• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.199-204
• /
• 2010

Recently, the transmission amount of information that each single person requires is growing by development of electron information communication technology. So in this paper we analysis the phase noise characteristics to obtain a most suitable of SNR performance request characteristic by BER on CATV transmission system that satisfy performance request DOCSIS 2.0 standard. Especially we get the parameter value of PLL that satisfy phase noise characteristic request standard using developed simulator. Presented method can be used to obtain a performance request standard connection performance request standard of high speed CATV transmission system in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.357-364
• /
• 2012

In Visible Light Communication (VLC) system, with the limitation of transmission range and Field Of View (FOV), LOS (Line of Sight) link between two transceivers should be guaranteed due to the straightness of the visible-light signal. Especially for indoor applications, link recovery is an advantage method to remain the link connection because of the link failure in which caused by movement obstacle. Link recovery schemes try to keep link dynamically without re-initialing connection. This article proposes a new link recover scheme for VLC system by using cooperative communication. Our propose scheme focuses on the QoS reservation resource by GTS in IEEE 802.15.7 specification in which the requested QoS resource from client should be guarantee during the application time. With the link recovery scheme, we will try to continue the link connection as long as possible when unexpected disconnect link. The mathematical analysis and simulation results show that proposed scheme increases the overall reliability of the VLC system.

• Journal of Integrative Natural Science
• /
• v.11 no.4
• /
• pp.192-196
• /
• 2018

The mobile agent paradigm can be exploited in a variety of ways, ranging from low-level system administration tasks to middle ware to user-level applications. Mobile agents can be useful in building middle-ware services such as active mail systems, distributed collaboration systems, etc. An active mail message is a program that interacts with its recipient using a multimedia interface, and adapts the interaction session based on the recipient's responses. The mobile agent paradigm is well suitable to this type of application, since it can carry a sender-defined session protocol along with the multimedia message. Mobile agent communication is possible via method invocation on virtual references. Agents can make synchronous, one-way, or future-reply type invocations. Multicasting is possible, since agents can be aggregated hierarchically into groups. A simple check-pointing facility has also been implemented. Another proposed solution is to use multi agent computer systems to access, filter, evaluate, and integrate this information. We will present the overall architectural framework, our agent design commitments, and agent architecture to enable the above characteristics. Besides, the each information needed a mobile agent system such as text, graphic, image, audio and video etc, constructed a great capacity multimedia database system. However, they have problems in establishing connections over multiple subnetworks, such as no end-to-end connections, transmission delay due to ATM address resolution, no QoS protocols. We propose a new connection management scheme in the thesis to improve the connection management involved of mobile agent systems.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.320-327
• /
• 2010

In this paper, multiple offshore wave energy converters with different output characteristics are connected to one power distribution substation. The connection between the power take-off of the different wave energy converters and the electrical power transmission system is presented in order to investigate whether multiple wave energy converters can augment energy yield and improve network integration capabilities. Moreover, the model of an array of wave energy converters is developed with the goal of analyzing the effects of the offshore wave farm on the electrical network to which it is connected. It is also developed to ensure that the electricity generated by the array is sufficiently controllable, and of a quality that can be integrate into the electricity supply network without unduly increasing the cost of connection, production or delivery.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.235-236
• /
• 2006

IEEE 802.16 networks support mobile stations (MSs) to access broadband wireless networks while moving at a vehicular speed. However, IEEE 802.16 networks do not provide link layer native multicast capability because of point-to-multipoint connection characteristic. Due to this feature, it is not easy to adopt protocols or applications which need native link layer multicast capability. In order to solve the multicast support problem, we use the built-in LAN emulation feature of IEEE 802.16 which is based on Convergence Sublayer (CS). Our proposed operational procedures support not only the delivery of link local scope multicast packets, but also the delivery of non-link local scope multicast packets such as site local or global scope multicast packets. We also present the method of forming multicast Connection Identifier (CID) which is used to transport IP packets over IEEE 802.16 networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.498-508
• /
• 1991

This thesis presents a performance analysis algorithm that estimates erro performance of individual links, at the bit level, in an end-to-end digital connection using the model of 3-statte MarKov chain. The link model proposed the burst error behavior of each individual link. It also presents a method to concateante several individual links and extract a model for end-to-end digital connection. This resulting end-to-end model can be used to calculate performance parameters such as bit error rate(BER) and block error(BLER) for any block size.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.2
• /
• pp.87-94
• /
• 2018

In this study, seismic performance of bushings and their connection parts was analyzed by performing shaking table tests for various types of bushings widely used as auxiliary equipment of main transformers in domestic substations. As a result of the seismic tests of five types of 154 kV bushings according to the manufacturers, all the bushings secured the structural integrity even at the acceleration of 1.4 g and it was found that leakage of insulating oil didn't occur. Also, the average acceleration amplification rate at the upper part of the bushings was about 2.5 to 3.0 times higher than the lower one. On the other hand, when a representative 345 kV bushing was subjected to the seismic test, the structural integrity was secured even at 1.0 g acceleration similar to the design earthquake load level, but in this test, leakage of insulating oil occurred. However, when a stiffener restricting the connection of the bushing is installed in the same 345 kV bushing, the displacement of the bushing connection is controlled and the stiffener prevent the oil from leaking even at the acceleration of the designed seismic level.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.173-179
• /
• 2017

Recently, with the development of IoT, there have been increasing cases of transmitting and receiving data by connecting more than one devices supporting various communication methods. In this paper, we propose a multi-terminal emulator supporting various communication methods. The system supports multiple channel connections for each communication method, schedules data transmission, collects communication statistics, represents them into graphs, and stores log records. By using this system, it is possible to test the communication connection between multiple devices, and it is expected to provide convenience for IoT system development.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1077-1082
• /
• 2016

IDS can be used as a countermeasure for malicious attacks which cause degrade of network transmission performance by disturbing of MANET routing function. In this paper, effects of IDS for transmission performance on MANET under grayhole attacks which has intrusion objects for a part of transmissions packets, some suggestion for effective IDS will be considered. Computer simulation based on NS-2 is used for performance analysis, performance is measured with VoIP(: Voice over Internet Protocol) as an application service. MOS(: Mean Opinion Score), CCR(: Call Connection Rate) and end-to-end delay is used for performance parameter as standard transmission quality factor for voice transmission.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2010

Recently, the transmission amount of information that each single person requires is growing by development of electron information communication technology. So in this paper we analysis the phase noise characteristics to obtain a most suitable of SNR performance request characteristic by BER on CATV transmission system that satisfy performance request DOCSIS 2.0 standard. Especially we get the parameter value of PLL that satisfy phase noise characteristic request standard using developed simulator. Presented method can be used to obtain a performance request standard connection performance request standard of high speed CATV transmission system in the future.