• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.72-78
• /
• 2006

Effect of organic loading rate on digester performance was evaluated under the conditions of same surface area/reactor volume ratio and different reactor diameter. At the low loading rate of $0.4\;kg\;COD/m^3{\cdot}d$, high rate of organic removal could be obtained regardless of reactor diameter. It can be estimated that reactor configuration can not affect reactor performance at the low loading rate. However, different performance depending on reactor diameter was observed at the organic loading rate of $6\;kg\;COD/m^3{\cdot}d$. That is, volatile acid accumulation and low COD removal efficiency was observed in reactor having 6.4 cm diameter, while volatile acid was not accumulated at all and high COD removal efficiency was observed in reactor having 3 cm diameter. Such a difference of reactor performance depending on reactor diameter can be explained that sludge bed can be fluidized by evolved gas bubble in narrow reactor while sludge bed can not be fluidized by evolved gas bubble only in wide reactor. At a high organic loading rate of $20\;kg\;COD/m^3{\cdot}d$, it can be judged that there is no relation between reactor configuration and reactor performance because all reactors showed very low COD removal efficiencies regardless of reactor diameter. Sludge bed fluidization is one of the most important factors in achieving efficient start-up of anaerobic digester. Narrow and tall type reactor is favorable condition for making sludge bed fluidization at a constant surface area/reactor volume ratio. Thus, it can be judged that reactor configuration and sludge bed fluidization have great influence to reactor performance.

• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.51-79
• /
• 2009

Today the service industry is growing, and differentiated services for marketing and service quality is emerging as a serious problem. Until now, the WebCam is used for observation, and the negative aspects, such as from a human rights issue has become. Discipline and Punish is not to use a webcam to customer satisfaction research is needed. Therefore, wireless monitoring in WebCam service quality of the service reconfiguration and service quality factors for the configuration of the customer's preference regarding how research was recognized. Configuration of the service quality factors WebCam service customer satisfaction and customer loyalty was to identify factors that affect. These services to study the correlation between the quality variables WebCam provides wireless monitoring services for the preschool and children, a survey of the house. Configuring a wireless monitoring service quality in order to research the factors WebCam video quality and transmission speed, mobility and portability, convenience, visibility, reliability, and the interaction of the castle set. Severely and video quality and transmission speed, visibility, reliability, customer satisfaction, the interaction factors are said. Inclination to participate in social issues, innovation, digital devices that use a skilled, depending on the difference in the service quality has been confirmed. However, the age and quality of service awareness and job types showed a low correlation, and the marketing of these results will be discussed and how that can be used.

• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.183-190
• /
• 2009

Increase in the elderly population has given rise to various social problems throughout Korean society, and what is more, although the greater demand of medical treatment, its development is still in its early stages. Given that Specialized Geriatrics Hospital has stood amid a range of spatial complication and it should faithfully reflect the needs of elderly population, we need a better understanding of Specialized Geriatrics Hospital. This study suggested the foundation to plan of Specialized Geriatrics Hospital through analyzing and evaluating spatial configuration of Specialized Geriatrics Hospital by "Space Syntax" and "J-Graph" The study focused on Specialized Geriatric Hospitals existing in Korea which owned more than 100 beds. The result of this study is summarized as follows; First, the rate of separated convex showed that the portions of the Treatment of outpatients and Supply have increased, but onthe other hand the portion of the The ward has been on the decrease. Second, in the case of Treatment of outpatients, it was structured Tree-shaped and the Tree-shaped could be separated with two types: waiting room and wailing room with lounge. in the case of The ward, it was structured Tree-shaped and also Ring-shaped. The more recently opened Geriatrics Hospital, the closer to Ring-shaped. Third, the access to the Ccentral treatment was low though the access to the core of the each floor was high. Fourth, in the progress of intelligibility, the fact that its value has decreased is becoming a serious problem of medical development for the elderly population finally, according to J-graph's analysis, the hallway made the spatial depth of rooms and public space more deepened. This caused by scattered arrangement of public spaces. As the only planning were considered in this study, It therefore needs more diversified approaches considering physical factors such like real distance and area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.711-721
• /
• 2014

PPWS, a large number of which a main cable of a suspension bridge consists of, must be precisely erected at a target location under construction considering the differences among design conditions. The absolute sag is measured for several PPWSs, which are reference strands and the relative sag is surveyed from them to other PPWSs, which are divided into several groups. And the adjustment of PPWS length is performed to erect it at target configuration. When PPWS is being under erection in a real bridge site, the procedures are as follows; evaluate sag sensitivities according to sag variation factors, calculate an adjustment length of PPWS corresponding to them and adjust a sag of PPWS by controlling the calculated amount of PPWS length. In this study, the differential-related equations of sag sensitivity were proposed for support movement of PPWS. Before site demonstration study of a series of them, we established a catenary model system and accomplished verification tests of them. From test results, the validation of them was done.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.4
• /
• pp.27-36
• /
• 2017

Purpose: The characteristics of spatial allocation planning in dentistry through examining the dental hospitals in Korea and comparison between them are necessary for the development of planning of the dental healthcare system. This study has been started to provide basic informations such as zoning, allocation distribution, and space configuration for the planning of dental hospital architecture. Methods: Literature review of dental care departments and investigation on current status of dental hospital in Korea have been conducted. The spatial allocation and space configuration of eleven dental hospitals have been analyzed. Results: The result of this study can be summarized in three points. The first one is that dental hospitals in Korea are consisted with eight to eleven dental care departments and they are divided with the horizontal allocation type with three to four departments in a floor for the spatial communication or the vertical allocation type with a department in each floor for the independent space. The second one is that oral medicine and oral maxillofacial radiology are located near the main entrance, orthodontics and pedodontic dentistry in lower level, prosthodontics in upper level, and conservative dentistry and periodontics have no specific spatial consideration. The third one is that the factors to consider the allocation planning are zoning for examination & diagnosis, basic practice, adolescence, surgery, circulations for patient, dentist, staff, different access for department like as easy access for reception and pedodontic dentistry, enclosure space for prosthodontics and surgery, frequency of visit and treatment care time, and change of treatment concept from treatment department to disease control corporative practice. Implications: This study is the starting point for the research of spatial configuration in dentistry and it is necessary to analyze the architectural planning to develop the dental healthcare system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.5
• /
• pp.279-288
• /
• 2013

Heat transfer and pressure drop characteristics of fin-and-tube heat exchangers having sine wave fins and oval tubes were investigated. Oval tubes having an aspect ratio of 0.6 were made, by deforming 12.7 mm round tubes. Twelve samples, having different fin pitch and tube row, were tested. The effect of fin pitch on the j and f factors was negligible. The effect of the tube row on the j factor, however, was different from that of common fin-and-tube heat exchangers having plain fins and round tubes. The highest j factor was obtained for a two-row configuration, while the lowest one was obtained for a one-row configuration. A possible reason was attributed to the flow mixing characteristics of the sine wave channel of the present geometry. Comparison with a plain fin-and-tube heat exchanger having 15.88 mm O. D. round tube reveals that the present oval fin-and-tube heat exchanger shows generally superior thermal performance, except for the one-row configuration.

• Wind and Structures
• /
• v.32 no.2
• /
• pp.127-142
• /
• 2021

Wind load acting on a standalone structure is different from that acting on a similar structure which is surrounded by other structures in close proximity. The presence of other structures in the surrounding can change the wind flow regime around the principal structure and thus causing variation in wind loads compared to a standalone case. This variation on wind loads termed as interference effect depends on several factors like terrain category, geometry of the structure, orientation, wind incident angle, interfering distances etc., In the present study, a three building configuration is considered and the mean pressure coefficients on each face of principle building are determined in presence of two interfering buildings. Generally, wind loads on interfering buildings are determined from wind tunnel experiments. Computational fluid dynamic studies are being increasingly used to determine the wind loads recently. Whereas, wind tunnel tests are very expensive, the CFD simulation requires high computational cost and time. In this scenario, Artificial Neural Network (ANN) technique and Support Vector Regression (SVR) can be explored as alternative tools to study wind loads on structures. The present study uses these data-driven approaches to predict mean pressure coefficients on each face of principle building. Three typical arrangements of three building configuration viz. L shape, V shape and mirror of L shape arrangement are considered with varying interfering distances and wind incidence angles. Mean pressure coefficients (Cp mean) are predicted for 45 degrees wind incidence angle through ANN and SVR. Further, the critical faces of principal building, critical interfering distances and building arrangement which are more prone to wind loads are identified through this study. Among three types of building arrangements considered, a maximum of 3.9 times reduction in Cp mean values are noticed under Case B (V shape) building arrangement with 2.5B interfering distance. Effect of interfering distance and building arrangement on suction pressure on building faces has also been studied. Accordingly, Case C (mirror of L shape) building arrangement at a wind angle of 45º shows less suction pressure. Through this study, it was also observed that the increase of interfering distance may increase the suction pressure for all the cases of building configurations considered.

• Steel and Composite Structures
• /
• v.44 no.2
• /
• pp.199-210
• /
• 2022

This study build finite element analysis (FEA) models describing the bending events of coiled tubing (CT) at the wellhead and trips into the hole, accurately provide the state of stress and strain while the CT is in service. The bending moment and axial force history curves are used as loads and boundary conditions in the diametrical growth models to ensure consistency with the actual working conditions in field operations. The simulation diametrical growth results in this study are more accurate and reasonable. Analysis the factors influencing fatigue and diametrical growth shows that the internal pressure has a first-order influence on fatigue, followed by the radius of the guide arch, reel and the CT diameter. As the number of trip cycles increase, fatigue damage, residual stress and strain cumulatively increase, until CT failure occurs. Significant residual stresses remain in the CT cross-section, and the CT exhibits a residual curvature, the initial residual bending configuration of CT under wellbore constraints, after running into the hole, is sinusoidal. The residual stresses and residual bending configuration significantly decrease the buckling load, making the buckling and buckling release of CT in the downhole an elastic-plastic process, exacerbating the helical lockup. The conclusions drawn in this study will improve CT models and contribute to the operational and economic success of CT services.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.479-485
• /
• 2023

Although fire incidents occur frequently in factory buildings, the focus has primarily been on property damage rather than human casualties. In this study, we conducted an analysis of RSET(Required Safe Egress Time) variation by examining the relocation of workbenchs using evacuation simulations. The results demonstrated that a simple change in workbench placement led to different RSET and variations in the feasibility of evacuation. Specifically, arranging workbenchs in a vertical configuration reduced travel time for workers and minimized total evacuation time. The hybrid layout of "vertical-horizontal" exhibited the shortest RSET, while the "horizontal-vertical" configuration resulted in the longest RSET. These research findings are significant as they provide practical alternatives to decrease RSET in small-scale factories where additional investments beyond essential safety equipment may pose challenges due to budget constraints. However, it is important to note that this study solely focused on comparing RSET while controlling for all other factors, without considering real-life fire simulations. Therefore, further research is necessary to integrate fire simulations and conduct comprehensive assessments of evacuation safety.

• Culinary science and hospitality research
• /
• v.19 no.4
• /
• pp.77-93
• /
• 2013

This study examines the university students majoring in culinary arts to survey the recognition levels of culinary arts education for the purpose of searching for a development plan for culinary education. A survey was conducted to 407 students in a cooking and food service program. To achieve the purpose of this study, SPSS 17.0, a statistics program, was used for a descriptive analysis, a frequency analysis, and a factor analysis. In this study, we have developed a device to measure educational service quality which can be applied to the place of higher education, and factors that determine educational service quality are dragged through this device. In addition, this research identifies which statistically significant factors play a part in overall satisfaction and interprets 26 quality attributes using importance-satisfaction transformed index. The interest and necessity of culinary arts education was very high while the performance degree was considered insufficient. In conclusion, if chances are given to display achievement of desire self-directly through increasing practical training, development and application of various programs, operation of open practice classes and curriculum organization reflecting social changes in the education courses, the culinary arts education will be considered to be more vitalized.