• Title/Summary/Keyword: Confirmed the effective results

검색결과 1,818건 처리시간 0.04초

복부 방사선치료를 받는 환자에서 발생하는 오심 및 구토에 대한 온단세트론과 메토클로프라미드의 효과 : 제 3상 전향적 무작위 비교임상시험 (A Prospective Randomized Comparative Clinical Trial Comparing the Efficacy between Ondansetron and Metoclopramide for Prevention of Nausea and Vomiting in Patients Undergoing Fractionated Radiotherapy to the Abdominal Region)

  • 박희철;서창옥;성진실;조재호;임지훈;박원;송재석;김귀언
    • Radiation Oncology Journal
    • /
    • 제19권2호
    • /
    • pp.127-135
    • /
    • 2001
  • 목적 : 본 연구는 중등도 정도의 오심 및 구토의 발생 위험도를 가지는 복부 방사선치료를 받는 환자들을 대상으로 오심 및 구토에 대한 항구토제의 효과와 부작용 여부를 비교하는 전향적 무작위 임상연구로, 예방 목적으로 항구토제를 사용할 때 현재 통상적으로 많이 처방되는 항구토제인 메토클로프라미드(metoclopramide)에 비하여 온단세트론(Ondansetron; $Zofran^{\circledR}$)을 사용하는 것이 더 나은 효과를 가져오는지 알아보고자 하였다. 대상 및 방법 : 대상 환자의 포함 기준은 병리학적으로 암으로 확진되고 전이성 원인이 아닌 원발 부위에 치료를 받는 환자, 신체수행도가 ECOG 기준으로 2기 이하인 환자, 항암 화학요법이나 방사선치료를 받은 과거력이 없는 환자로 하였다. 1997년 3월부터 1998년 2월까지 총 60명의 환자가 덜 연구에 참여하였다. 내원한 순서에 따라 미리준비된 난수표에 의하여 각각 온단세트론 투약군(O군)과 메토클로프라미드 투약군(M 군)으로 할당하였다. O군의 온단세트론 용량은 8 mg, bid 로 하였고, M군의 메토클로프라미드 용량은 5 mg, tid 로 하였다. 평가 항목은 오심의 정도, 구토 회수, 식욕감소의 정도로 하였다. 환자에게 일일 기록카드를 교부하여 환자의 주관적인 증상인 오심의 정도, 구토의 횟수, 식욕감소의 정도를 기록하도록 하였다. 치료기간을 일주일 간격으로 나누어 각 주별 오심 및 식욕감소의 정도, 평균 구토횟수를 구하였다. 결과 : 본 연구에 참여한 60명의 대상 환자 중 55명의 환자에서 분석이 가능하였다. M군은 28명, O군은 27명이었다. 환자 특성 및 방사선치료에 관한 특성은 연령을 제외하면 차이가 없었다. 연령은 M 군이 $52.9{\pm}11.2$세, O군이 $46.5{\pm}9.6$세로 통계적으로 의미 있는 차이가 있었다. M군에 비해 O군에서 오심의 정도, 구토의 횟수, 식욕감소의 정도의 세 항목 모두 낮은 점수 분포를 보였다. M군의 경우 방사선치료를 시작한 후 5주째 각 항목별 점수가 가장 높은 경향을 보였다. 혼합모형을 이용한 반복측정 자료의 분석 결과 오심의 정도에는 원발암의 종류, 투약군이 의미 있게 영향을 미치는 요소였다. 구토의 횟수에는 성별, 연령, 총선량, 투약군이 의미 있게 영향을 미치는 요소였다. 식욕감소의 정도에는 연령, 투약군이 의미 있게 영향을 미치는 요소였다. 따라서, 투약군이 유일하게 세 가지 항목 모두에 통계적으로 의미 있는 영향을 미치는 요소임을 알 수 있었다. 전 치료기간 동안 양 투약군 모두 약제의 투여로 인한 부작용은 없었으며, 일반혈액검사 및 일반화학검사에서도 이상 소견을 보이지 않았다. 결론 : 연령이 적으면 오심 및 구토의 위험도가 증가하는 점을 고려하면, 양 투약군 간에 연령의 차이가 있었던 점이 통계적 변별력을 저하시켰을 가능성이 있다. 상기 결과를 토대로 본 연구자들은 중등도 정도의 오심 및 구토의 발생 위험도를 가지는 상복부 및 전복부조사를 전통적인 분할조사법을 이용하여 치료하는 경우 현재 흔히 사용되는 항구토제인 메토클로프라미드에 비해 온단세트론이 오심 및 구토, 식욕의 저하 등의 급성 부작용을 더 효과적으로 억제함을 알 수 있었다. 하지만, 온단세트론을 투여하는 경우에도 오심 및 구토가 호전되지 않는 경우도 많이 있으므로 이 부작용을 더욱 경감하기 위한 여러 가지 방안들이 강구되어야 한다고 생각된다.

  • PDF

초유폭약류(硝油爆藥類)를 활용(活用)한 단일자유면발파(單一自由面發破)의 역학적(力學的) 연구(硏究) (Dynamical Study on the Blasting with One-Free-Face to Utilize AN-FO Explosives)

  • 허전
    • 자원환경지질
    • /
    • 제5권4호
    • /
    • pp.187-209
    • /
    • 1972
  • 발파(發破)에 있어서 천공배치(穿孔配置)는 발파효과에 영향(影響)을 미치는 가장 중요(重要)한 요소중(要素中)의 하나다. Burn-cut 의 폭발(爆發)의 여러 요소(要素)에 관(關)한 연구(硏究)는 Brown, Cook에 의(依)해 발표(發表)된 바 있으나 본연구(本硏究)에 있어서는 Burn-cut 와 Pyramid-cut의 천공배치(穿孔配置)의 대비(對比)와 폭원(爆源)과 자유면(自由面)사이의 역학적(力學的) 응력해석(應力解析)에 중점(重點)을 두어 이등교수(伊藤敎授)가 전개(展開)한 이론(理論)에서 다루지 않은 주정천공배치(週正穿孔配置)에 의(依)한 Burn-cut의 효과을 연결(連結)시켰다. 종래(從來)의 이론(理論)에 의(衣)하면 단일자유면발파(單一自由面發破)에 있어서는 압축응력외(壓縮應力外)에 자유면(自由面)에서 반사(反射)되는 인장응력(引張應力)의 영향(影響)을 추가(追加)로 받는다. 본(本) 신천공(新穿孔) 배치(配置)에 의(依)한 Burn-cut는 자유면수(自由面數)의 증가(增加)와 거리(距離)의 축소(縮少)를 꾀하므로서 이효과(效果)는 더욱 증대(增大)된다. 이와 같은 효과를 위(爲)해서는 다음 두가지 점(點)을 고려해야 한다. 첫째 심기공(心技孔)의 무장약공(無裝藥孔)은 보조응력(補助應力)을 크게 하기위(爲)해 가능(可能)한 대구경(大口徑)으로 깊게 천공(穿孔)해야 한다. 둘째 각 심기공간(心技孔間)의 거리(距離)를 접근(接近)시켜 완전(完全) 발파(發破)를 기(期)해야 한다. 그 까닭은 구경(口徑)이 증가(增加)됨에 따라 2차(次) 자유면(自由面)은 넓어지고 거리가 가까울수록 장약공(裝藥孔)과 무장약공(無裝藥孔)사이의 인장응력(引張應力)은 더욱 발달(發達)되기 때문이다. 선진국(先進國)에서는 심기공(心技孔)사이의 거리(距離)를 4"로 함이 이상적(理想的)이라고 알려지고 있으나 본실험(本實驗)에 의(依)하면 더 욱 근접(近接)될수록 파괴암석(破壞岩石)이 증가(增加)되고 굴진장(掘進長)도 깊어짐이 밝혀졌다. 나아가서는 굴진장(掘進長)을 더욱 증대(增大)시키기 위(爲)해 Burn-cut로 부터 Large hole Burn-cut를 개발(開發)하여 발파회수(發破回數) max 7회(回)/일(日)로서 1발파당(發破當) 3.1m까지 시도(試圖)함으로서 고속도굴진(高速度掘進)의 기원(起源)을 마련했다. 또한 대구경(大口徑) Burn-cut에서는 큰 저항(抵抗)을 극복하기 위해 금속초유폭약(金屬硝油爆藥)을 사용(使用)함이 더욱 효과적(效果的)임이 입증(立證)됐다. 최근(最近)에 와서 저렴(低廉)한 가격(價格)과 취급안전(取扱安全)으르 각광을 받고있는 AN-FO는 비료용 또는 공업용(工業用) 초안(硝安)에 연료유(燃料油)를 혼합(混合)한 것으로서 외관(雷管)만으로는 순감(純感)하여 폭발(爆發)하지 않으나 Gelatin Dynamite등(等)의 폭발성(爆發性) 예감제(銳感劑)에 의(依)해 발파공내(發破孔內)에서 일단 기폭(起爆)되면 종래(從來)의 초안폭약(硝安爆藥)에 상당(相當)한 위력(威力)을 발휘(發揮)케 한다. AN-FO 폭제(爆劑)의 성능(性能)에 관(關)해서는 많은 보고(報告)가 있었으나 본(本) 실험(實驗)에 의(依)하면 초유혼합비(硝油混合比)는 분상(粉狀)은 93.5:6.5, prill상(狀)은 94:6이 최적(最適)이며 분상(粉狀) AN-FO는 prill상(狀) AN-FO보다 항상(恒常) 폭속(爆速)이 높다. 또한 기폭감도(起爆感度), 충격감도(衝擊感度), 진거감도(塵據感度) 등(等) 제감도(諸感度)는 타화약(他火藥)에 비(比)해 몹시 경감(鏡感)하며 전폭성(傳爆性)은 prill상(狀)이 분상(粉狀)보다 우수(優秀)함을 얻었다. 발파후(發破後) Gas도 양호(良好)하며 AN-FO는 제조후(製造後) 7일(日) 전후(前後)가 최대효과를 갖는다. 종래(從來) AN-FO는 지난 여러해 동안 로천굴(露天掘)에만 사용(使用)하여 왔으나 필자(筆者)는 AN-FO의 기초성능시험(基礎性能試驗)을 토대(土臺)로 이를 이용(利用)한 신종폭제(新種爆劑)로서 금속초유폭약(金屬硝油爆藥)과 수중폭약(水中爆藥)을 발전(發展)시켰다. 금속초유(金屬硝油)의 폭약(爆藥)은 AN-FO와 Al 금속분말의 혼합물(混合物)이며 수중폭약(水中爆藥)은 종래폭약(從來爆藥)과 AN-FO로 제조(製造)한 바 이에 관(關)해서는 다른 논문(論文)에 기술(記述)했다. 본(本) 연구(硏究)에 있어서는 단일자유면(單一自由面) 발파(發破)에 있어서 격유폭약류(隔油爆藥類)를 사용(使用)한바 그 효과(效果)가 매우 양호(良好)하였음을 확인(確認)하였다.

  • PDF

비인두암의 국소 종양 치유와 생존율에 관한 예후 인자 분석 (An Analysis on Factors Affecting Local Control and Survival in Nasopharvngeal Carcinoma)

  • 정웅기;조재식;박승진;이재홍;안성자;남택근;최 찬;노영희;나병식
    • Radiation Oncology Journal
    • /
    • 제17권2호
    • /
    • pp.91-99
    • /
    • 1999
  • 목적 :비인두암 환자에서 항암화학요법과 방사선치료 후 국소종양제어율, 생졸율, 무병생존율에 미치는 예후 인자를 알아보고자 하였다. 대상 및 방법 : 1986년 7월부터 1996년 6월까지 약 10년간 전남대학교병원에서 비인두암으로 확진되어 근치적 목적으로 치료를 받은 47명의 환자를 대상으로 후향적 분석을 시행하였다. 대상 환자의 연령 분포는 16세에서 80세까지였고 중앙값은 52세였다. 성별 분포는 남자가 33명(70$\%$), 여자가 14명(30$\%$)이었다. WHO의 기준에 의한 조직학적 유형은 제1형(제라틴형성 편평세포암)이 3례(6$\%$), 제2형(비케라틴형성 편평세포암)이 30례(64$\%$), 제3형(미분화암)이 13례(28$\%$)였고 나머지 1례(2$\%$)는 조직학적 유형이 알려지지 않았다. 미국암합동위원회(1997)의 병기분류법에 따라 후향적으로 다시 분류한 병기는 71, T2a, T2b, 73, 74에서 각각 11례(23$\%$), 6례(13$\%$), 9례(19$\%$), 7례(15$\%$), 14례(30$\%$)였다. 그리고 림프절 침범 상태는 NO, Nl, N2, N3에서 각각 7례(15$\%$), 14례(30$\%$), 21례(45$\%$), 5례(l0$\%$,) 있었다. 병기군별 분포는 Stage 1, IIA, IIB, III, IVA, IVB에서 각각 2례(4$\%$), 2례(4$\%$), 10례(21$\%$), 14례(30$\%$), 14례(30$\%$), 5례(11$\%$) 있었다. 방사선치료 전에 항암제 치료를 받은 환자는 42례이며 5례는 항암제 치료가 시행되지 않았다. 방사선치료는 선형가속기의 6MV와 10MV X-ray 및 9MeV 전자선을 사용하였으며 원발 병소에 조사된 총방사선량은 6120-7920cGy(중앙값 : 7020cGy)였다. 항암화학요법 은 Cisplatin+5-Fluorouracii(25명), Cispiatin+pepleomycin(17명)으로 1회에서 3회까지 시행하였다. 국소종양제어율, 생졸율, 무병생존율을 Haplan-Meier법에 의하여 산출하였으며 두 군간의 생존율의 차이는 GeneraliBed t띤cokon test를 이용하여 검증하였다. 영향을 주는 인자의 다변량분석에는 Cox 모델을 이용하였다. 결과 : 국소종양 제어율은 2년에 89$\%$, 5년에 81$\%$이었다. 5년 생존율을 60$\%$,(범위: 6-132개월, 중앙값: 106개월)이었다. 예후에 영향을 미치는 위험 일자로 연렬, 성별, 뇌신경침범, 병리조직학적 유형, 병기군, 항암화학요법, 항암화학 요법과 방사선치료 사리의 간격, 방사선량, 방사선치료기간을 다변량분석에 포함시켰다. 국소종양제어율에는 뇌신경침범(P=0.004)만이 의의 있는 것으로 나타났다. 생존율과 무병생존율에는 병기군(P=0.006, P=0.006)과 총방사선량 (P=0.012, P=0.008)이 의의 있는 것으로 나타났다. 치료 후 합병증은 구강건조증, 치아손상, 이증상 등이 많았으며 2례의 갑상선기능저하증이 있었다. 결론 : 비인두암에서 예후에 영향을 미치는 인자로서 국소종양제어율은 뇌신경침범 여부가, 생존율 및 무병생존율에는 총방사선량과 병기군, 특히 N 병기가 의의 있는 것을 알 수 있었다. 사용된 항암화학요법과 방사선치료는 심각한 부작용이 없이 효과적으로 이용될 수 있음을 알 수 있었다.

  • PDF

직장암의 수술 전 동시적 항암화학방사선치료 결과 (Results of Preoperative Concurrent Chemoradiotherapy for the Treatment of Rectal Cancer)

  • 윤미선;남택근;김형록;나병식;정웅기;김영진;안성자;송주영;정재욱
    • Radiation Oncology Journal
    • /
    • 제26권4호
    • /
    • pp.247-256
    • /
    • 2008
  • 목 적: 직장암에서 수술 전 동시적 항암화학방사선요법을 시행한 환자를 대상으로 항문 괄약근 보존율, 생존율, 예후인자 등을 알아보고자 하였다. 대상 및 방법: 1999년 1월부터 2007년 6월까지 직장암 환자로 진단되어 수술 전 동시적 항암화학방사선요법을 시행한 환자는 모두 150명이었다. 이 중 진단시 원격전이가 없고 재발암이 아니며 본원에서 근치적 수술을 받은 환자 중 계획된 방사선치료를 완료한 총 82명의 환자를 대상으로 하였다 방사선치료는 일일 $1.8{\sim}2\;Gy$씩, 주 5회 $41.4{\sim}46\;Gy$ (중앙값 44 Gy)를 전 골반에 조사한 후 원발부위 및 고위험 부위에 총 방사선량이 $43.2\;Gy{\sim}54\;Gy$(중앙값 50.4 Gy)까지 추가 조사하였다. 항암화학요법은 66명(80.5%)에서 5-fluorouracil (5-FU), leucovorin, cisplatin을 정주하였고, 15명(19.5%)에서는 5-FU와 leucovorin만을 정주하여 방사선치료 기간 동안 4주 간격으로 2회 시행되었다. 수술은 동시적 항암화학방사선치료 종료 후 $3{\sim}45$주(중앙값 7주)가 경과되어 시행되었다. 수술 후 유지 항암화학요법은 총 38명(47.6%)에서 시행되었다. 결 과: 전체 환자의 항문 괄약근 보존율은 73.2%(60명)이었다. 이 중 종양의 최하 위치가 항문연으로부터 5 cm 미만인 환자 48명중 31명(64.6%)에서, 5 cm 이상인 환자 34명 중 29명(85.3%)에서 항문 괄약근을 보존할 수 있었다. 수술 후 병리적 완전관해율은 14.6% (12/82)였다. 전체 환자의 T병기 하강률은 42.7% (35/82)였고, N병기 하강률은 75.5% (37/49)였으며, 전체 병기 감소율은 67.1% (55/82)였다. 전체 환자의 추적 관찰 기간은 $11{\sim}107$ 개월로 중앙값은 38개월이었다. 전체 환자의 5년 생존율, 무병생존율 및 국소종용제어율은 각각 67.4%, 58.9%, 84.4%였다. 수술 후 병기별 5년 생존율은 0 (n=12), I (n=16), II (n=30), III (n=23)기에서 각각 100%, 59.1%, 78.6%, 36.9%이었고 IV 병기 1예는 43개월 현재 생존 중이다(p=0.02). 병기별 5년 무병생존율은 0, I, II, III, IV 기에서 각각 77.8%, 63.6%, 58.9%, 51.1%, 0%였다(p<0.001). 병기별 5년 국소종양제어율은 0, I, II, III기 에서 각각 88.9%, 93.8%, 91.1%, 68.2%였고 IV병기 1예는 43개월 현재 국소재발 없이 생존 중이다(p=0.01). 생존율에 영향을 미치는 예후인자를 분석하기 위하여 연령(${\geq}55$세 VS. >55세), 임상적 병기(I+II vs, III), 방사선치료 종료 후 수술까지의 경과기간(${\leq}6$주 vs. >6주), 수술방법 (항문괄약근보존술 vs. 비보존술), 병리학적 T병기, 병리학적 N 병기, 병리학적 전체병기(0 vs. I+II vs. III+IV), 병리학적 완전관해여부 등 총 8개의 다변량 분석상, 연령과 병리학적 N병기는 전체 생존율에, 병리학적 전체 병기는 무병생존율에, 병리학적 N병기는 국소종양제어율에 각각 유의하였다. 전체 환자 중 재발한 환자는 모두 25명으로 국소재발 10명, 원격전이 13명, 국소 및 원격전이가 동시에 있던 환자 2명이었다 항암화학 방사선치료 중 등급 3 이상의 혈액학적 독성은 백혈구 감소가 2명이었고, 등급 3의 피부반응이 1명이었다. 수술 후 60일 이내의 입원을 요할 정도의 합병증으로는 총 11명으로 문합부 누출 5명, 골반부 농양이 2명, 그외 4명 등이었다. 결 론: 직장암에서 수술 전 동시적 항암화학방사선요법으로 병기 하강 및 항문 괄약근 보존에 유용한 결과를 얻었고, 수술 전 항암화학방사선요법으로 인한 독성은 미미하였다. 병리학적 N병기가 생존율과 국소종양제어율에 유의한 예후 인자로 나타나 이들에 대한 수술 후 보조적 요법이 더욱 강화될 필요가 있다고 생각된다.

고등학생을 위한 가정교과 기반 예비부모교육 프로그램 개발 및 평가 (Development and evaluation of Pre-Parenthood Education Program for high school students based on Home Economics subject)

  • 노희연;조재순;채정현
    • 한국가정과교육학회지
    • /
    • 제29권4호
    • /
    • pp.161-193
    • /
    • 2017
  • 본 연구의 목적은 고등학교 교육과정에서 활용할 수 있는 가정교과 기반의 예비부모교육 프로그램을 개발하고 평가하여, 예비부모인 고등학생 학습자들이 훗날 우리 사회의 주역이 될 미래세대를 현명하게 보살필 수 있는 성숙한 부모가 되는데 필요한 역량을 갖추도록 하며 동시에 현재 정부가 추진하고 있는 부모교육 활성화 방안의 청소년 대상 예비부모교육을 실행하는 데 도움이 되는 기초자료를 제공하는데 있다. 본 연구의 예비부모교육프로그램 개발 및 평가 과정은 일반적체제설계모형인 ADDIE 모형을 따랐으며, ADDIE모형 중 실행단계(Implement)를 제외한 분석, 설계, 개발, 평가의 4가지 과정을 거쳐 이루어졌다. 먼저, 분석 단계에서는 프로그램 내용요소 추출과 프로그램 개발의 시사점을 얻기 위해 관련 선행연구와 2015 개정 중 고등학교 "기술 가정" 교육과정 문서를 대상으로 분석이 이루어졌다. 그 결과 가정교과 이 외의 분야에서 연구되어 온 예비부모교육의 9 가지 주제(1.자기이해, 2.예비부모의 성, 3.결혼, 4.임신과 출산, 5.부모됨, 6.부모역할, 7.부모 자녀관계, 8.부모와 가족, 9.부모와 사회)와 해당 내용요소들은 이미 가정교과 교육과정에 모두 포함되어 있음을 확인하였으며, 9가지 주제 이외에 가정교과만의 독자적인 주제(1.생애설계, 2.가정생활 내 의 식 주 실천역량, 3.가정생활과 자녀안전, 4.가족문화)와 해당 내용요소들을 별도로 확인함으로써 예비부모교육 시행에 있어 가정교과가 지닌 강점(청소년과 가정과 사회를 바라보며 부모교육 내용 뿐만 아니라 식 의 주 소비 생활 전반을 포함하는 총체적 관점의 교육과 실제로 부모 준비를 실천하게 하는 교육)을 확인하였다. 둘째, 프로그램 개발을 위한 설계는 가정교과와 예비부모교육 간의 접점을 찾고 이를 프로그램 구성요소(목적, 개발방향, 주제, 내용요소, 학습목표, 학습활동)에 반영하는 과정을 통해 이루어졌다. 이 연구의 예비부모교육 프로그램은 미래세대를 현명하게 길러낼 수 있는 성숙한 부모가 지녀야 할 관련 지식, 태도, 가치관, 실천적 문제 해결 능력을 고등학생 학습자가 갖추도록 지원하는 것을 일차 목적으로 두며, 부모됨의 준비 관점에서 학습자가 현재 생활 점검 및 개선을 통해 생활자립능력을 갖추도록 하는 것을 이차목적으로 둔다. 궁극적으로 이 두 가지 목적 달성을 통해 학습자가 장차 부모로서 살아갈 가정생활 영역과 개인적 성취와 관련된 직업생활 영역 그리고 사회 발전에 기여할 수 있는 민주시민으로서의 삶의 영역간의 균형을 이뤄 이를 조화롭게 영위할 수 있는 성숙한 부모로의 성장을 돕고자 하였다. 프로그램 개발방향은 '전체 전개', '내용구성', '교수 학습법 구성'으로 크게 세 가지 측면에서 설정되었다. 프로그램의 주제는 총 11개로 '1. 부모 됨: 부모가 된다는 건', '2. 배우자선택: 행복한 부부관계, 자녀에게 주는 최고의 선물', '3. 임신과 출산: 새로운 생명과의 감동적인 만남', '4. 신생아 돌봄: 24시간 신생아 돌봄', '5. 영유아자녀돌봅: 사랑스러운 나의 아기와의 관계, 애착', '6. 유아기 자녀 돌봄: 별에서 온 내 아이, 유아기 자녀 돌보기', '7. 부모와 건강가정: 건강가정 속 부모와 자녀', '8.부모 자녀 관계: 현명한 부모, 자녀와 효과적으로 상호작용하기', '9. 가정생활 내 자녀안전: 가정생활 속 안전관리자, 부모', '10. 영유아 돌봄 실습', '11. 지역사회 양육지원서비스 개발 실습'이다. 프로그램의 들어갈 최종 내용요소들은 분석단계에서 추출된 내용요소들을 11개 주제와의 관련성을 토대로 분배된 후 선정되었다. 학습목표와 학습활동은 해당 주제와 내용요소를 반영하여 구상되었으며, 특히 프로그램의 학습활동은 1) 부모 됨 관련 실천적 문제를 포함한 사례 활용, 2) 학습한 지식과 기술을 활용한 지역사회 교류활동, 3) 부모 됨 관련 학습내용을 활용한 실생활 프로젝트 활동, 4) 고등학생 학습자의 현재 삶의 긍정적인 변화를 유도하는 활동, 그리고 5) 자녀 발달을 지원하는 가정교과 내 의 식 주 실습활동을 주요 특징으로 한다. 셋째, 프로그램의 개발은 앞서 설정된 설계에 따라 이루어졌으며, 이에 총 11개 주제에 따른 17차시 분량에 해당하는 교수 학습과 정안 및 학습자료가 개발되었다. 개발된 교수 학습과정안은 수업흐름 및 교사 참고자료를 포함하며, 수업 도입부에 가상의 자녀로부터 수업관련 메시지를 받는 것을 시작으로, 정리단계에서는 받은 메시지에 대한 답장의 형태로 해당 차시의 내용 정리 및 예비부모로서의 다짐을 하는 것을 기본 틀로 하였다. 학습자료는 학습활동을 위해 필요한 각종 계획서나 보고서 양식을 포함하며, 정규교육과정에서의 교과서와 같은 역할을 하도록 구체적으로 작성되었다. 넷째, 개발된 프로그램의 평가는 프로그램 개발과정과 결과물 두 가지 측면에 대해 가정교과 전문가 13인으로부터 5점 리커트형 설문지를 활용하여 이루어졌다. 개발과정에 대한 기초분석 평가결과 평균 4.61점, 내용타당도 지수 97.4%였으며, 프로그램 결과물에 대한 평가결과는 평균 4.37점 내용타당도 지수 86.9%였다. 이와 같은 값은 이 연구 프로그램의 개발과정과 그 결과물에 대한 타당도가 상당히 높은 수준에서 확보됐음을 나타내며, 이에 이 연구의 가정교과 기반의 예비부모교육 프로그램은 고등학생 학습자를 대상으로 하는 예비 부모 교육 프로그램으로 타당하고 적합하다는 결론을 내릴 수 있다.

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

공공 정보지원 인프라 활용한 제조 중소기업의 특징과 성과에 관한 연구 (The Characteristics and Performances of Manufacturing SMEs that Utilize Public Information Support Infrastructure)

  • 김근환;권태훈;전승표
    • 지능정보연구
    • /
    • 제25권4호
    • /
    • pp.1-33
    • /
    • 2019
  • 제조 중소기업들은 지속적인 성장과 생존을 위해 새로운 제품 개발에 필요한 많은 정보가 필요할 뿐만 아니라 자원의 한계를 극복하기 위한 네트워킹(networking)을 추구하지만, 규모의 한계로 인해 한계점에 봉착하게 된다. 초연결성으로 인해 비즈니스 환경의 복잡성과 불확실성이 더욱 높아지는 새로운 시대에 중소기업은 신속한 정보 확보와 네트워킹 문제를 해결이 더욱 절실해지고 있다. 이러한 문제를 해결하기 위해 공공기관인 정부출연(연)구기관(이하 '출연(연)')은 중소기업의 정보 비대칭성 문제를 해결해야하는 중요한 임무와 역할을 맞이하고 있다. 본 연구에서는 비즈니스 인텔리젼스의 경쟁 지능화(competitive intelligence) 기능과 외부 네트워크 활성화를 위한 서비스 인프라(service infrastructure)의 기능을 포함한 공공 정보지원 인프라를 통한 간접지원의 성과를 확산하고자 하는 목적으로 출연(연)이 중소기업의 혁신역량 제고를 위해 제공하는 공공 정보지원 인프라를 활용하는 중소기업의 차별적 특징을 파악하고, 인프라가 기업의 성과에 어떻게 기여하는 가를 규명하고자 하였다. 이를 위해 첫째, 출연(연)이 제공한 정보지원 인프라를 활용하는 제조 중소기업은 다른 중소기업과 어떤 차별적인 특정이 있는가? 라는 연구 질의를 도출하였다. 추가적으로 단순히 선택적 편의 여부를 판단하는 것을 넘어서 출연(연) 정보지원 인프라를 활용한 제조 중소기업의 특징을 복수 집단의 특징과 비교하는 연구를 진행하였다. 둘째, 출연(연)이 제공하는 정보지원 인프라를 활용한 제조 중소기업의 외부 네트워킹 역량이 제품 경쟁력에 어떻게 기여했는가? 라는 연구 질의이다. 본 연구에서 공공 정보지원 인프라에 의해서 강화된 외부 네트워킹 역량이 어떻게 제품 경쟁력에 영향을 미쳤는지 정밀하게 분석하기 위해 복수의 변수에 대한 매개 및 조절 효과 분석을 수행하였다. 연구 모형을 도출하기하기 위해 첫째, 외부 네트워킹이 기술혁신성과에 영향력에 대한 평가를 수행하였다. 일반적으로 기업들은 외부 네트워킹(networking) 전략을 통해 혁신에 필요한 가치 있는 정보를 획득할 수 있기 때문에 기술혁신성과를 높일 수 있다. 정보 획득은 중소 제조기업 경영자의 혁신에 대한 인식을 강화할 뿐만아니라, 의사결정을 효율적으로 하여 경쟁력을 강화시킬 수 있게 된다. 대기업에 비해 인력과 자금의 규모 한계를 극복하기 위해 중소기업은 외부 조직과의 협력관계를 보다 적극적으로 추구한다. 둘째, 기술사업화 역량이 기술혁신성과에 미치는 관계에 대한 평가를 수행하였다. 기술사업화는 생산과 마케팅을 통합하여 새로운 기술을 만드는 역량을 말한다. 우수한 생산 역량을 보유한 기업은 소비자의 수요를 가격, 품질, 신기능 측면에서 신속하게 충족시킬 수 있어 시장내 경쟁우위를 창출하고, 그 결과로 높은 재무적 혁신적 성과를 가져온다고 본다. 혁신적인 기업은 생산 역량과 마케팅 역량에서 일반 기업보다 높은 성과를 나타내는데, 기술혁신성과의 대표 지표로 제품 경쟁력을 지목하고 있다. 마지막으로 기업의 규모가 작을수록 새로운 혁신 정보를 확보할 수 있는 자체 정보지원 인프라가 없는 경향이 있다. 중소기업용 정보인프라는 기업의 제품 또는 서비스 역량을 강화하기 위한 전략에 필요한 중요한 정보를 확보할 수 있어야 하며, 데이터에 대한 해석 기능이 있어야 하고, 기업의 성장과 발전을 위한 다양한 주제(대기업, 공급자, 소비자 등)와의 협력 전략을 수립을 도울 수 있는 기능이 요구된다. 종합하면, 연구모형은 외부 네트워킹 역량(독립변수)이 기술혁신성과인 제품 경쟁력(종속변수)에 영향을 주는 기본 모형에 기술사업화 역량을 매개요인으로 적용하였고, 이들의 관계에 기업의 내부역량(연구원 집중도, 매출액, 업력)이 영향을 줄 수 있기 때문에 기업의 내부역량과 관련된 변수들을 통제하였다. 또한 KISTI가 제공한 공공 정보지원 인프라 활용한 기업별 역량 차이를 분석하기 위해, 정보지원 인프라 활용(효율성)과 관련된 KISTI 외부 기술사업화 전문가(멘토링) 정보지원 횟수의 조절 변수로 고려하였다. 본 연구에서 활용한 데이터 원천은 2차 정보인 '제8차 중소기업 기술통계조사' 자료와 1차 정보인 KISTI의 직접 설문 자료다. '제8차 중소기업 기술통계조사' 는 중소기업청과 중소기업중앙회에서 공동으로 매년 실시되고 있으며, 설문 조사의 모집단은 종사자수 5인 이상 300인 미만인 제조업 및 제조업 외 기업 중에서 기술개발을 수행하고 있는 중소기업 43,204개사이다. 이 중에서 2014년 12월 31일 현재 기준으로 기술개발을 수행하고 있는 3,300개 중소기업을 표본추출하여 방문조사를 실시하여 수집한 자료이다. 본 연구에서 KISTI의 정보지원 인프라를 통해 지원받은 290개의 KISTI 패밀리 기업(ASTI)을 대상으로 2017년에 전자 메일을 통해 자료를 수집하였다. 송부된 290개의 설문지 중 222개의 기업에서 회신을 보내왔으며 그 중에서 설문 내용이 유효한 설문 조사는 149건으로 활용율은 51.3%였다. 분석 결과에 대한 살펴보면 다음과 같다. 규모면에서는 공공 정보지원 인프라 활용 제조 중소기업(ASTI 설문 집단)과 R&D 중소기업(KBIZ 설문 집단)의 성향은 통계적으로 유의미하게 차이가 있었지만, 보다 많은 변수를 종합적으로 보면 크게 다르지 않은 집단이라고 판단했다. 공공 정보지원 인프라를 활용하는 제조 중소기업은 이미 출연(연)과 협업이 가능한 집단을 대표하는 성향 보이는 것으로 나타났다. 외부 네트워킹 역량 강화가 제품 경쟁력 제고에 기여하는데 있어서 기술사업화 역량(마케팅 및 생산 역량)이 가지는 매개 효과의 가능성을 탐색하기 위해서 먼저 통제 변수는 고려하지 않고, Baron과 Kenny(1986)의 매개 효과 분석을 수행했다. 분석결과 외부 네트워크 역량 강화 효과가 제품 경쟁력을 강화시키는 것으로 보였지만, 실제는 기술사업화 역량의 제고를 통해 제품 경쟁력을 강화시키는 것으로 나타났다. 공공 정보지원 인프라 활용의 효과성을 판단하기 위한 멘토링 정보지원 횟수의 조절효과 분석을 위해 3단계의 위계적 회귀분석을 수행하였다. 분석 결과 외부 네트워킹 역량과 멘토링 정보지원 횟수의 상호작용항이 혁신성과(제품 경쟁력)에 유의한 영향을 미쳤을 뿐 아니라, 모델의 설명력도 증가하여, 멘토링 정보지원 횟수의 조절 효과가 검증되었다. 마지막으로 앞서 확인된 복수 매개효과와 조절효과가 동시에 나타날 수 있는 가능성을 판단하기 위해서 매개된 조절효과를 검토했다. 분석결과 외부 네트워킹 역량이 높아지면 제품 경쟁력 제고에 양의 영향을 주지만, 조절 변수인 멘토링 지원 횟수가 높아질수록 그 영향은 오히려 약화되었다. 그리고 외부 네트워킹 역량이 높아지면 사업화 역량(마케팅과 생산)이 높아져서 제품 경쟁력이 높아지며, 조절변수인 멘토링 지원 횟수가 높아지면 독립변수 외부 네트워킹 역량이 매개변수 생산 역량에 미치는 역량이 작아졌다. 종합하면, 외부 네트워킹 역량의 제고는 제품 경쟁력을 높이는데 기여하는데, 직접적 기여하지는 않지만 마케팅과 생산 역량을 높여 간접적으로 기여한다(완전 매개 효과). 또한 이 과정에서 멘토링의 정보적 지원 횟수는 외부 네트워킹 역량 제고가 생산 역량을 제고하는 매개효과에 영향을 준다(순수 조절 효과). 그러나 멘토링 정보 지원 횟수는 마케팅 역량 제고와 제품경쟁력에 별다른 조절 효과를 보이진 않는 것으로 나타났다. 연구를 통한 시사점은 다음과 같다. KISTI의 정보지원 인프라는 서비스 활용 마케팅이 이미 잘 진행되고 있다는 결론을 이끌 수도 있지만, 반면에 시장의 정보 불균형을 해소하는 공공적 기능보다는(열위 기업 지원) 성과가 잘 도출될 수 있는 집단을 지원해서(의도적 선택적 편의) 성과가 잘 나타나도록 관리하고 있다는 결론에 이를 수 있다. 연구 결과를 통해서 우리는 공공 정보지원 인프라가 어떻게 제품경쟁력 제고에 기여하는지 확인했는데, 여기서 우리는 다음과 같은 몇 가지 정책적 시사점을 도출할 수 있다. 첫째, 정보지원 인프라는 분석된 정보뿐만아니라 이 정보를 제공하는 기관(또는 전문가)과 지속적인 교류나 이런 기관을 찾는 역량을 높이는 기능이 있어야 한다. 둘째, 공공 정보지원 (온라인) 인프라의 활용이 효과적이라면 병행적인 오프라인 지원인 정보 멘토링이 지속적으로 제공될 필요는 없으며, 오히려 멘토링과 같은 오프라인 병행 지원은 성과 제고보다는 이상징후 감시에 적절한 장치로 활용되어야 한다. 셋째, 셋째, 공공 정보지원 인프라를 통한 네트워킹 역량 제고와 이를 통한 제품경쟁력 제고 효과는 특정 중소기업에서 나타나기 보다는 대부분 형태의 기업에서 나타나기 때문에, 중소기업이 활용 능력을 제고할 노력이 요구된다.