• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.350-353
• /
• 2009

The shielding enclosure is very essential device to test the electromagnetic wave power generated by various RF equipments. Some standards for the shielding enclosures were established to test them in right method. Generally, There are IEEE-STD-299 and MIL-STD-285 and NSA-65-6 of the method for measuring the effectiveness of shielding enclosures, the IEEE-STD-299 combined MIL-STD-285 and NSA-65-6 about the method for measuring shielding effectiveness(SE) about 1969 years, but, the measurement point of 299 proposal is many points(including shielding wall, seam, coner beat, shielding door, etc) and demand long time of measurement. To improve SE test method for shielding enclosures was studied and suggested to develop a proper test procedure. First, we measure reference level as frequency range and H/V polarization, secondly, measure leakage point, and finally, measure shield effect and calculate SE. Our method has a merit of the less measurement point than IEEE-STD-299, and shorten time than 299, and define representation SE of shielding enclosure effectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.3
• /
• pp.173-181
• /
• 2016

Several falling-sensing terminals have been developed which are able to detect the fall/upset accident of the elderly and transmit the collapsing signals to the administrative server via RF communication using 400MHz bandwidth. Supposing there might be no communication problem within a sanatorium, just single terminal without relay function had been made as a prototype in the first stage of development. However some communication problems have discovered at the coner of the floor apart from the other floor diagonally in the same building. Same kind of problems have been happened in the area behind a steel fence or a car. To solve these kinds of communication problems, we have developed several terminals and added up relay function to them. In this paper we represented that the success ratio of the communication has been improved by using relay function among several terminals.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.39-42
• /
• 2005

블록기반의 비디오 부호화 표준은 비디오 신호의 압축방식으로 가장 널리 쓰이는 구조이지만 무선 환경과 같은 저 비트율 응용에서는 양자화에 의한 고주파 성분의 손실로 인해 블록킹 현상 및 링잉 현상이 두드러져 화질열화의 주된 원인이 된다. 이러한 화질열화를 제거하기 위해서 디블록킹 필터와 디링잉 필터를 사용하지만, 영상에 따라 블륵 경계의 모서리 부분과 대각선 에지가 만나는 부분에서 나타나는 corner outlier 현상으로 인해 화질이 충분히 개선되지 못하는 경우가 발생한다. 본 논문에서는 저 비트율 비디오에서 에지의 방향과 그 에지를 포함하는 블록의 평탄한 정도를 이용하여 corner outlier 현상을 검출하고, 이를 제거할 수 있는 비선형 필터를 제안한다. MPEG-4 호화 영상 및 MPEG-4 디블록킹 필터를 적용한 영상에 대해서 제안한 비선형 필터를 적용하여 주관적 화질이 개선됨을 실험을 통하여 보인다.

• Mycobiology
• /
• v.35 no.1
• /
• pp.1-5
• /
• 2007

Three species of the genus Euphoriomyces (Laboulbeniales) were found newly from Korea. E. agathidii (Maire) Tavales was collected from Agathidium sp. (Leiodidae, Coleoptera). The characteristic traits of this species are the distal portion of the primary axis composed of $5{\sim}11$ superposed layers and bearing more or less the elongated appendages. E. cybocephali (Thaxter) Thaxter was collected from Pseudocolenis hilleri Reitter (Leiodidae, Coleoptera). The primary axis of this species composed of $5{\sim}9$ superposed layers is simple, not branched and a single antheridium occurs on the apex of the secondary axis. E. sugiyamae Majewski was collected from Scaphisoma rufum Achard (Scaphidiidae, Coleoptera). This species is very unique in having the antheridia formed as coner cells with lateral necks.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.389-392
• /
• 2005

In this study, the effect of thickness of sprayed fireproofing on temperature of main bars under fire test was investigated for high strength concrete member(column) prevented the spalling. The thicknesses of sprayed fireproofing were 0, 10, 20 and 30mm. Test was carried out according to ISO-KS standard temperature-time curve during 3hrs. Based on temperature results of main bars after 3hrs, it appears that the temperatures of the main coner bar are about 400$^{circ}C$ and 500$^{circ}C$, when the thicknesses of sprayed fireproofing are 5mm and 2mm, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.435-437
• /
• 1998

In this productive system, it needs to control the each axis motion harmoniously to perform accurately for the manufacturing, transporting and printing. Independent Axis Control usually used for this objection. However, if Independent Axis Control mismatched the parameter of each axis system or in the case of free curve tracking or the case of high speed control, there would be big contour error so that cannot achieve control objection. As a result, there is Contour Control method suggested to supply for this defect. This paper carried modeling of biaxial system and implemented Independent Axis Control & Contouring Control on straight line, circular, and coner path by simulation and experiment. If feedrate increased, contour error growed. In consequence, according to this factor, we introduced contouring controller, so we could find the fact that contour error was reduced more than that of independent axis control about each path.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.6
• /
• pp.366-371
• /
• 2005

For an autonomous mobile robot localization, it is very important for the robot to be able to recognize indoor environment and match a detected object to an object defined within a map developed either online or of offline. Given the map defining the locations of geometric beacons like wall and corner existing in the robot operation environment, this paper presents a stereo ultrasonic sensor based method practically applicable in recognizing the geometric beacons in real-time. The stereo ultrasonic sensor used in the experiment consists of an ultrasonic transmitter and two ultrasonic receivers placed symmetrically about the transmitter Experimental results are provided to demonstrate that the proposed method is more efficient in recognizing wall and coner than the conventional method of using multiple number of transmitter-receiver pairs.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.145-152
• /
• 2001

Open education, which has been introduced spontaneous1y to many countries, has been giving some strong influence to the primary education in Korea and has been widely used in Korea itself. This report deals with the ineffectiveness of the learning space which has been divided into common classroom and particular classroom. The division of the learning space sets the problem of defining which is the particular of common subject, and the problem of a child to move around for different subject. For the architectural design of school, it is essential for learning space to be suitable for the characteristics of each subjects. The space needed for individual subjects requires tole learning space that is different to the space needed for basic academic subjects. The introduction of different corners in the classroom can be the solution. Individual corners can be divided into the necessary coner, the standard corner, the elective corner and the corner fur facilities.

• Journal of the Korean Society of Safety
• /
• v.23 no.5
• /
• pp.91-96
• /
• 2008

A reflected breakwater can be affected by wave pressure and power because it is to be concentrated by wave energy. The present study is to estimate hydraulic behavior affecting around a reflected breakwater, which is discontinuity cases and various angle of coner at the breakwater. The numerical model to investigate wave diffraction, which is important hydraulic factor in the ocean, is performed by using direct boundary element method. The present numerical results are compared with the solutions of approximate and absolute based on an eigenfunction, and the solution of analytical by Fresnel integral. The results of the present numerical simulation agreed well with those of the published numerical and analytical data. As a result of this study, wave height is high at the comer of breakwater, and it is to be high if angle of conner at the reflected breakwater is small.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.308-311
• /
• 2007

본 연구에서 개발할 설계기술은 부가가치가 매우 높은 소량 다품종 건축용 내 외장재의 금속 패널코너가공법에 관한 것이다. 금속 금구류 및 건축용 내 외장재로 사용되는 2.5mm이상 되는 금속강판을 사용함에 있어서 가장 문제가 되는 직각코너링 접합부위에서 발생되는 내식성(수명성), 내후성, 및 미려성(디자인)을 향상시키므로 품질의 향상뿐만 아니라 소량 다품종의 생산성을 증대시킬 수 있는 국내 최초 금속패널 코너가공을 할 수 있는 벤딩다이시스템(Bending Die System)을 설계하고자 한다.