• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.1-6
• /
• 2013

Numerical optimization of two dimensional high lift configuration was performed with flow solver and optimization method based on RSM(Response Surface Model). Navier-Stokes solver with Spalart-Allmaras turbulence model was selected for the simulation of highly complex and separated flows on the flap. For the simultaneous optimization of both flap shape and setting (gap/overlap), 10 design variables (eight variables for flap shape variation and two variables for flap setting) were chosen. In order to generate the response surface model, 128 experimental points were selected for 10 design variables. The objective function considering maximum lift coefficient, lift to drag ratio and lift coefficient at specific angle of attack was selected to reduce flow separation on the flap surface. The present method was applied to two dimensional fowler flap in landing configuration. After applying the present method, it was shown that the optimized high lift configuration had less flow separation on the flap surface and lift to drag ratio was suppressed over entire angle of attack range.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.49-56
• /
• 1999

In this paper, the general formula of disparity estimation based on Bayesian Maximum A Posteriori (MAP) algorithm is derived. The generalized formula is implemented with the plane configuration model and applied to multiple baselined stereograms. The probabilistic plane configuration model consists of independence and similarity among the neighboring disparities in the configuration. The independence probabilistic model reduces the computation and guarantees the discontinuity at the object boundary region. The similarity model preserves the continuity or the high correlation of disparity distribution. In addition, we propose a hierarchical scheme of disparity compensation in the application to multiple-view stereo images. According to the experiments, the derived formula and the proposed estimation algorithm outperformed other ones. The proposed probabilistic models are reasonable and approximate the pure joint probability distribution very well with decreasing the computations to O(n(D)) from O(n(D)4) of the generalized formula. And, the hierarchical scheme of disparity compensation with multiple-view stereos improves the performance without any additional overhead to the decoder.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.577-585
• /
• 2016

In this paper, model of the axial-flux permanent magnet synchronous generator (AFPMSG) having arc-shaped trapezoidal permanent magnets (PM) is presented. The proposed model reduces the cogging torque and torque ripple, at the expense of lowering the average output torque. Optimization of the proposed model is performed by considering the asymmetric overhang configuration of the PMs, as to make the output torque of the proposed model competitive with the conventional model. The time stepped 3D finite element analysis (FEA) is performed for the comparative analysis. It is demonstrated that the torque ripple of the optimized model is highly reduced as well as average output torque is increased.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.524-530
• /
• 2011

This paper analyzes fault tolerance under a stator turn fault, according to the winding configuration. Improvement of torque characteristics and fault tolerance can be achieved by winding configuration without additional methods. And, torque characteristics and fault tolerance according to the winding configuration can be usually analyzed by analytical method. But, when the stator turn fault generates, compare to the steady-state, analysis of torque characteristics and fault tolerance using the analytical method is not accurate because it does not reflect influence in mutual inductance and magnetic non-linearity. Therefore, analysis of torque characteristics and fault tolerance has to be performed by using the numerical method under fault condition. This paper develops fault characteristics according to the winding configuration using the FEM-base model considered magnetic non-linearity. And, this paper suggests fault tolerance improvement according to the winding configuration, by the comparison of 8/12 and 10/12 models, under fault condition.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.284-292
• /
• 2005

This paper presents a new framework of kinematic tolerance synthesis and describes the implemented algorithm for planar mechanical systems comprised of higher kinematic pairs. Input to the synthesis algorithm is a parametric model of the mechanical system with allowed parameter ranges (tolerance ranges). The model is specified as the part profiles consisting of line and arc segments and the motion axes along which each part moves. The algorithm analyzes tolerance in generalized configuration space, called contact zones bounding the worst-case variations, and identifies bad system variations. The bad system variations then are removed out of the parameter ranges by adjusting the nominal parameter values if possible and then shrinking the ranges otherwise. This cycle is repeated until no more bad variations we found. I show the effectiveness of the algorithm by case studies on several mechanisms.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.195-205
• /
• 2001

The mechanical properties of aluminum honeycomb on the direction of axial crushing under quasistatic loading test was investigated. The crushing process was simulated numerically by full-scale finite element models. Simulations reproduce the experimental results both qualitatively as well as quantitatively. From the investigation, we suggested the constitutive model of energy absorbing honeycomb structure for large scale impact analysis. Real impact test of the WB(Moving Deformable Barrier) was carried and compared with finite element simulation. Constitutive model used in the numerical simulation had a good correlation with experiment. By suggesting the optimizing method fur honeycomb cell configuration design, relationship between cell configuration and crush strength is studied.

• 한국정보처리학회논문지
• /
• 제3권4호
• /
• pp.709-719
• /
• 1996

DHCP는 호스트에게 IP(Internet Protocol) 주소나 구성 파라미터 (Configuration Parameter) 등을 동적으로 할당해주는 프로토콜이다. 그러나 이프로토콜은 메시지를 교환하기 위해 브로드캐스팅을 이용하기 때문에 네트워크에 과중한 트래픽의 발생 요인이 된다. 이러한 오버헤드를 줄이기 위해 메시지 교환시에 가능하면 브로드 캐스 팅을 피하고, 간결하고 효율적인 클라이언트-서버의 동작 메처니즘을 설계하였다. 본 연구에서는 DHCP가 유발하는 브로드캐스팅 트래픽 특성을 고찰하여 메시지를 유치캐스트 할 수 있는 방안과 트래픽을 줄일 수 있도록 알고리즘을 개선한 DHCP의 모델을 구현하였다.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.114-119
• /
• 2002

Cochlea is well known to have the ability to analyze a wide frequency and this ability seems to be caused to the Basilar Membrane(BM) configuration. However, the relationship between the Cochlea frequency-position map is not clear. In this paper, the three-dimensional BM Model was made using the Finite Element Method. Then an attempt was made to examine the influence of the BM configuration on the Cochlea frequency-position map. Theoretical consideration reveals that the wide frequency-position of Cochlea is achieved by not only the BM configuration change along the length of the Coohlea but also the change of the Young's module of the BM along the length of the Cochlea.

• 천문학회보
• /
• 제46권2호
• /
• pp.64.1-64.1
• /
• 2021

Accretion flows around black holes and neutron stars emit high energy radiation with varying spectral and timing properties. Observed timing variations, both short and long-term, point to the existence of a mechanism, dictated by the flow dynamics, and not by the stellar surface or magnetic fields, that is common in both. Spectral energy distributions of multiple sources indicate that the Comptonization process, the dominant mechanism for changing states in X-ray, takes place inside the flow that has similar physical properties in both the objects. In a series of observational and numerical studies, we enquire about the following: 1. Is there a steady state configuration for accreting matter around black holes that can explain spectral and timing properties? 2. Could a similar formalism explain spectral and timing properties of accretion around neutron stars? 3. Could there be a generalized flow configuration for accreting matter around such compact objects? Furthermore, we show that a unified spectral model can be constructed based on the generalized flow configuration, common to black holes and neutron stars.

• 정보처리학회논문지C
• /
• 제9C권4호
• /
• pp.497-504
• /
• 2002

본 논문에서는 시스템의 네트워크 구성 장애를 관리하기 위한 관리 모델과 에이전트들 간의 협력을 통한 장애의 진단 및 복구 알고리즘을 제시하고 있다. 관리 모델에는 장애의 검출, 진단, 복구의 세 단계로 이루어지며 각각은 RBR(Rule-Based Reasoning)에 기반으로 하여 규칙기반 지식 데이터베이스에 있는 규칙을 이용하여 네트워크의 구성 장애를 진단하고 복구한다. 또한 관리 도메인 상의 네트워크에 분포하고 있는 여러 에이전트들 간의 협력을 통하여 시스템 단독으로는 해결할 수 없는 복잡한 문제를 해결하거나 네트워크의 상황까지 고려하여 진단하고 복구함으로써 효율적인 시스템의 네트워크 구성 관리 알고리즘을 제시하고 있다.