• 한국농공학회지
• /
• 제45권2호
• /
• pp.96-106
• /
• 2003

134 Dutch cone (mechanical cone) and 9 piezocone (electronic cone) penetration tests have been performed in the southwestern part of Korea. In general, Dutch cone results may be different from that of piezocone due to the difference in structure of the cones. 6 Dutch cone and piezocone test data which were obtained at the same point respectively, were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986, 1990). Cone factors of Dutch cone and piezocone test empirically have been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Relationship formula was also suggested. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-244
• /
• 2002

A comparative study of 134 mechanical (Dutch cone) and 9. electronic cone (Piezocone) penetration data from the southern part of Korea has been performed. In general, Dutch cone results may be different from piezocone results due to the difference in structure of the cones. Cone penetrometer test data were analyzed and plotted in soil classification chart proposed by Robertson et. al.(1986,1990) Cone factors of Dutch cone and piezocone test have empirically been determined using laboratory and field vane test results. Using this cone factors, it was shown that there was good correlation between shear strength estimated using cone resistance and that of laboratory test and field vane tests. It was found that there was a good correlation between cone resistance from Dutch cone and that from piezocone. Dutch cone test provides a useful means for stratigraphic profiling in large project and has some advantage over piezocone in particular situations, such as very soft clay ground and dredged area.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.792-801
• /
• 2016

철도노반에 대한 지반조사 방법은 표준관입시험(SPT), Cone 관입시험 등이 널리 이용되고 있다. 그러나 표준관입시험은 시험장비가 크기 때문에 운행선 주변의 전철주 등에 접촉 위험이 있어 적용에 어려움이 있다. 그리고 휴대용 장비인 DCP(Dynamic Cone Penetrometer)의 경우 타격에너지가 부족하고 관입되는 Cone-rod의 강성이 부족하므로 필요 깊이까지 관입이 불가능하여 사용에 제한을 받고 있다. 이에 본 연구에서는 휴대용 장비이면서 타격에너지와 강성이 큰 Pagani Cone Test를 표준관입시험과 동일한 지반에서 시험을 실시하여 N값을 비교 분석하였다. 그 결과 Pagano Cone Test의 N값을 보정시 사질토에서 SPT의 N값의 1.48배, 점토에서 1.33배를 얻었으며, Pagani Cone Test의 N값과 표준관입시험의 N값과의 상관관계를 제안하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.349-360
• /
• 2009

The cone penetration test(CPT) has gained its popularity in site characterization indebted by its reliability, speed, economy, and automatic measurement system since its development in the 1930s. The CPT results, commonly consisting of cone tip resistance, sleeve friction, and pore water pressure measurements, allow us to classify soils as well as to reveal their engineering characteristics. The site condition at which the CPT is allowable is often dependent on the capacity of a CPT system. In Korea, it has been considered that the CPT could be appled only to soft soils in most cases because CPT systems available for stiff soils are very rare due to their expensive procurement and maintenance cost. Luoisiana Transportation Research Center(LTRC) has developed and implemented a field-rugged continuous intrusion miniature cone penetration test(CIMCPT) system since the late 1990s. The miniature cone penetrometer has a sectional cone area of $2cm^2$ allowing system capacity reduction compared to the standard $10cm^2$ cone penetrometer. The continuous intrusion mechanism allows fast and economic site investigation. Samsung Engineering & Construction has recently developed and implemented a similar CIMCPT system based on its original version developed in LTRC. The performance of the Samsung CIMCPT system has been investigated by calibration with the standard CPT system at a well-characterized test site in Pusan, Korea. In addition, scale effect between the miniature cone penetrometer and the standard cone penetrometer has been investigated by comparing the field test results using the both systems.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.203-206
• /
• 2003

The liquid limit(LL) test is universally used as a standard test for determining one of the index properties of a clay. There are two methods of determining the LL, Casagrande method and cone penetration method that is fall cone test. The interpretation of the Casagrande method of obtaining the LL is not obvious, but it has been suggested that the fall cone test is essentially a strength test and that the LL test simply ascertains the moisture content at which a clay has a certain standard undrained shear strength. This paper presents a determination of the LL by a single-point method. Results obtained from fall cone that is general method and a single-point method are analyzed by comparison.

• 한국지반공학회논문집
• /
• 제32권10호
• /
• pp.5-15
• /
• 2016

본 연구에서는 소형콘의 관입저항력을 이용한 점토의 액성한계를 측정하기 위하여 카올리나이트 점토와 벤토나이트 점토의 비율을 다양하게 혼합한 점토흙에 대하여 함수비와 소형콘의 관입저항력을 조사하고 기존의 동적(Casagrande 시험법) 및 정적(Fall cone 시험법) 액성한계 시험결과와 직접 비교하였다. 비교결과 다양한 점토흙의 함수비에 따른 관입저항력 관계곡선에서 변곡점이 형성된다는 것을 파악하였으며 이 때의 함수비가 정적액성한계(Fall cone)시험법에 의한 액성한계 값과 매우 유사함을 파악하였다. 변곡점이 형성된 점에서의 소형콘의 관입저항력은 약 0.2kPa로 나타났으며 이 때 의 함수비가 점토흙의 액성한계를 나타낸다는 것을 확인하였다. 이와 같은 연구결과를 토대로 향후 점토의 액성한계를 파악하는데 본 연구에서 조사된 0.2kPa의 소형콘의 관입저항력이 유용한 지표가 될 수 있다는 사실을 파악하였다. 또한 소형콘의 관입저항력을 이용한 액성한계 시험법을 제시하였다.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.17-28
• /
• 1987

본연구에서는 해양토질의 전단강도 산정에 대한 Cone관입시험의 신뇌도를 조사하였다. 사질토에 대하여는 내부마찰각의 불확정성을 조사하였으며, 불확정성에는 자료의 공간적 변화와 해석에 사용 되는 공식의 모텔오차 등이 있고, 그중 해석모텔의 오차가 가장 큰 불확정성이었다. 해석 방법마다 구한 내부마찰각이 서로 다르므로, 해석결과를 종합할 수 있는 주관적 견해개념(subjective opinion) 을 도입하였다. Cone관입시험을 이용하여 잡토지반에서 비배빙전단강도를 산정하기 위해서는 실훈시험이나 현장베인 시험으로 구한 전단강도와 Cone 저항력의 경험적인 관계를 이용하여야 한다. 비배수전단강도의 불확정성은 Cone 계수(Nk)의 자료 산포, Nk의 모델 오차, 이방성과 Cone 저항력의 공간적 변화 등에 기인하며, Nk의 자료산포가 가장 큰 불확정성이었다. Nk값의 산정에 이용되는 비교강도시험은 실내시험보다는 현장베인시험의 신뢰성이 더 큰 것으로 나타났다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권6호
• /
• pp.107-113
• /
• 2010

This paper presents the prediction of shear strength of oil contaminated clay using fall cone test used to determine the liquid limit of soil. The penetration depth of fall cone is related to water content of soil. Laboratory vane shear can also be related to water content. To explore the relative correlation between penetration depth of fall cone and laboratory vane shear, both fall cone tests and laboratory vane shear test were carried out with water contents of soil. The developed empirical relationships in this studys showed that the shear strength is reduced to 3.9% with 1% increase of oil content. And, the lesser initial water content of contaminated clay, the more shear strength of contaminated clay is affected by oil content.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.611-622
• /
• 2007

In the design and construction of the coastal/offshore structures, it is very important to evaluate the geotechnical characteristics of marine soils, which support the structures. Although the offshore site investigation is much more difficult than onshore, safe and precise jobs have not been accomplished in Korea because of the insufficiency of the test equipments especially for the site with deep water depth. The main objective of this study is to develop a new type of marine cone penetration testing(CPT) system, which can be utilized to even deep sea and high depth of soil layer. The system is one of seabed types and employs the conventional cone, which shows more reliable results than miniature cone. The most important parts of the marine CPT including continuous rod system, cone penetration system with wheel drive, automatic cone rod assembly/dissembly system etc., were designed and manufactured. Some tests to verify the developed marine CPT system were performed at both onshore and offshore sites as well as mechanical test in laboratory. The test results show the consistent and promising performance of the new equipment, and thereafter the system would be applicable to various sites with practical/economical advantages.

• 한국지반공학회논문집
• /
• 제27권8호
• /
• pp.17-30
• /
• 2011

일반적으로 다양한 원위치 지반조사 방법들이 각 지반의 특성치 산출에 활용되고 있으나 토사지반과 암반지반의 중간 전이지반인 중간지반(IGM; Intermediate Geo-material)에 대한 그 방법들의 적용은 미비하거나 한계가 있다. 국외에서는 IGM지반에 대한 지반조사기술인 텍사스콘관입시험 (TCPT; Texas Cone Penetrometer Test)을 말뚝기초의 설계에 활용하고 있다. 본 연구에서는 국내 장비와 지반에 맞게 개량된 한국형 타격콘관입시험 (DCPT; Driving Cone Penetrometer Test)방법을 개발하였으며 이를 국내 지반에 적용한 결과를 다양한 원위치 지반조사 방법들과 비교 평가하고 관계를 분석하였다. 그 결과 DCPT와 SPT 결과와의 관계에서는 양호한 관계가 나타났으며 지반종류에 따른 DCPT의 특성치 범위도 적절하게 나타낼 수 있었다.