• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.29-30
• /
• 2020

In this study, as part of the foundation for advancing the material compounding aspect to reduce hydration heat cracks in the mat foundation on which the mass concrete is constructed, the degree of concrete varieties of cement is used. The setting time was measured and comparative analysis was performed. Results It was confirmed that the concrete using LHC was more effective than the concrete using OPC in reducing the use of SP, the calorific value of the concrete was low, and it was more effective in preventing cracks. It is also terminated after 10 hours and it is determined that the use of LHC can reduce the cracks caused by the heat of hydration of the mat foundation.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.35-41
• /
• 2012

As automation equipment and electronic device progresses, the importance of power quality is more increasing. This paper represents the analysis and suppression about the causes of trouble by the inverter's ON/OFF noise in plant in order to prevent damage resulting in a secondary damage to conduct precise diagnosis and effective noise reduction. The countermeasure as a reduced carrier frequency and the LC resonant filter had been applied and confirmed the effective results to solve the trouble of noise.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.705-711
• /
• 2012

The purpose of this study is to develop the model to estimate the penetration rate of metal under a high power continuous wave laser irradiation. To estimate it, an empirical modeling is more practical when the penetration phenomena of metal by laser irradiation is too complex to be analyzed by the numerical simulation. When several methods published earlier were applied to our results, we found out that their methods were not appropriate as the model. Therefore, we suggested the new empirical method considering effective intensity as a key variable. As a result, we confirmed that the new method was effective to model the penetration rate of SUS304 metal and expected that it could be available to other metals.

• 경영과학
• /
• 제34권1호
• /
• pp.27-45
• /
• 2017

The purpose of this study is to empirically analyze whether open innovation activities are significant and which methods are more effective in developing new businesses. Based on the latest technological innovation survey data of the Science and Technology Policy Institute, the results were analyzed by binary logistic regression analysis. As a result of the analysis, we confirmed that open innovation activities have a positive effect on the performance of developing new businesses. In the open innovation activities, Recruitment (invitation) of specialist in related fields, Business alliance technical agreement, Dispatch of personnel, M&A, Acquisitions identify related field trends showed more influence in order. It would be beneficial to improve the performance of developing new businesses with a low probability of success if utilize more effective innovation activities in developing new business in enterprises or organizations throughout this study.

• 대한통합의학회지
• /
• 제12권2호
• /
• pp.11-23
• /
• 2024

Purpose : The purpose of this study was to investigate the effect of exercise using a suspension device (sling and total body resistance exercise; TRX) on physical functional performance and postural balance. Methods : An experimental study comparing 2 different suspension exercise was conducted on 16 healthy college students. 16 subjects were assigned to two groups. They were classified into 8 sling group and 8 TRX group. Miniplus was used to evaluate physical functional performance. In this study, isokinetic resistance mode was used to compare and analyze seven movement patterns. Biorescue was used to evaluate postural balance. The intervention exercises in this study are as follows. Standing lean forward (SLF) using a sling and TRX was performed 3 times a week for 3 weeks. The SLF was held for 10 seconds and then rested for 15 seconds, repeated a total of 10 times for 3 sets. Results : In the TRX group, significant increases were observed in physical functional performance (p<.05). Among the differences between groups, significant differences were confirmed on the front of the right arm, the back of the left arm, and the back of the right arm. In the sling group, significant increases were observed in left, right, front, and overall dynamic balance (p<.05). A significant increase in posterior dynamic balance was confirmed in the TRX group (p<.05). There was no significant difference between groups. Conclusion : Based on the results of this study, TRX was effective in improving physical functional performance, while the sling was effective in enhancing postural balance. However, confirming the effectiveness of slings and TRX in the relationship between physical functional performance and postural balance proved inadequate. Therefore, additional research should be conducted to verify the effects of suspension.

• 생명과학회지
• /
• 제34권6호
• /
• pp.393-398
• /
• 2024

본 연구는 항진균성 천연물 의약품을 개발하기 위한 생물자원의 연구로서 미나리아재비과에 속한 여러 한약재의 항진균활성을 새롭게 검증하고 비교하는 것을 목표로 한다. 한약재에서 진균류 생장을 저해하는 물질을 효과적으로 추출하는 방법을 찾고 추출물들에 포함된 항진균성 유용 물질을 탐색하였다. 위령선, 황련, 백두옹 한약재의 열수 추출 및 유기용매 추출을 진행하여 액체배지에서 항진균활성을 측정하였을 때 클로로포름 분획물에서 효과적인 결과를 얻었다. 또한 단세포성 진균인 Candida albicans, Candida tropi- calis, Candida lusitaniae 그리고 사상성 곰팡이인 Pythium ultimum KACC 40705, Aspergillus fumigatus, Fusarium oxysporum을 대상으로 고체배지에서 disc diffusion 실험으로 진균 성장 저해 실험을 수행하였다. 백두옹 추출물은 Candida spp.에 대해서, 위령선은 사상성 곰팡에 대해서 우수한 항진균활성을 가지고 있다는 것으로 확인했다. 마지막으로 추출물에 존재하는 항진균성 유용물질을 탐색하기 위해 GC-MS 분석을 진행하였다. 연구 결과 미나리아재비과의 한약재에서 항진균활성을 확인할 수 있었으며 위령선에서 thur- berogenone, 황련에서 16-HCDO를 항진균성 후보물질로서 확인하였다. 결론적으로 백두옹, 위령선 및 황련은 다양한 진균류에 대하여 항진균활성을 가지고 있음을 확인하였으며, GC-MS 분석에서 세 한약재 모두 서로 다른 항진균성 후보물질을 가지고 있는 것으로 확인되었다. 이러한 결과는 미나리아재비과 생물자원이 진균류 저항성에 대해 여러 방향으로 진화되었음을 나타낸다.

• 한국가정과교육학회지
• /
• 제14권1호
• /
• pp.87-95
• /
• 2002

The purposel of this study was to examine the effects which the direct and the indirect instructions at a Home Economics class have on improving the learning achievements and attitudes. To accomplish these goals. 90 students. the number of two classes of the first tirade at p high school at Anyang city of Kyonggi province were selected. They are composed of the experimental group and the comparative group. Each group contained 40 students. The former was implemented by indirect instructions and the latter direct instructions. The 'Family and Domestic Life' unit of the first tirade was selected as the study subject to take effects and 30 periods of class were enforced. For the experimental measure of this study. the researcher used a pre-learning test. a learning attitude test. and a learning achievement test as means of measure. The two groups were confirmed as the group having the same quality, So after the experimental measure, the results of the post tests(included a learning achievement test and a learning attitude test) were verified by T-test in order to research the problematic subject. and SPSS/win statistics package was used for the processing of the statistics. The results are following: 1. The direct and the indirect instructions represented the meaningful differences in the learning achievements (p <.05). They represented the meaningful differences in improving the learning achievements of knowledge and understanding(p <.05). It was verified that the (order is more effective than the latter in improving the learning achievements of knowledge and understanding, and They represented the meaningful differences in the improving learning achievements of application (p <.05) 2. They represented the meaningful differences in the learning attitudes at a domestic class(p <.05) The latter is more effective than the former in changing into the positive learning attitudes. In the light of these result7. the direct instructions are effective in improving the learning achievements of knowledge and understanding. and the indirect instructions are effective in improving the learning achievements of application. Also the indirect instructions are more effective than the direct instructions in changing into the positive learning attitude.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.38-46
• /
• 1996

This paper discusses the feasibility of Ultrasonic Nondestructive Evaluation (UNDE) technique for sport weld quality. Ultrasonic c-scan image assisted by image processing technique was used for Nondestructive Evaluation(NDE) of spot weld quality. Ultrasonic testing results obtained were confirmed and compared by Optical Microscope and SAM(Scanning Acoustic Mircroscope) observation of the spot-weld cross section, The results show that the nugget dinameter can be successfully measured with the accuracy of 0.5mm. It was ascertained that ultrasonic c-scan technique is very effective method for the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of the corona bond from nugget. Additional support for the above conclusions is provided by the results for galvanized steel. The ultrasonic results for galvanized welds generally correspond to the results for uncoated steel. Finally, it was found that the above-mentioned technique can be sufficiently applied to NDE method for securing the Quality Assurance(QA) of spot welded products in production line.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.756-765
• /
• 2022

The purchase-related responses of MZ generation consumers may vary depending on the environmental factors of the fitting room. Therefore, this study extracted and systematized fitting room characteristics in the retail fashion environment. In-depth interviews were conducted with a total of 50 informants to collect data on the experience of using the fitting room. Then, a qualitative analysis was performed. First, results confirmed that the environmental factors of the fitting room include physical (spatiality, functionality, comfort, and convenience) and human (interactivity and congestion) aspects. Next, additional analysis was performed on functionality and interactivity to clarify the influence of environmental characteristics of the fitting room. These factors were classified into qualitative categories. The study results confirmed that, in the case of functionality, preferred lighting and mirror factors vary depending on the clothing product type, the place and situation for wearing, and individual characteristics. Furthermore, regarding interactivity, the preference for the presence of sales staff or companions differed according to personal traits and the need for additional information and evaluation. The study provides valuable information for effective fitting room space planning for offline fashion stores to meet the needs of MZ generation consumers.

• 한국통신학회논문지
• /
• 제15권9호
• /
• pp.785-795
• /
• 1990

임의의 반경을 갖는 원통의 내곡면 및 외곡면 표면에 밀착하여 호형(弧形, arc array)으로 배열된 마이크로스트립 어레이 안테나의 원거리 복사패턴에 관하여 Fourier Transform을 이용하는 근사법을 제시한다. 실효개구면을 호의 끝점을 잇는 평면으로 정의하면, 곡면 안테나는 실효개구면 평면위에 위상이 다른 비주기 배열로 근사화될 수 있음을 보였으며, 평면형에 대하여 표준화된 실효개구면비가 1.0-0.9인 범위에서 근사법에 의한 해석이 타당함을 확인하였다. 실효개구면 배열에서 위상 변화는 곡면과 개구면 사이의 비선형적 경로차에 기인하는 것으로 해석하였으며, 특히 곡률 반경이 호의 길이보다 5배 이상일 때는 Fourier Transform Method에서 scale factor의 변화만으로 해석이 가능하였다. 근사법에 의한 계산 결과는 -40dB의 측정범위에서 좌표변화법 및 실험결과와 잘 일치하였으며, 근사법과 좌표변환법에 의한 계산에서 반전력각(half power angle)의 차이는 실효개구면비가 0.9이상에서 5'미만이었다.