• 대한기계학회논문집B
• /
• 제35권4호
• /
• pp.431-438
• /
• 2011

비예혼합 화염의 부상 조건은 연소기의 운전 조건을 한정하는 매우 중요한 변수이다. 동축류 층류 비예혼합화염의 경우 점성계수와 물질 확산 계수의 비로 정의되는 슈미트 수가 1 보다 큰 조건에서 안정적인 부상화염이 존재하고 그 반대의 경우 부상이 불가능한 것으로 알려져 있다. 본 연구에서는 동축 관내에서의 화염의 부상 특성에 대해 슈미트 수가 1 보다 큰 프로판과 슈미트 수가 1 보다 작은 메탄 비예혼합 화염의 부상 안정화를 실험적으로 비교하였다. 그 결과, 제한된 공간에서는 슈미트 수가 1 보다 작은 조건에서도 안정적인 부상화염이 존재할 수 있음을 확인하였다. 그 원인 규명을 위해 간단한 비반응 유동장에 대한 수치해석을 수행하였다. 결론적으로 개방공간에서와는 달리 관내 조건에서는 유한한 크기의 화염 공간으로 인해 인접한 상류에서 유동 재편이 물질확산에 비해 선택적으로 재편됨으로써 새로운 안정화 기구가 형성될 수 있음을 확인하였다. 이러한 결과는 제한된 공간내에 화염이 형성되는 일반적인 연소기의 화염안정화 설명에 중요한 단서를 제공한다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.195-203
• /
• 2000

The local heat/mass transfer coefficients for arrays of impinging circular air jets on a plane surface are determined by means of the naphthalene sublimation method. Fluid from the spent jets is constrained to flow out of the system in one direction. Therefore, the spent fluid makes a crossflow in the confined space. The present study investigates effects of jet-orifice-plate to impingement-surface spacing and jet Reynolds number. The spanwise- and overall-averaged heat/mass transfer coefficients are obtained by numerical integrating the local heat transfer coefficients. The local maximum heat/mass transfer coefficients move further in the downstream direction due to the increase of crossflow velocity. At the mid-way between adjacent jets, the heat/mass transfer coefficients have a small peak owing to the collision of the adjacent wall jets and are affected strongly by the crossflow. The effect of the crossflow occurs strongly at the small orifice-to-impingement surface distance.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.19-26
• /
• 1999

An experimental study of twin-fluid atomization for powder metallurgy has been conducted using a specially designed atomizer in which liquid is first spread into a thin sheet and then exposed on both sides to high-velocity air. Inner air jet worked for supplying liquid and outer air jets disintegrated liquid sheet. The first result of this study were confined to the effect of atomizing quality through experiments with water. The experimental data will be extend to include the influence of atomizing air velocities on mean particle size through experiments with molten material. An experimental equation on the relationship between SMD and the related parameters was taken out; $$SMD=0.00302\frac{{(\sigma_L\;\rho_L\;D_L)}^{0.5}}{\rho_A(V_1+1.155\;V_2)/2}(1+\frac{W_L}{(W_{A1}/3.33)+W_{A2}})+0.0148(\frac{{\mu_L}^2}{\sigma_L\;\rho_L})^{0.425} \;{D_L}^{0.575}(1+\frac{W_L}{(W_{A1}/3.33)+W_{A2}})^2$$.

• 한국해안해양공학회지
• /
• 제6권1호
• /
• pp.34-39
• /
• 1994

흐름수역으로 방류되는 측면부력젵이 연안으로 귀환하는 현상과 희석경향에 대해 실험을 통하여 조사하였다. 실험에서 저흐름의 가로흐름 수역에 warm-water를 등수심으로 측면방류하여 횡방향으로 퍼짐과 수면으로 상승하는 열-plume이 발생하는 부력젵(buoyant jet)이 귀환현상을 얻었다. 실험에서 발생하는 귀환현상과 오염정체지역인 순환영역의 기하학적 구조 및 희석경향을 Froude수(F), 밀도 Froude수(F$_{o}$ ), 부력 특성길이(l$_{b}$)를 이용하여 멱법칙(Power law)으로 표현하였다. 보험결과 귀환현상은 R(U$_{o}$ /U$_{a}$ )<4, F/F$_{o}$ >0.22 일 때 발생하며, 희석은 x/l$_{b}$에 따라 변화하고 순환영역은 속도비(R)에 따라 변화함을 알 수 있었다.

• 한국가시화정보학회지
• /
• 제16권1호
• /
• pp.21-29
• /
• 2018

Homogeneous and isotropic turbulence (HIT) with no mean flow is a very useful type of flow for basic turbulence research. However, it is difficult to generate HIT in the lab. In this study, we implemented HIT in a confined box through synthetic jet actuators using sub-woofer speakers. Characteristics of HIT are varied depending on the strength of the jets. We used 2D PIV to measure the velocity field. Turbulence statistics such as homogeneity, isotropy ratio, turbulence kinetic energy, dissipation rate, Taylor microscale, Kolmogorov scale, and velocity correlation coefficient were calculated. Most of the turbulence statistics increased exponentially according to the strength of the jets, and the Taylor Reynolds number reached up to 185.

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.161-172
• /
• 2014

Hydrogen, which can be produced from abundant and widely distributed renewable energy resources, seems to be a promising candidate for solving the concerns for improving energy security, urban air pollution, and reducing greenhouse gas emissions. The two primary motivating factors for hydrogen economy are fossil fuel supply limitations and concerns about global warming. But the safety issues associated with hydrogen economy need to be investigated and fully understood before being considered as a future energy source. Limited operating experience with hydrogen energy systems in consumer environments is recognised as a significant barrier to the implementation of hydrogen economy. To prevent unnecessary restrictions on emerging codes, standards and local regulations, safety policies based on real hazards should be developed. This article studies briefly the direct impact-distances from hazard events such as hydrogen release and jet fire, and damage levels from hydrogen gas explosion in a confined space. Based on the direct impact-distances indicated in the accident scenarios and consumer environments in Korea, the safety policies, which are related to hydrogen filling station, hydrogen fuel cell car, portable fuel cell, domestic fuel cells, and hydrogen town, are suggested to implement hydrogen economy. To apply the safety policies and overcome the disadvantages of prescriptive risk management, which is setting guidance in great detail to management well known risk but is not covering unidentified risk, hybrid risk management model is also proposed.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.119-129
• /
• 1996

This study is concerned with the critical evaluation of predicative capability of a k-$\varepsilon$ turbulence model using the Renormalization Group(RNG) theory. The present numerical model for solution of the Navier-Stokes System is based on the modified PISO algorithms. Computations have been performed with the RNG-based K-$\varepsilon$ model for the two-dimensional flow over a backward-facing step, a confined coaxial jet, and a swirling flow in a swirl combustor. Numerical results are compared with experimental data in terms of mean flow velocities, turbulent kinetic energy, and turbulent stresses. Numerical results clearly indicate that the RNG-based K-$\varepsilon$ turbulence model shows a significant improvement over a standard K-$\varepsilon$ model in predicting the turbulent flows with flow separation and swirl.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.130-141
• /
• 1996

Numerical study of a confined, swirling, isothermal and spray-combusting flows has been presented. The pressure-velocity coupling in the Eulerian gas-phase equation is handled by the improved PISO algorithm. The droplet dispersion by turbulence is introduced by a Stochastic Separated Flow(SSF) model. The k-$\varepsilon$ turbulence model and the eddy dissipation model are employed to account for turbulence-combustion interaction. The detailed comparison with experimental data has been made for the isothermal jet swirling flows and the nearly monodisperse spray-combusting flow in the swirl combustor.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1997년도 추계 학술대회논문집
• /
• pp.49-54
• /
• 1997

Rice's monotone streamline upwind finite element method, which was proposed to treat convection-dominated flows, is applied to the linear triangular element. An alignment technique of unstructured grids with given velocity fields is used to prevent the interpolation error produced in evaluating the convection term in the upwind method. The alignment of grids is accomplished by optimizing a target function defined with the inner-product of a properly chosen side vector in the element with the velocity field. Two pure advection problems are considered to demonstrate the superiorities of the present approach in solving the convection-dominated flow on the unstructured grid. Solutions obtained with aligned grids are much closer to the exact solutions than those with initial regular grids. The capability of the present approach in predicting the appearance of the secondary vortex in the laminar confined jet impingement is shown by comparing streamlines to those produced by SIMPLE on a highly stretched grid toward the impingement plate.

• 한국가스학회지
• /
• 제16권6호
• /
• pp.29-33
• /
• 2012

이 연구에서는 최근의 액체수소안전관련 연구현황을 간략히 살펴보고자 한다. 액체수소 저장용기가 파손되어 액체수소가 누출될 수 있다. 누출된 액체수소는 풀을 형성하고 증발하여 수소증기 운을 형성한 뒤 증기운 폭발이 일어날 수 있다. 액체수소를 저장하고 있는 용기가 외부로부터 유입되는 열에 의하여 증발하는 가스를 처리하지 못할 경우에는 BLEVE가 발생할 수 있다. 압축된 수소가스가 있는 시설에서는 수소누출에 의한 제트화제가 발생하고 지연점화에 의하여 개방공간에서 플래시 화재 및 폭발이 발생할 수 있다. 이러한 여러 가지 사건에 대하여 최근의 기술개발과 향후연구개발 방향에 대하여 간략히 살펴보았다.