Browse > Article
http://dx.doi.org/10.5000/EESK.2013.17.1.011

Evaluation of Response Modification Factor of Steel Special Resisting Frame Building Before and After Retrofitted with Buckling Restrained Brace  

Shin, Jiuk (Building Research Dept., Korea Institute of Construction Technology)
Lee, Kihak (Dept. of Architectural Engineering, Sejong University)
Jo, Yeong Wook (Structural Team, Samsung C&T)
Publication Information
Journal of the Earthquake Engineering Society of Korea / v.17, no.1, 2013 , pp. 11-19 More about this Journal
Abstract
This research presents that seismic performance of steel moment resisting frame building designed by past provision(UBC, Uniform Building Code) before and after retrofitted with BRB (Buckling-Restrained Brace) was evaluated using response modification factor (R-factor). In addition, the seismic performance of the retrofitted past building was compared with that specified in current provision. The past building considered two different connections: bilinear connection, which was used by structural engineer for building design, and brittle connection observed in past earthquakes. The nonlinear pushover analysis and time history analysis were performed for the analytical models considered in this study. The R-factor was calculated based on the analytical results. When comparing the R-factor of the current provision with the calculated R-factor, the results were different due to the hysteresis characteristics of the connection types. After retrofitted with BRBs, the past buildings with the bilinear connection were satisfied with the seismic performance of the current provision. However, the past buildings with the brittle connection was significantly different with the R-factor of the current provision.
Keywords
Steel Special Moment Resisting Frame (SMRF); Response Modification Factor (R-Factor); Buckling-Restrained Brace (BRB); Past Provision (UBC); Current Provision (IBC2012);
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Ministry of Science and Technology. Grading of a Seismic Performance and Development of Seismic Strengthening Design Methods for Remodeling of Deteriorated Apartment Houses. 2004.
2 Sarno LD, Elnashai AS. Bracing Systems for Seismic Retrofitting of Steel Frames. Journal of Constructional Steel Research. 2009. 65(2):452-465.   DOI   ScienceOn
3 Architectural Institute of Korea. Korea Building Code - KBC 2009, 2009.
4 Han SW, Oh YH, Lee LH. Investigation on Response Modification Factor of RC Structural Walls in Apartment Buildings. Journal of the Korea Concrete Institute 2001;13(6):544-552.   과학기술학회마을
5 Kim J., Nam K. Response Modification Factors of Inverted V-type Ordinary Concentrically Braced Frames. Journal of Earthquake Engineering Society of Korea. 2004;8(3):53-61.   과학기술학회마을   DOI   ScienceOn
6 Kim J., Park JH. Response Modification Factors of Buckling-Restrained Braced Frames. Journal of the Architectural Institute of Korea. 2005;21(9):19-25.   과학기술학회마을
7 Lee JH, Jeon Y, Kim J. Response Modification Factors of Rectangular Staggered Wall System Buildings. Journal of the Architectural Institute of Korea. 2011;27(7):77-84.   과학기술학회마을
8 Yoon JB, Lee CH, Choi JW. Song JG. Estimation of R-factor and Seismic Performance for RC IMRFs using N2 Method. Journal of Earthquake Engineering Society of Korea. 2002;6(6):33-39.   과학기술학회마을   DOI   ScienceOn
9 Black C, Makris N, Aiken I. Component testing, Stability Analysis and Characterization of Buckling Restrained Unbonded Braces, Report No. PEER-2002/08: PEERC, University of California at Berkeley. California. 2002.
10 ATC. A Critical Review of Current Approaches to Earthquake-Resistant Design. ATC Report-34, CA. 1995.
11 Newmark NM, Hall WJ. Earthquake Spectra and Design. EERI Monograph Series, EERI, Oakland, CA. 1982.
12 Nassar A, Krawinkler K. Seismic Demands for SDOF and MDOF. Dept. of Civil Engineering Stanford University. 1991.
13 ICC, International Building Code (IBC). International code council, INC. 2012.
14 Miranda E, Bertero VV. Evaluation of Strength Reduction Factors for Earthquake Resistant Design. Earthquake Spectra, EERI. 1994;10(2):357-379.   DOI   ScienceOn
15 ICBO. Uniform Building Code. International Conference of Building Officials, Whittier, CA. 1997.
16 ICBO. Structural Engineering Design Provisions. Uniform Building Code, Vol. 2, International Conference of Building Officials, 1997.
17 Lee K, Foutch DA. Performance Prediction and Evaluation of Steel Special Moment Framess for Seismic Loads. SAC Background Report No. SAC/BD-00/25, 2000.
18 Venti M, Engelhardt MD. Brief Report of Steel Moment Connection Test. Specimen DBBW (Dog Bone-Bolted Web). Internal SAC phase 2 report. 1999.
19 Kim J, Park JH, Lee K, Lee J. Seismic performance of Buckling Restrained Braces Using Steel Plates and Channel Sections. Journal of the Architectural Institute of Korea. 2007;23(10):19-26.   과학기술학회마을
20 Prakash V, Powell GH, Campbell S. Drain-2DX: Element description and user guide. Univ. of California, Berkeley, CA. 1993.
21 Shi S, Foutch DA. Connection element (type 10) for Drain-2DX. Civil Eng. Report. Univ. of Illinois at Urbana-Champaign, IL. 1997.
22 Shin J, Lee K, Jeong SH. Seismic Performance Evaluation of Steel Moment Resisting Frame with Various Hysteresis Connection Models. Journal of the Architectural Institute of Korea. 2009;25(11): 19-27.   과학기술학회마을
23 Somerville P, Smith N, Puntamurthula S, Sun J. Development of ground motion time histories for phase 2 of the FEMA/SAC steel project. SAC Background Document SAC/BD-97/04, SAC Joint Venture, Richmond, CA. 1997.