• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.368-371
• /
• 2020

In this paper, we propose a linear tapered slot rectifying antenna for a portable UHF-band RFID system. Since the proposed rectifying antenna does not use a dielectric substrate, the planar antenna is implemented with a thin metal thickness. The rectifier circuit converts input RF power into output DC voltage using a voltage doubler circuit based on two anti-parallel schottky diodes. The rectifying antenna is integrated by the voltage doubler circuit into a linear tapered slot antenna. For conjugate impedance matching of the rectifying circuit and the linear tapered slot antenna, the source-pull method was utilized by adjusting the angle of the tapered slot and the length of the antenna feed line. The proposed antenna prototype has been verified with the electrical and radiation characteristics through RF-DC conversion and far-field radiation test in open space measurement environment. Finally, the proposed antenna is realized to 0.23-wavelength (75 mm) and 0.18-wavelength (60 mm) at 915 MHz center frequency.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.137-140
• /
• 2003

Recently, CG (Conjugate Gradient) scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for interior eigenvalues for the following eigenvalue problem, Ax＝λx (1) The given matrix A is assummed to be large and sparse, and symmetric. Also, the method is very amenable to parallel computations. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. We compare the parallel preconditioners for the computation of the interior eigenvalues of a symmetric matrix by CG-type method. The considered preconditioners are Point-SSOR, ILU (0) in the multi-coloring order, and Multi-Color Block SSOR (Symmetric Succesive OverRelaxation). We conducted our experiments on the CRAY­T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test matrices are up to $512{\times}512$ in dimensions and were created from the discretizations of the elliptic PDE. All things considered the MC-BSSOR seems to be most robust preconditioner.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.14-22
• /
• 1994

This paper proposes two Bayes estimators and their evaluation algorithms of the software reliability at the end testing stage in the Smith's Bayesian software reliability growth model under the data prior distribution BE(a, b), which is more general than uniform distribution, as a class of prior information. We consider both a squared-error loss function and the Harris loss function in the Bayesian estimation procedures. We also compare the MSE performances of the Bayes estimators and their algorithms of software reliability using computer simulations. And we conclude that the Bayes estimator of software reliability under the Harris loss function is more efficient than other estimators in terms of the MSE performances as a is larger and b is smaller, and that the Bayes estimators using the beta prior distribution as a conjugate prior is better than the Bayes estimators under the uniform prior distribution as a noninformative prior when a＞b.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.137-145
• /
• 2002

In the method of 3D modeling, stereo matching method which obtains three dimensional depth information from the two images is taken from the different view points. In general, it is very essential work for the 3D modeling from 2D stereo images to estimate the exact disparity through fading the conjugate pair of pixel from the left and right image. In this paper to solve the problems of the stereo image disparity estimation, we introduce a novel approach method to improve the exactness and efficiency of the disparity. In the first place, we perform a wavelet transformation of the stereo images and set the reference points in the image by the feature-based matching method. This reference points have very high probability over 95 %. In the base of these reference points we can decide the size of the variable block searching windows for estimating dense disparity of area based method and perform the ordering constraint to prevent mismatching. By doing this, we could estimate the disparity in a short time and solve the occlusion caused by applying the fried-sized windows and probable error caused by repeating patterns.

• Journal of Yeungnam Medical Science
• /
• v.7 no.2
• /
• pp.27-37
• /
• 1990

To investigate the changing patterns of microfilament and microtubule arrangement and influence of myocardial cells and colchicine to microfilament and microtubule formation in cardiac endothelial cells the authors carried out indirect immunofluorescence stain for actin and tubulin with supernatant monoclonal antibodies. Secondary antibodies were IgG FITC conjugate. The results were summerized as follows. Fiberform reactions were stronger in the cells with many processes and spread cytoplasm and they became weaker after the endothelial cells formed monolayer. In the endothelial cells cocultured with myocardial cells the fiberform of the microtubule became less visible compared to control group but fiberform of the microtubule maintained strong intensity as endothelial cells formed monolayer. In the group treated with colchicine, there were no visible differences in microfilaments compared to control group but fiberform of microtubule revealed weaker intensity after colchicine treatment. The intensity of microtubule fiberform returned to control level after 2 days.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.11
• /
• pp.613-620
• /
• 2009

The thermal stresses of a ceramic heat exchanger were analyzed numerically since the ceramic material is good in heat resistance but weak in the thermal stress. The analysis of thermal stress was conducted in the ceramic core with two boundary conditions depending on bolt jointing. The thermal stresses were computed by applying temperature and pressure distributions obtained from the numerical results of conjugate heat transfer to ANSYS WORKRBENCH. When number of bolt joining halls was reduced from $8\times2$ to $4\times2$, the maximum principal stresses decrease by 47.6~50.5% and increase in safety factors by 2.18~2.5 for ultimate tensile strength. Thus, it can be said that bolt joining halls should be minimized in ceramic heat exchanger to be efficient in reducing thermal stress. In addition, the width of particular gas flow passages were revised from 52 mm to 42 mm to reduce maximum thermal stresses since certain passages experienced high thermal stresses. From the revision, safety factors were increased by 13.8~14.1% for the boundary condition of $4\times2$ bolt joining halls. Therefore, it is suggested that thermal stress can be reduced by changing local geometry of a ceramic heat exchanger.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.418-424
• /
• 1984

Rate constants for the hydrolysis of cinnamonitrile in the concentration range of 1 ∼ 5M of perchloric acid at 25$^{\circ}$C have been determined by UV spectrophotometry and from the Bunnett equations, hydration parameters (${\omega}$ = 9.8, ${\omega}^*$ = 0.42 & ${\phi}$=1.6) were obtained. CNDO/2 MO calculations were performed to determine relative stability, net charges, and overlap population of various conformational isomers. The results show that the (E)-planar is more stable than the (Z)-planar and protonation is favored on the nitrogen atom. On the basis of above findings, the acid hydrolysis is initiated by the protonation of the nitrogen atom of cinnamonitrile and then water molecule acting as nucleophile and as a proton transfer agent in the rate determining step. In the transition state of the acid hydrolysis, nucleophilic addition of water molecule occurs by sigma approach to the positively charged $C_7({\alpha}$) atom of the conjugate acid. As the results, we may conclude that the hydrolysis of cinnamonitrile in the strong acidic media proceeds through the A-2 type mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1687-1691
• /
• 2004

Regioselectivity on the reactions of ${\alpha},{\beta}$--enones with organoindium such as in situ generated allylindium and allenylindium was systematically studied in the presence of TMSCl as an additive. Treatment of 2-cyclohexen-1-one, carvone, 2-cyclohepten-1-one, and chalcone with allylindium reagent produced 1,4-addition products in good yields, while 2-cyclopenten-1-one, 2-methyl-2-cyclopenten-1-one, 4,4-dimethylcyclohexen-1-one, 3-nonen-2-one, 4-hexen-3-one, and 4-phenyl-3-buten-2-one afforded 1,2-addition products. Indium reagent derived from indium and propargyl bromide in Grignard type gave addition products in good yields, under which the successive addition of ${\alpha},{\beta}$-enone and TMSCl were necessary. Although organoindium reagent derived from propargyl bromide produced propargylated compound in Grignard type except 2-cyclohepten-1-one, indium reagent obtained from 1-bromo-2-butyne having ${\gamma}$-methyl group gave allenylated product inBarbier type.

• Archives of Pharmacal Research
• /
• v.9 no.2
• /
• pp.99-110
• /
• 1986

In order to use for metabolic studies of tranylcypromine (TCP), TCP-phenyl-$d_{5}$ was synthesized via the intermediates, 3-benzoylpropionic acid-$d_{5}$ and trans-2-phenylcyclopropanecarboxylic acid-$d_{5}$ -TCP(0.22 mmole/kg) and its deuterated analog were administered s. c. to the rats and GC/MS analyses of the urines led to the detection of N-acetyltranylcypromine (ATCP) and glucuronide conjugate of phenyl-hydroxylated ATCP. MAO activities in rat brain were measured using serotonin as the substrate. In vitro $IC_{50}$ of ATCP was determined to be $10^{-3}M$. The inhibitions by ATCP were not dependent on the preincubation time and were reversed by washing sedimented mitochondrial pellets after the preincubation. In vivo MAO inhibitions at various times of 0.5, 1.5, 3, 6, 12, and 23 hr after the administration of 0.4 mmole/kg (i. p. ) of ATCP were found to be 0.13, 73, 90, 89, and 74 %, respectively. Similarly, the inhibition percents by 0.015 mmole/kg (i. p. ) of TCP were 94, 99, 95, 91, 71 and 49%. The results strongly suggest that deacetylated product of ATCP may account for its in vivo MAO inhibition. The relationship between the metabolism via phenyl-hydroxylation and the in vivo potency of TCP was examined by QSAR study and it was found that groupings discriminating between the compounds with p-substituents and those without them only ensure high correlations, suggesting that ring-hydroxylation which occurs at the para position in most of the compounds is a determining factor to the potency of TCP.

• YAKHAK HOEJI
• /
• v.57 no.6
• /
• pp.400-405
• /
• 2013

In this study, we measured the complex efficiency of a physiologically active antibody, a chelator and radiosiotopes using the ESI-TOF/Ms system for develop good radiopharmaceuticals. For a precise measurement, TLC is a low accuracy method. Loading of same amount of sample is difficult for each test, and work to quantify accurately the results obtained through TLC cannot be afforded compared to the use of other analytical instruments. The method of analysis using a mass spectrometer is capable of a mass analysis of proteins for quantitative analysis. The conjugates of the chelator (CHX-A- DTPA) and the antibody (IgG) were separated through MWCO, and were analyzed using ESI-TOF and MALDI-TOF mass spectrometry. The analysis using MALDI-TOF is roughly divided into measurements on mass spectrometry. When conjugating a small molecular weight of CHX-A-DTPA and a large molecular weight of IgG, distinguishing the peak of the conjugate and the peak of IgG was difficult. However, an ESI-TOF mass spectrometer system is capable of an analysis of mass by decentralizing the IgG. It is utilized as a technique for measuring the metabolic processes during conjugation and the stability evaluation of radiopharmaceuticals. When establishing this technique, the accuracy of the overall radiophar-maceutical analysis is expected to be able to be improved.