• 한국콘텐츠학회논문지
• /
• 제10권1호
• /
• pp.181-191
• /
• 2010

출범 3주년을 맞은 IPTV의 가입자 규모가 2009년 8월 현재 170만 가구를 넘어서면서, 가입자들의 VOD 수용 방식에도 변화가 예상되고 있다. 즉, 기존 미디어의 소극적 수용 방식과 달리 VOD 서비스는 능동적 선택에 의한 비선형적 시청이 가능하기 때문이다. 따라서 이 연구에서는 VOD 서비스를 실제로 이용하고 있는 경험자들을 대상으로 서비스 이용 태도를 보다 구체적으로 살펴보고자 한다. 분석 결과, 조사 대상자들은 IP-VOD 서비스로 지상파 방송 프로그램을 가장 많이 보고 있었으며, 무엇보다 버라이어티 프로그램을 선호하는 것으로 나타났다. 또한, 응답자의 절반 이상이 주 2-3회 정도 VOD 서비스를 이용하며, 1회 시청 양은 2-3시간에 이른다고 응답했다. 한편, 주말에는 최대 8시간 이상을 연속해서 이용하는 사례도 나타나, 일부 이용자들의 VOD 중독현상이 우려되고 있다.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.661-671
• /
• 2011

This study was designed to produce rounded belt pattern and tight-skirt pattern drafting method using 3D body scan data. Subjects were thirty women in their early twenties. In order to figure out the optimum cutting points, namely, where darts are made, using CAD program, curve ratio inflection points on the horizontal curve of waist, abdomen, and hip to find 1 point in the front, two points in the back part. The average length from center front point to maximum curve ratio was 7.7 cm(46.3%) on the waist curve; 7.9 cm(39.4%) on the abdomen curve. And the average length from center back point to maximum curve ratio point was 6.9 cm(39.0%) for first dart and 11.2 cm(63.3%) for second dart on the waist curve; 8.9 cm(35.8%) for first dart and 15.7 cm(63.3%) for second dart on the hip curve respectively. The cutting lines from were made up by connecting curve inflection points. After divided using cutting lines, each patch was flattened onto the plane and all the technical design factors related with patternmaking were measured, such as dart amount, lifting amount of side waist point, etc. Based on the results of correlation analysis among these factors, regression analysis was done to produce equations to estimate the variables necessary to draw up pattern draft method; F1=F8+1.1, $F4=2.5{\times}F2+0.9$, $F5=0.9{\times}F4+1.0$, $F6=0.3{\times}F4+0.4$, $B1=0.9{\times}B8+2.3$, $B4=2.1{\times}B2+1.3$, $B5=0.9{\times}B4+3.5$, and $B6=0.3{\times}B4+0.4$.

• 한국의류산업학회지
• /
• 제21권3호
• /
• pp.267-276
• /
• 2019

This study develops 3D-printed-garment collections for a fashion show presentation. A design concept using traditional patterns that consisted of garments regarding the limitation of the printing technology was investigated in order to develop the collection. The structures of the connecting joints of the textile parts which could be easily and sturdily interconnected were invented. Wearability as garments that could be naturally worn on the human body were sought. As a result, four 3D-printed-garments were developed. The 1st garment composed of objects based on a 'Yeon-Dang-Cho'-pattern was constructed as a geometric robe style using a FDM 3D printer and transparent TPU filaments. The 2nd and 3rd 3D-printed-garments composed of an object based on a 'Boe-Sang-Hwa'-pattern was constructed as a distorted one-piece exaggerating the silhouettes of shoulders and waist parts as well as a straight asymmetric tunic style that used the same printer and material as the 1st garment. The last garment composed of an object based on a 'Boe-Sang-Hwa'-pattern printed using a SLA 3D printer and flexible-liquid-resin was constructed attaching the objects on the fabric material by the hot-press machine. The four developed garments were presented in the opening fashion show of 'the 6th International 3D-printing Korea Expo'. This study provides a basic case for related studies to adapt 3D-printing technology in textile pattern development of garment construction.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권8호
• /
• pp.281-286
• /
• 2018

최근 정보의 복잡성과 다양성 및 방대한 양의 가용 정보가 증가함에 따라 대규모 데이터로부터 의미 있는 검색 결과를 추출하는 방법으로서 온톨로지에 대한 관심과 필요성이 증가하고 있다. 주어진 자연어 텍스트로부터 온톨로지를 추출하는 많은 방법이 제안되었지만, 현재 대부분의 방법은 온톨로지의 구조에 일치되도록 추출하지 못하는 실정이다. 본 논문에서는 온톨로지를 구축하기 위해 필요한 용어를 특정 도메인에서 주어진 텍스트와 구별하고 패턴 기반 방법을 기반으로 용어 사이의 다양한 관계를 추출하는 방법을 제안한다. 용어들 간의 관계를 추출하기 위해 일치 패턴 집합을 고려하고 조인 집합 개념과 패턴의 정렬을 연결하여 검색 공간의 크기를 줄이는 방법을 제안한다. 그 결과 이 방법이 검색 공간으로부터 유용한 어떤 패턴도 제거하지 않고 50-95% 정도로 검색 공간의 크기를 줄이는 결과를 보였다.

• 한국전자파학회논문지
• /
• 제22권12호
• /
• pp.1176-1179
• /
• 2011

본 논문에서는 밀리미터파 대역 응용을 위해 직렬 급전 마이크로스트립 배열 안테나를 이용하여 합 및 차 패턴을 구현하였으며, 안테나는 첨예한 빔 패턴을 가지면서도 부엽 레벨(SLL)이 -20 dB가 되도록 설계 및 제작하였다. 등간격의 직렬 급전 배열 안테나를 전송 선로 등가 회로 모델로 해석하였으며, Taylor 및 Bayliss 분포를 적용하여 합/차 패턴을 생성할 수 있는 급전 여기 전류 분포를 구하였다. 또한, 패치를 잇는 연결선의 길이를 적절히 조절하여 최적화된 복사 패턴을 구현하였다. 35 GHz 밀리미터파 대역에서 시뮬레이션 및 실험 결과를 서로 비교함으로써 설계한 안테나의 타당성을 입증하였다.

• Journal of the korean society of oceanography
• /
• 제32권1호
• /
• pp.1-7
• /
• 1997

Surface current fields in the eastern East China Sea (ECS) were constructed by analyzing trajectories of 58 satellite-tracked surface drifters released during 1991-1996. Composite trajectories and 20-minute-by-20-minute box-averaged current vectors show that the basic current pattern composes of: the Kuroshio main stream, which turns eastward toward the Tokara Strait; a northward branch current of the Kuroshio on the ECS outer shelf deeper than 100 m; and an anticyclonic circulation in the northern Okinawa Trough west of Kyushu. The northward branch current sharply changes its direction to the northeast when it crosses a line connecting Cheju Island, Korea and Goto Islands, Japan. The basic pattern of current field changes slightly from winter to summer, and the main axis of the Tsushima Current in the Korea Strait is found to shift seasonally. The drifter experiment does not support the claim that the Yellow Sea Warm Current is separated from the northward branch current on the outer shelf southeast of Cheju Island. We suggest that the use of the term 'Tsushima Current' be limited to the northeast channel flow in the Korea Strait. The new term 'Kuroshio Branch Current' is suggested for the northward branch current on the outer shelf south of Cheju-do, which is separated from the Kuroshio.

• 한국정보전자통신기술학회논문지
• /
• 제10권5호
• /
• pp.396-401
• /
• 2017

본 논문은 블루투스와 다른 장치를 연결하였을 때 블루투스와의 간섭 현상에 대한 해결 방안을 제시한다. 랜덤 주파수 도약 기법은 무선랜 간섭을 고려하지 않고 블루투스 전체 채널을 이용하여 도약 패턴을 생성하는 기법이다. 제안된 적응적 주파수 도약 기법은 블루투스의 주기적인 캐리어 센싱을 통해 무선랜 간섭을 고려하여 블루투스 채널의 도약 패턴을 생성하는 기법이다. 모의실험을 통해 무선랜 간섭이 혼잡한 상황에서도 블루투스 캐리어 센싱 간격이 줄어들수록 적응적 주파수 도약 기법을 사용하면 패킷 오류율이 감소되는 것을 확인하였다. 특히 주파수 도약 기법은 적응적 주파수 도약 기법 대비 평균 패킷 오류율은 약 13%의 성능 향상이 있었다.

• 한국물환경학회지
• /
• 제30권5호
• /
• pp.477-485
• /
• 2014

Imha Reservoir is connected to Andong Reservoir via a diversion tunnel allowing water to pass between. The diversion tunnel is equipped with screens to exclude exotic largemouth bass due to their predatory impacts on prey assemblages resulting in a degradation of species richness of local fish fauna and extinction of local fish populations in Korea. Flow pattern changes resulting from the fish screens and trash racks were investigated using a computational fluid dynamics (CFD) model. Numerical simulations showed that the decrease in the discharge capacity of the tunnel is approximately 8.6% and the headloss coefficient for fish screen at Andong intake tower was determined to be 1.5. In order not to allow the small fishes enough to pass through the wire openings enter into Imha Reservoir through tunnel, the velocity in the tunnel should be greater than 1.48 m/s which is a critical ascending velocity of the bass. This study suggests that it can keep the velocity higher enough to exclude largemouth bass when a gate opens with the condition of 1.0m difference in water stage between two reservoirs.

• 제어로봇시스템학회논문지
• /
• 제7권1호
• /
• pp.1187-1195
• /
• 2001

This paper presents a sweeping path planning algorithm for an autonomous smearing robot. An automatic planner generates a sweeping path pattern by proposed five basic procedures. This algorithm rocog-nizes obstacle on the architectural CAD draft and generates subgoals as tracking points which executes the area filling task based on heuristic approach. A sweeping path is planned by sequentially connecting the track-ing points in such a way that(1) the connected line segments should not be crossed, (2) the total tracking points should be as short as possible, and (3) the tracking line should not pass through the obstacle, Feasibility of the developed techniques has been demonstrated on a real architectural CAD draft.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제18권4호
• /
• pp.273-288
• /
• 2014

In recent years, coding education has been globally emphasized and the Free Semester System will be executed to the public schools in Korea from 2016. With the introduction of the Free Semester System and the rising demand of Computational Thinking (CT) capacity, this research aims to design 'learning environment' in which learners can design and construct mathematical objects through computers and print them out through 3D printers. Furthermore, it will design learning mathematics by constructing the figurate number patterns from 'soma cubes' in the playing context and connecting those to algebraic and combinatorial patterns, which will allow students to experience mathematical connectivity. It is expected that the activities of designing figurate number patterns suggested in this research will not only strengthen CT capacity in relation to mathematical thinking but also serve as a meaningful program for the Free Semester System in terms of career experience as 3D printers can be widely used.