutions. The changing pattern of correlation coefficient is continuously compared to detect tool breakage and monitor cutting conditions. This proposed monitoring scheme is not affected by different tools, friction of motion, and varying cutting conditions and material shapes. Experimental results are presented to support the proposed monitoring scheme.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.385-391
• /
• 2012

This study was conducted to investigate the effects of the runner cutting time on the growth and yield of strawberry (Fragaria ${\times}$ ananassa cv. Maehyang and Seolhyang) during nursery period of two consecutive years (2009 and 2010). Strawberry runners which connected from mother plants to daughter plants were cut 30, 20, 10 and 5 days before transplanting day (11 Sep. 2009 and 10 Sep. 2010). When runner cutting time delayed, more nutrition was supplied to the daughter plant until late nursery period. It showed that there was a tendency to increase the fresh weight, crown diameter and leaf chlorophyll content. On the other hand, when the runner was cut earlier, the growth of underground part such as root weight was improved. Irrigation demand increased to 29.7% in case of runner cutting from mother plant compared with runner non-cutting treatment. In addition, infection ratio of anthracnose through runner part was 37.6% higher in case of runner cutting than that of runner non-cutting treatment. After transplanting, budding and flowering period were delayed up to 2 or 3 days because of late runner cutting. But there was no significant difference in marketable fruit yield among runner cutting times. It is recommended to conduct runner cutting 5 or 10 days before transplanting for reducing the occurrence of anthracnose.

• Korean Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.115-126
• /
• 2008

The construction of an athlete's tight-fitting garments is very important to the wearer in terms of athletic performance. Therefore pattern development of tight-fitting garments must allow for the full range of human movement and postures. In this study the relationship between the construction of a skate pants pattern and clothing fitting was explored with the aim of improving the comfort of the clothing. The four male subjects were university students between the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on four consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Results showed differences in the front-rise length and back-rise length between basic pants(A) and modified pants(B,C,D) were -5.16cm and +5.64cm. Comparing the basic pants pattern(A) with modified pants pattern(B), the latter was superior to basic pants(A) in terms of pressure sensation and closeness of fit, but there was no significant difference. Among the four tight-fitting skate pants, A and B pants were superior to the others in terms of fitting and stability of waist and hip sections. In the case of the skate pants, the number of cutting lines in the pattern had an influence on clothing comfort. A minimum cutting line for tight skate pants was better than a maximum cutting line in terms of clothing comfort.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.2
• /
• pp.55-59
• /
• 2004

Throughout manufacturing processes, pulse shaping is required for material processing and it is regarded as an important (actor according to the specific characteristics of materials. Therefore, this study suggests a highly appropriate pulse shaping technique using a multi-switching method. This is a pulse superposition method in which one flash lamp can consecutively turn on by the double switching of the discharging system. It is possible to construct a variety of pulse shapes and pulse widths by the consecutive trigger of the silicon-controlled rectifiers (SCR) of a PIC (program integrated circuit) one-chip microprocessor. The use of this technique can provide a number of advantages to people who require suitable pulse shaping for particular applications such as welding, cutting, and drilling.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.562-566
• /
• 2008

This study describes cross-contamination events that occur in animal food processing. We analyzed the number of Salmonella spp. contamination transferred from pork meat to workers' hands (wearing polyethylene gloves; PG, cotton gloves; CG, and bare hands), cutting boards and knives, and vice versa. Transfer rate of CG 38.80% was higher than that of PG 3.11% and bare hands 1.35%. In particular, when wearing CG, the transfer rate from the CG to bare hands with CG was 0.07%. Also, the range of transfer rates from the contaminated pork meat to cutting board and knife was 0.20-1.99%. In contrast, the transfer rates from the worker's hands (with PG/CG and bare hands) to cutting board, knife, and pork meat ranged from 0.0015-0.21%. There was a lower transfer rate from workers' hands than from pork meat. These findings indicate that the use of PG compared with CG could effectively reduce or prevent the cross-contamination and provide important information concerning the consecutive transfer of Salmonella spp. during food processing.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.540-546
• /
• 2008

Enrichment planting has been used as one of the promising restoration techniques to accelerate the natural restoration process of secondary forests or logged-over forests in Myanmar, The objectives of this study were to examine the growth performances of two commercial species such as Teak (Tectona grandis Linn f.) and Padauk (Pterocarpus macrocarpus Kurz) in response to different canopy opening treatments and to examine the suitability of these species in enrichment planting activities for the restoration of degraded tropical forests in Myanmar. In this study, split plot design was applied, and three levels of canopy openings were experimented. The survival rate and height growth of two species were measured four times with 6 month interval. The root collar diameter (RCD) was also measured in the last assessment. Although the survival rate of seedlings was not significantly different among the three treatments (p>0.05) as well as between two species (p>0.05) for all consecutive measurements, height (p<0.05) and RCD were significantly different (p<0.001) among the treatments, T. grandis seedlings thrived best under complete canopy opening (i.e., 5 m width canopy opening with strip-clear cutting) while P. macrocarpus seedlings under partial canopy opening (without felling of marketable tree species). Because this study is concerned with only for young stage of seedlings, continuous assessment and follow-up tending activities are needed to verify the species suitability and optimum width of canopy opening for enrichment planting activities in restoration of degraded forests of Myanmar.