• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1009-1014
• /
• 2001

A numerical investigation on nonlinear oscillations of gas in an axisymmetric resonant tube is presented. When a tube is oscillated at a resonant frequency, acoustic variables such as density, velocity, and pressure undergo very large perturbation, often described as nonlinear oscillation. In order to analyze these phenomena, axisymmetric 2-D nonlinear governing equations have been derived and solved numerically. Numerical simulations were accomplished for cylindrical, conical, and 1/2 cosine-shape tubes, which have same volume and length. For conical and 1/2 cosine-shape tubes, very large variation of pressures can be induced without shock formation except the cylindrical tube. In addition, the results well agree to those of 1-D simple model analysis.

• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.1-8
• /
• 2002

The counter jet flow which is injected against the free stream at stagnation region of blunt body for improvement of aerodynamic performance has been studied by using upwind Navier-Stokes method. The variations of drag force and upwind forward penetration depth due to changes in the stagnation thermodynamic properties of counter jet flow such as total pressure, Mach number, and total temperature have been studied. The results show that the changes in the stagnation pressure and Mach number have large effects on the wall pressure and drag force, but the total temperature does not affect the wall pressure and drag force.

• 산업기술연구
• /
• 제20권B호
• /
• pp.45-53
• /
• 2000

A numerical study is done on the thrust vector control using gaseous secondary injection in the rocket nozzle. A commercial code, PHOENICS, is used to simulate the rocket nozzle flow. A $45^{\circ}-15^{\circ}$ conical nozzle is adopted to do numerical experiments. The flow in a rocket nozzle is assumed a steady, compressible, viscous flow. The exhaust gas of the rocket motor is used as an injectant to control the thrust vector of rocket at the constant rate of secondary injection flow. The injection location which is on the wall of rocket is chosen as a primary numerical variable. Computational results say that if the injection position is too close to nozzle throat, the reflected shock occurs. On the other hand, the more mass flow rate of injection is needed to get enough side thrust when the injection position is moved too far from the throat.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.45-52
• /
• 2003

원추형 초음속 노즐 확산부에 이차유동이 음속으로 분출될 때 나타나는 노즐 내부 유동장에 대한 수치적 연구가 이루어졌다. 대수-난류모델과 $\kappa$-$\varepsilon$ 모델을 사용한 레이놀즈-평균 Navier-Stokes 방정식을 계산함으로서 노즐 내부에서 나타나는 충격파와 경계층의 간섭에 의한 3 차원 유동장을 해석하였다. 얻어진 수치해석의 결과는 동일한 조건에서 수행된 실험결과와 잘 일치하고 있음이 판명되었다. 이차유동의 분출압력 변화가 충격파와 경계층의 간섭과 함께 노즐내부 유동장 구조에 미치는 영향을 평가하였다. 아울러 충격파 간섭 후방에서 나타나는 와류유동 구조와 벽면 압력분포에 관한 정보를 얻었다.

• 한국추진공학회지
• /
• 제19권3호
• /
• pp.65-72
• /
• 2015

본 연구에서는 이중램제트 엔진 및 로켓/터빈 기반 복합사이클 엔진에의 활용을 위해 Mach 3에서부터 Mach 8까지 넓은 마하수 영역에서 적용이 가능한 초음속흡입구의 형상설계를 수행하고 그 설계방법론에 대해 고찰하였다. 축대칭 가변흡입구를 기본 개념으로 중심콘 각도 및 경사충격파 각도를 이용한 기하학적 관계식으로부터 흡입구 형상을 설계하였으며, 100%에 준하는 포획면적비를 갖도록 하였다. 또한 전산해석결과로부터 Mach 3~8까지 조건에서 흡입구 중심콘에서 발생한 충격파가 올바르게 배치되는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.992-995
• /
• 2011

초음속 공기 흡입식 추진시스템(램제트/스크램제트)에 적용되는 공기 흡입구의 성능설계 기법 연구를 수행하여 두 종류의 공기 흡입구에 대한 예비 형상 설계 및 성능해석 모델을 수립하였다. 제시된 모델을 사용하여 축대칭 원추형 공기 흡입구와 2차원 사각형 공기 흡입구의 압축 각도와 충격파 개수에 따른 성능 영향을 평가하였다.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.457-471
• /
• 2023

The paper evaluates the aerodynamic coefficients on a blunt-nose re-entry capsule with a conical cross-section followed by a cone-flare body. A computer code is developed to solve three-dimensional compressible inviscid equationsfor flow over a Space Recovery Experiment (SRE) configuration at different flare-cone half-angle at Mach 6 and angle of attack up to 5°, at 1° interval. The surface pressure variation is numerically integrated to obtain the aerodynamic forces and pitching moment. The numerical analysis reveals the influence of flare-cone geometry on the flow characteristics and aerodynamic coefficients. The numerical results agree with wind tunnel results. Increase of cone-flare angle from 25° to 35° results in increase of normal force slope, axial forebody drag, base drag and location of centre of pressure by 62.5%, 56.2% and 33.13%, respectively, from the basic configuration ofthe SRE of 25°.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.634-643
• /
• 2004

In this paper are presented a concept of a new supersonic air inlet, which is designated a Multi-Row Disk (MRD) inlet, aiming at performance improvement under off-design conditions, and results of wind tunnel tests examined performance characteristics of the MRD inlet. The MRD inlet is frequently called ‘a skeleton inlet’ because of its appearance. The performance of a conventional axisymmetric inlet with a solid center body (spike) deteriorates under off-design Mach number conditions. It is due to the fact that total pressure recovery (TPR) governed by the throat area of inlet and mass capture ratio (MCR) governed by an incidence position of an oblique shock from the spike tip into the cowl can not be controlled independently in such air inlet. The MRD inlet has the spike that is composed of a tip cone and several disks arranged downstream of it, based on the experimental fact that several deep cavities on a conical surface have little negative effect on the boundary layer growth. The overall spike length of the MRD inlet is adjustable to the given flight speed by changing space between disks so that a spillage flow can be controlled independently from controlling the throat area. It could be made clear from the result of wind tunnel tests that the MRD inlet improves TPR by 10% compared with a conventional inlet with a solid spike under off-design conditions.

• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.290-296
• /
• 2018

본 연구에서는 초고속 비행체 고공환경 모사시험 설비의 운용범위를 확인하기 위하여 시험모델의 형상변수에 따라 상온시험 및 수치해석을 수행하였다. 시험 모델의 형상변수로는 폐색율, 각도 및 길이 비를 고려하였다. 폐색율은 경사충격파와 팽창 팬의 영향으로 40% 이상의 영역에서 운용이 제한될 것으로 판단된다. 각도의 변수는 강한 충격파의 영향으로 45도 이하의 크기에서 모델을 선정해야함을 확인하였다. 길이의 변수는 모델직경대비 8배의 길이 변화에도 성능의 차이가 없었다. 최종적으로 원뿔형 시험 모델의 형상 변수에 따른 성능 데이터베이스를 확보하였으며, 준 자유흐름식 고공환경 모사설비의 운용 가능한 범위를 확인할 수 있었다.

• Advances in aircraft and spacecraft science
• /
• 제6권3호
• /
• pp.225-238
• /
• 2019

A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.