• Journal of Korean Foot and Ankle Society
• /
• v.16 no.3
• /
• pp.169-174
• /
• 2012

Purpose: There are various methods proposed for the evaluation of the hindfoot alignment. However, due to structural calcaneus variances between patients, it is hard to assess this alignment definitively. Thus, this study proposes a new method for evaluating of the hindfoot alignment and its comparisons to the existing current methods. Materials and Methods: This study includes simple weight bearing hindfoot coronal view radiographs of 120 patients, taken between the time period of March 2008 to November 2009. Among the 120 patients, there was a 1:1 ratio of male to female with an average age of 40. The newly proposed method for evaluating this alignment is to draw a moment arm from the point where the sustentaculum tali meets the medial calcaneus border to the most prominent aspect of the lateral process of the calcaneal tuberosity. The angle produced via the intersection of this moment arm to the mid-longitudinal axis of the tibia is found and used to evaluate the hindfoot alignment. The inter and intra-observer reliability was evaluated using the coefficient of intraclass correlation. This study also investigates the comparisons between the newly proposed method to the traditionally used Saltzman et al hindfoot alignment evaluating technique. Results: The newly proposed method has higher inter and intra-observer reliability than the existing traditional Saltzman et al technique. Conclusion: This new method is recommended over the traditionally used Saltzman et al technique as it has a stronger confidence level and is appropriate for assessing hindfoot alignment in simple radiographs.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.185-190
• /
• 2003

We applied modified least square method (MLS) and ordinary least square method (OLS) to 1st order equation for the comparison of the uncertainties calculated by these methods. The uncertainty calculated by OLS covered statistically safe interval because it was over-estimated in many cases of measurement and concentration level. But, if the uncertainty of the concentration as a reference value was comparably large (about 5% of the relative standard deviation of random scattering from the regression line and about 7% of relative standard uncertainty of reference values), then uncertainty calculated by OLS was seriously under-estimated at high concentration level. It was revealed that the calculated uncertainty didn't cover statistically safe interval at the stated confidence level. It was found that the method, MLS, described in the previously article would be valid for this calculation of uncertainty.

• Journal of Internet Computing and Services
• /
• v.22 no.2
• /
• pp.69-75
• /
• 2021

In a contact-free society, online services are becoming more important than classic offline services. At the same time, the role of a contact center, which executes customer relation management (CRM), is increasingly essential. For supporting the CRM tasks and their effectiveness, techniques of process automation need to be applied. Quality assurance (QA) is one of the time and resource consuming, and typical processes that are suitable for automation. In this paper, a method of automatic quality evaluation for voice based consultations is proposed. Firstly, the speech in consultations is transformed into a text by speech recognition. Then quantitative evaluation based on the QA metrics, including checking the elements in opening and closing mention, the existence of asking the mandatory information, the attitude of listening and speaking, is executed. 92.7% of the automated evaluations are the same to the result done by human experts. It was found that the non matching cases of the automated evaluations were mainly caused from the mistranslated Speech-to-Text (STT) result. With the confidence of STT result, this proposed method can be employed for enhancing the efficiency of QA process in contact centers.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1708-1714
• /
• 2019

The purpose of the critical evaluation of the spent fuel pool (SFP) is to verify that the maximum effective multiplication factor ($K_{eff}$) is less than the critical safety limit at 100% stored condition of the spent fuel with the maximum reactivity. At nuclear power plants, the storage standard of spent fuel, ie, the loading curve, is established to prevent criticality from being generated in SFP. Here, the loading curve refers to a graph showing the minimum discharged burnup versus the initial enrichment of spent fuel. Recently, US NRC proposed the new critical safety assessment guideline (DSS-ISG-2010-01, Revision 0) of PWR SFPs and most of utilities in US is following it. Of course, the licensed criterion of the maximum effective multiplication factor of SFP remains unchanged and it should be less than 0.95 from the 95% probability and the 95% confidence level. However, the new guideline is including the new evaluation methodologies like the application of the axial burnup profile, the validation of depletion and criticality code, and trend analysis. Among the new evaluation methodologies, the most important factor that affects $K_{eff}$ is the axial burnup profile of spent fuel. US NRC recommends to consider the axial burnup profiles presented in NUREG-6801 in criticality analysis. In this paper, criticality effect was evaluated considering three profiles, respectively: i) Axial burnup profiles presented in NUREG-6801. ii) Representative PWR axial burnup profile. iii) Uniform axial burnup profile. As the result, the case applying the axial burnup profiles presented in NUREG-6801 showed the highest $K_{eff}$ among three cases. Therefore, we need to introduce a new methodology because it can be issued if the axial burnup profiles presented in NUREG/CR-6801 are applied to the domestic nuclear power plants without any other consideration.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.552-558
• /
• 2005

A type of dimethyl sulfide gas CRM in the ppb level was developed for the analysis of trace-level odorous gas in environmental atmosphere. The concentration of dimethyl sulfide ($(CH_3)_2S$) was 10 umol/mol level in the cylinder filled with nitrogen, 1500 psi. And the variability of the concentration for 3 years was about 0.1% due to the adsorption or instability of $(CH_3)_2S$. The gas standards produced simultaneously in 4 bottles and examined by GC-FID were shown with 0.4%, reproducibility of preparation and 0.25%, standard uncertainty due to weighing and purity. The relative expended uncertainty of 1.1% (95% of confidence level, k=2) was assigned to the certified value of 10 umol/mol level of $(CH_3)_2S$ after quantitative evaluation on the purity, mixing, weighing, analysis, adsorption and stability of dimethyl sulfide gas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.41-47
• /
• 2006

The construction of traffic facilities has generated a variety of problems in the equality and efficiency when it would be planed and evaluated. One of the reasons for these phenomena isn't the definition of an objective standard about benefit items. Thus, results of evaluation couldn't give a demonstration of confidence. But, the traffic facility construction and its operation costs are securely appeared. Therefor, it will be demonstrated to decide the benefit items in this study. Before deciding the items, user's satisfaction evaluation and economic analysis would be carried. We find out subway user's satisfaction higher than load traffic mode user in satisfaction evaluation, while subway's economic feasibility is lower than load facility, as a result of B/C analysis. In this inconsistent results, we found out that the benefit value is a little lower because of indefinite standard of it's items as comparing Busan Metropolitan City's population with subway's modal split ratio. Accordingly, we enumerate some benefit items in the case of feasibility evaluation as constructing traffic facility. And each of evaluation items' weight is estimated by using ANP. We found out that the weight value of accessibility has the highest one, that of punctuality has second, that of travel time has third, and benefit items according to improvement of user's traffic condition have much more important than those which were considered in the existence economic analysis.

• Journal of The Korean Ophthalmological Society
• /
• v.60 no.2
• /
• pp.144-151
• /
• 2019

Purpose: Intravitreal aflibercept, ranibizumab, bevacizumab, and dexamethasone are the most widely used drugs in the treatment of diabetic macular edema (DME). The aim of this study was to compare the efficacy and safety of anti-vascular endothelial growth factors and dexamethasone for the treatment of DME. Methods: There were nine previous systematic reviews on this topic; we updated these high-quality reviews. Seven studies were added to two studies following a literature search. Efficacy outcomes were 1) average improvement in visual acuity, 2) proportion of patients who experienced an improvement in vision (an increase in best-corrected visual acuity (BCVA) of ${\geq}15$ in the Early Treatment Diabetic Retinopathy Study [ETDRS]), and 3) proportion of patients who experienced worsening vision (a decrease in BCVA of ${\geq}15$ in the ETDRS). Safety outcomes included systemic adverse events and ocular-related adverse events. Results: The mean difference in the BCVA for ranibizumab versus bevacizumab treatment was 0.16 (95% confidence interval [CI]: -0.02, 0.34), and that for ranibizumab versus aflibercept was -0.08 (95% CI: -0.26, 0.10). The mean difference in the change of BCVA for aflibercept versus ranibizumab was -0.20 (95% CI: -0.40, -0.01), and that for aflibercept versus bevacizumab was -0.34 (95% CI: -0.53, -0.14). Other efficacy outcomes showed similar trends, and there was no significant difference between treatments. There was also no significant difference in both systemic and ocular adverse events rates between the treatments. Conclusions: In DME patients, the efficacy of aflibercept was found to be higher with respect to BCVA changes compared with ranibizumab or bevacizumab. However, there were no significant difference in terms of visual acuity improvement or visual acuity of more than 15 letters, nor in terms of anti-vascular endothelial growth factors (as a safety outcome).

• Korean Journal of Environmental Agriculture
• /
• v.36 no.3
• /
• pp.184-192
• /
• 2017

BACKGROUND: This study was performed to evaluate the residue dissipation of boscalid and spinetoram on crown daisy and sweet pepper affected by the morphology of the crop. The half-lives and dissipation rate constants for boscalid and spinetoram on crown daisy and sweet pepper were calculated. And then lower limit of 95% confidence interval for dissipation rate constant could be used to propose the pre-harvest residue limit. METHODS AND RESULTS: The pesticide products diluted according to the pesticide label were applied one time on crown daisy and sweet pepper at 2 field sites, respectively. Initial concentration of boscalid and spinetoram on crown daisy after application were in the range of 72.80~117.15 mg/kg and 2.82~4.67 mg/kg, respectively. And Initial concentration of boscalid and spinetoram on sweet pepper were in the range of 1.58~1.62 mg/kg and 0.10~0.21 mg/kg, respectively. Boscalid and spinetoram for crown daisy dissipted below the maximum residue limit(MRL) at 10 and 2 days after application, respectively. All residues concentration of boscalid and spinetoram for sweet pepper below the MRL at 0 day after application. The half-lives based on dissipation rate constant for boscalid and spinetoram on crown daisy were 4.2~4.9 days and 3.0~2.4 days respectively. And the half-lives for boscalid and spinetoram on sweet pepper were 6.7~7.0 days and 2.8~4.0 days respectively. CONCLUSION: The difference in initial concentration of boscalid and spinetoram among crop commodities were due to different crop morphology with larger surface areas. This study was suggested that pre-harvest residue limit would be calculated from lower limit of 95% confidence interval for dissipation rate constant and would be useful to protect consumers by controlling the pesticide residues in crop.

• Journal of The Korean Association For Science Education
• /
• v.40 no.4
• /
• pp.429-436
• /
• 2020

In this study, we examined students' science academic achievement through an analysis of the national assessment of educational achievement(NAEA) from 2015 to 2018 when the 2009 revised curriculum was applied. This study analyzed achievement average scores by gender and region and also analyzed the trend of the rate of achievement level in order to understand the characteristics of students' academic achievement. In addition, we analyzed the characteristics of the affective aspect using a survey of students' attitudes (confidence, interest, value, and willingness to learn) toward science. The main findings are as follows; First, the average science score shows a tendency to decrease year by year at the middle school level. Second, when analyzed by achievement level, the decline in the advanced group was large, and the rate of the below basic group increased. Third, comparisons of the average achievement scores by gender, female students' scores were generally high and the difference in achievement scores between male and female students tended to increase. Fourth, a characteristic gap was found between regional scales that increased in the advanced group. The results of a questionnaire on students' attitudes show that the four constructs of the students' attitudes had a significant correlation with the average achievement scores. In addition, the mean and positive response rates on the confidence, interest, and value of science in the above proficiency group increased but decreased in the below basic group. These results can be used as basic data for revising the curriculum, improving teaching and learning, and establishing educational policies.

• School Mathematics
• /
• v.13 no.4
• /
• pp.697-716
• /
• 2011

It is known that Korean students performs very well in mathematics but show poor attitude toward mathematics. However, attitude itself is an important goal of education and it also promotes students learning. Therefore, it is important and urgent for us to find a way to improve students' attitude toward mathematics. In this article, we tried to examine characteristics of Korean students' attitude toward mathematics and identify student and school level factors affecting it. For this purpose, we analysed National Assessment of Educational Achievement (NAEA) data in 2007 when NAEA was conducted especially focused on mathematics. Main findings of this research are as follows. First, we found that attitude toward mathematics got lower as students advanced to higher grades. And among 3 sub-domains of attitude toward mathematics, interest and self-confidence were lower than perception of value of mathematics. Secondly, attitude toward mathematics was mainly affected by student background variables such as gender, achievement, participation in private tutoring, father's education level. And while school factors contributed relatively little to students' attitude toward mathematics, teacher's perception on value of school education was positively related with students' attitude in high schools and emphasis on assessment was negatively related with students' attitude in elementary schools.