• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.1
• /
• pp.72-77
• /
• 2015

When connecting 6 lead wires from stator windings to the terminals of 3 phase induction motors for Y or ${\triangle}$ connection, it is feared that the polarities of windings could be reversed each other if the wire tags are lost or erased, resulting in inadmissibly high current to motors in case of starting. To protect motors against such situations, some test procedures are necessary during wire connection which need to be easy ways to electricians without particular tools except a general multi-tester and with less time-consuming in the field. This study focuses on a test measure to satisfy these requirements which is able to provide them a convenient procedure for winding polarity discrimination considering the field condition. Here, the proposed measure utilizes the residual magnetism of the rotor and checks the indication of voltage or current at windings which are induced by the residual flux of rotor when rotating it by hands with 3 stator windings connected in the form of I connection. Principle characteristics and experiment results for this method are analyzed in the view of the effectiveness and applicability for the winding polarity discrimination.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.1
• /
• pp.11-19
• /
• 2013

This research presents that seismic performance of steel moment resisting frame building designed by past provision(UBC, Uniform Building Code) before and after retrofitted with BRB (Buckling-Restrained Brace) was evaluated using response modification factor (R-factor). In addition, the seismic performance of the retrofitted past building was compared with that specified in current provision. The past building considered two different connections: bilinear connection, which was used by structural engineer for building design, and brittle connection observed in past earthquakes. The nonlinear pushover analysis and time history analysis were performed for the analytical models considered in this study. The R-factor was calculated based on the analytical results. When comparing the R-factor of the current provision with the calculated R-factor, the results were different due to the hysteresis characteristics of the connection types. After retrofitted with BRBs, the past buildings with the bilinear connection were satisfied with the seismic performance of the current provision. However, the past buildings with the brittle connection was significantly different with the R-factor of the current provision.

• Journal of Information Technology Services
• /
• v.8 no.1
• /
• pp.193-202
• /
• 2009

Cloud computing emerges as a new computing paradigm which targets reliable and customizable services. The term builds on decades of research in virtual machine, distributed and parallel computing, utility computing, and more recently networking, web service, and software as a service. In this paper, we provide a seamless connection migration of web services. This is useful for cloud computing environment in which many client terminals have mobility. With the wireless internet facility, those mobile users can move place to place during internet communication. Therefore, we provide solutions to the two major problems in current virtualization based migration: communication failure problems and connection re-establishment. Communication channel flushing by zero window notification helps to resolve the communication failure problems and TCP port inheritance prevents connection re-establishment errors during socket reconstruction. Thus, our web service migration facility is now able to preserve open network connections, and even for server sockets. This is a highly transparent approach, in that we did not Introduce additional messages for channel flushing and did not make any modification to the TCP protocol stack. Experimental results show that the overhead due to connection migration of web services is almost negligible when compared with time to take the conventional web service migration.

• Structural Engineering and Mechanics
• /
• v.68 no.5
• /
• pp.591-601
• /
• 2018

Non-moment beam-to-column connections, which are usually referred to as simple or shear connections, are typically designed to carry only gravity loads in the form of vertical shears. Although in the analysis of structures these connections are usually assumed to be pinned, they may provide a small amount of rotational stiffness due to the typical connection details. This paper investigates the effects of this small rotational restraint of simple beam-to-column connections on the behavior and seismic response of steel braced non-moment resisting frames. Two types of commonly used simple connections with bolted angles, i.e., the Double Web angle Connection (DWC) and Unstiffened Seat angle Connection (USC) are considered for this purpose. In addition to the pinned condition - as a simplified representation of these connections - more accurate semi-rigid models are established and then applied to some frame models subjected to nonlinear pushover and nonlinear time history analyses. Although the use of bracing elements generally reduces the sensitivity of the global structural response to the behavior of connections, the obtained results indicate considerable effects on the local responses. Namely, our results show that consideration of the real behavior of connections is essential in designing the column elements where the pin-connection assumption significantly underestimates design of outer columns of upper stories.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.198-205
• /
• 2022

Along with a variety of coding education, physical computing education for controlling various sensors is being actively conducted for elementary, middle, and high school students in line with the era of the fourth industrial revolution. A problem with physical computing education using Arduino is pin connection errors between Arduino and various sensors. Most of the students who come into contact with the Arduino for the first time often do not know the purpose of the Arduino pin and the connection position of the pin. Also, hardware built with incorrect pin connections to the Arduino board often does not work properly. If this case continues, students will lose interest in coding education. Therefore, in this paper, we implemented an augmented reality application that informs the connection process of the Arduino board and the sensor during physical computing coding education using Arduino, and designed and implemented educational content for the Arduino pin position and connection process. First, we explain the role of the Arduino board and the sensor and the location of the pins. After that, the students run the educational augmented reality educational content using their smartphones and check the correct pin connection process between the Arduino and the sensor. In the physical computing education, augmented reality content is used to increase the understanding and immersion of the class. It is expected that the educational effect will also increase by inducing fun and interest in physical computing coding education.

• Journal of Aerospace System Engineering
• /
• v.15 no.4
• /
• pp.11-20
• /
• 2021

The estimation of hovering flight time of multicopters using the battery power propulsion system is important for the development and design of the aircraft and its operation. For a given operational weight, the maximum possible battery weight can be decided using both a conventional energy density method and a new Peukert law. In the present study, the hovering flight time is predicted using both methods. The specific data of multicopters in the published literatures were employed for the computation of the hovering flight time. The results were validated with the measured data. The effect of figure of merit of propeller, battery discharging process on the hovering flight time was evaluated, Finally, the effect of the battery cell and package connection types on the hovering time was investigated. It was found that the combination of serial battery cell connections and parallel package connection is the bast in the endurance maximization aspect. As the cell number increases in a package, the hovering flight time is increased. There exists the max. battery ratio for the given takeoff gross weight.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.301-307
• /
• 2005

We introduce a new multimedia telemedicine system which is called Telemedicine for Real-time Emergency Multi-consultation(TREM), based on multiple connection between medical specialists. Due to the subdivision of medical specialties, the existing one-to-one telemedicine system needs be modified to a simultaneous multi-consulting system. To facilitate the consultation the designed system includes following modules: high-quality video, video conferenceing, bio-signal transmission, and file transmission. In order to enhance the operability of the system in different network environment, we made it possible for the user to choose appropriate data acquisition sources of multimedia data and video resolutions. We have tested this system set up in three different places: emergency room, radiologist's office, and surgeon's office. All three communicating systems were successful in making connections with the multi-consultation center to exchange data simultaneously in real-time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.118-123
• /
• 2007

This paper studied the transmission control protocol over IP network to enhance the performance of the GSO satellite communication networks. The focus of this study is how to reduce the long round trip time and the transmission data rates over satellite link in the bidirectional satellite network. To do it, this study applied the caching and spoofing technology. The spoofing technology is used to reduce the required time for the link connection during communication. The caching technology is to improve the transmission bandwidth efficiency in the high transmission data rate link The tests and measurements in this study was performed in the commercial GSO communication satellite network and the terrestrial Internet network. The results of this paper show that the studied protocol in this paper highly enhance the performance of the bidirectional satellite communication network compare to the using TCP/IP satellite network protocol.

• Journal of information and communication convergence engineering
• /
• v.20 no.3
• /
• pp.160-165
• /
• 2022

This paper proposes an efficient method of reconstructing interconnections when the terminals of each plane change in real-time situations where randomly divided planes are interconnected. To connect all terminals when the terminals of each plane are changed, we usually reconstruct the interconnections between all terminals. This ensures a minimum connection length, but it takes considerable time to reconstruct the interconnection for the entire terminal. This paper proposes a solution to obtain an optimal tree close to the minimum spanning tree (MST) in a short time. The construction of interconnections has been used in various design-related areas, from networks to architecture. One of these areas is an ad hoc network that only consists of mobile hosts and communicates with each other without a fixed wired network. Each host of an ad hoc network may appear or disappear frequently. Therefore, the heuristic proposed in this paper may expect various cost savings through faster interconnection reconstruction using the given information in situations where the connection target is changing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1719-1729
• /
• 1994

In this paper, an adaptive CAC(Connection Admission Control) method is proposed. The adaptive CAC uses traffic estimates derived from both traffic parameter specified by user and cell flow measurements. Traffic estimation using user-specified parameters is performed at every moment of connection request or connection release by recursive formula which makes real-time calculation possible. Traffic estimation using cell flow measurement is carried out when the number of connected calls does not change during a measurement reflection period-renewal period. The most import ant thing for the traffic estimation using cell flow measurement is the determination of the length of a renewal period to trace a real traffic flow with an allowable time lag and the measurement reflection ratio(MRR) both to reduce the portion of overestimation and to avoid underestimation of real traffic flow. To solve these problems, the adaptive CAC updates renewal period and MRR adaptively according to the number of connections and the elapsed time after last connection or release respectively. Performance analysis for the proposed method is evaluated in several aspects for the cases of both homogeneous and heterogeneous bursty traffic. Numerical examples show the adaptive CAC method has the better performance compared with conventional CAC method based on burst model from the both utilization and QOS point of view.