• Journal of Biosystems Engineering
• /
• v.27 no.5
• /
• pp.391-398
• /
• 2002

During handling unitized products, they are subjected to a variety of environmental hazards. Shock and vibration hazards are generally considered the most damaging of the environmental hazards on a product and it may encounter while passing through the distribution environment. A major cause of shock damage to products is drops during manual handling. The increasing use of unitization of pallets has been resulted in a reduction of the shock hazards. This has caused an increasing interest in research focused on vibration caused dam age. Damage to the product by the vibration most often occurs when a product or a product component has a natural frequency that falls within the range of the forcing frequencies of the particular mode of transportation being used. Transportation vibration is also a major cause of fruit and vegetable quality loss due to mechanical damage. This study was conducted to determine the vibration characteristics of the corrugated fiberboard bones for packages of pears, and to investigate the degree of vibration injury of the pears in the boxes during the simulated transportation environment. The vibration tests were performed on an electrohydraulic vibration exciter. The input acceleration to exciter was fixed at 0.25 G for a single container resonance test and 0.5 G for the vertical stacked container over the frequency range from 3 to 100 Hz. Function generator (HP-33120A) was connected by wire to the vibration exciter for controlling the input acceleration at a continuous logarithmic sweep rate of 1.0 octave per min. The peak frequency and acceleration on the single box test were 22.02 Hz, 1.5425 G respectively, and these values on the vertical stacked boxes were observed from the bottom box 19.02, 18.14, 16.62 and 15.40 Hz and 2.2987, 3.7654. 5.6087, and 7.9582 G, respectively. The pear in the bottom box had a slightly higher damage level than the fruit packed in the other stacked boxes. It is desirable that the package and transportation system has to be so designed that 15∼20 Hz frequency will not occur during the transportation environment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.10-17
• /
• 2013

In this paper, a new active damping method of LCL filter without capacitor voltage sensors is proposed for 3 phase PWM Inverter. Normally, L filter or LCL filter is used as an output filter of grid connected PWM inverter. An LCL filter has more excellent performance than L filter to reduce harmonic current, so the small inductance value can be used. However, the resonance problem in LCL filter is happen due to the zero impedance by the addition of LC branch. To solve the resonance problem, the various active damping method has been proposed so far. Generally, the virtual resistor active damping methods is required to additional hardware sensors for measurement of capacitor voltage and current. In this paper, the new active damping method is proposed without any capacitor voltage or current sensors. In the proposed method, the resonance component of the capacitor voltage of LCL filter can be observed by a simple MRAS(Model Reference Adaptive System) observer without additional hardware sensors, and this component is suppressed by feedforward compensation. The validity of the proposed method is proven by simulation and experiment on the 3-phase PWM inverter system.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.986-996
• /
• 1994

Insulation system of LNG carrier has made important roles such as maintaining a proper Boil off Ratio(BOR) for the cargo and avoiding the excessive low temperature of the adjacent inner hull beyond the permissible limit. At the same time, safety and economy of the LNG transportation by the ship are connected with the performance of the insulation system. Also, thermal insulation system of LNG carrier is one of the most advanced technique with the structure analysis of tank, welding and assembling. In this study a computer program is developed to calculate the hull temperature distribution and BOR, which are important factors in thermal design for the Moss Rosenberg Verft spherical tank type LNG carrier. Detailed results for hhull temperature distribution close to LNG tank, BOR and the thickness effect of insulation material are reported in this paper in the range of standare design sea condition.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.78-84
• /
• 2017

This paper investigates the influence of mechanical energy storage on the interior permanent magnet synchronous machine (IPMSM) when it is operated in the generating mode. An IPMSM with six-poles and nine-slots employing concentrated coil winding type is considered as the analysis model, and a surface-mounted permanent magnet synchronous motor directly connected to a heavy wheel is applied as the mechanical energy storage system by using the moment of inertia. Based on the constructed experimental set-up with manufactured machines and power converters, the generated electrical energy is converted into the mechanical energy, and the electromagnetic filed characteristics of IPMSM are subsequently investigated by applying the measured phase current of IPMSM based on finite element method. Compared to the characteristics in a no-load condition, it is confirmed that the magnetic behavior, radial force, and power loss characteristics are highly influenced by the harmonics of the phase current due to the mechanical energy storage system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1312-1319
• /
• 2006

Several countries including Korea, Japan and European countries have reached the stage of planning, constructing their high-speed railway systems. High-speed train will become a key tool for intercity passenger transportation. Before that, safety of high-speed train must be secured. It is connected directly with track. The track is composed of ballast, tie, fastening and rail. Also, the fastening system makes tie and rail connect. In this case of the railway bridges used concrete slab track, the deflection of the bridge cause uplife of the rail at the areas between segments. In the structural analysis about it, stiffness of the fastening systems has been assumed. Therefore, use of the stiffness according to an experimental study needs. In this study, the stiffness values of various types of fastening systems are determined by the experiment and the structural behavior of fastening system is analyzed.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.501-508
• /
• 2005

The purpose of this paper is to present the alternatives for improving coostal shipping logistics system to be a logistic hub-nation with a competitive edge. For this purpose, major environmental factors in Northeast Asia and accordingly its effects are analyzed And then the effects of coastal shipping system's development strategy is analysed using Structural Equation Model and Multiple Regression Model. Research results show that three types of coastal shipping development strategy( connected transportation system, structure of coastal shipping system, governmental support policy) will contribute much to being a logistics hub-nation. From the results, some implications are derived as follows. Firstly, environmental-friendly balanced ocean-coastal transport system is required Secondly, a excusive feeder port, Ro-Ro ship & high-speed ship are necessary to establish the one-stop logistics service system Finally, governmental support policy and subsidy(tax-exempted oil & various tax benefits) are required to reactivate lagged coastal shipping system to be a logistic hub-nation with a competitive edge.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.441-449
• /
• 2005

The purpose of this research is to present the improvement measure of lagging behind coastal shipping system to be a logistic hub-nation with a competitive edge. For this purpose, this research tries to find out major northeast asia environment factors and accordingly the effects of its. The effects of coastal shipping system's development strategy is analysed by structural equation model and multiple regression model. Research results show that three types of coastal shipping developing strategy(connected transportation system, structure of coastal shipping system, governmental support policy) will contribute much to be logistic hub-nation. The contribution effects is increasing cargo from strengthened feeder transport system and maximizing logistic service &minimizing logistic costs. From the result, some implications are derived as follow. First, familiar environmental balanced ocean-coastal transport system is required. Second the one-stop logistic service system is necessary to build excusive feeder port, and to establish Ro-Ro ship & high-speed ship, etc.. Third, governmental support policy and subsidy(tax exempted oil & various tax benefits) are required to bring up lagging behind coastal shipping system to be a logistic hub-nation with a competitive edge.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.1-13
• /
• 2010

In this paper, we describe the result of the test-bed on Nation-wide Interoperable Transportation System connected with Interoperable Traffic Information Collection System, which was developed by Korea Financial Telecommunications & Clearings, KOREAIL NETWORKS, HiPlusCard and Samsung SDS. we constructed Nation-wide Interoperable Transportation System on 4 downtown bus routes, 20 stations on line 1 subway, 2 stations of a train and 2 sections of the Honam highway in Gwangju and Interoperable Traffic Information Collection System in Seoul University IC Card Center. So we operated that by 480 Several staff were given a test card and asked to try it for about 6 months. This test-bed is for demonstrates the accuracy, safety and credibility of the Nation-wide Interoperability standard technology and it can be applied to all of transportation practically. When the staffs contact the card to Purchase terminal, the card performs transaction with Purchase SAM in the terminal, then transactions ara used to calculate in Settlement system and Interoperable Traffic Information Collection System. Through the test-bed, we examined this process and found unexpected problems happening during the test operation and have successfully solved them. In addition, the results of the test-bed let us know what additional improvement might be required for System. The successful run of the test-bed was verified by an evaluation of the test-bed staff and a public survey.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.107-118
• /
• 2022

As connected and automated driving(CAD) technology is entering its commercialization stage, service platforms providing CAD-based mobility services have increased these days. However, CAD-baded mobility services with these platforms need more consideration for the demand for mobility services when determining target areas for CAD-based mobility services because current CAB-based mobility design focus on driving performance and driving stability. For a more efficient design of CAD-based mobility services, we analyzed the applicability for the introduction of CAD-based mobility services in terms of driving difficulty of CAD and demand patterns of current non-CAD based-mobility services, e.g., taxi, demand-responsive transit(DRT), and special transportation systems(STS). In addition, for the spatial analysis of the applicability of the CAD-based mobility service, we propose the Index for Autonomous Driving Applicability (IADA) and analyze the characteristics of the spatial distribution of IADA from the network perspective. The analysis results show that the applicability of CAD-based mobility services depends more on the demand patterns than the driving difficulty of CAV. In particular, the results show that the concentration pattern of demand in a specific road link is more important than the size of demand. As a result, STS service shows higher applicability compared to other mobility services, even though the size of demand for this mobility service is relatively small.