• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1666-1669
• /
• 2006

Plextronics develops conductive polymer technology (trademarked $Plexcore^{TM}$) that will enable the broad market commercialization of printed electronic devices. This talk will emphasize advances to our $Plexcore^{TM}$ HIL technology - a soluble non-acidic hole injection layer (HIL) technology for OLEDs . which is designed to dramatically improve device efficiency and lifetime of flat panel displays and solid state white-lighting.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.53-56
• /
• 1998

Polypyrrole (PPy) is regarded as one of the most Promising intrinsically or naturally conductive polymer for practical applications due to its relatively high electrical conductivity, environmental stability and low toxicity. The typical PPy, which is insoluble and infusible, exhibits poor processability and lacks essential mechanical properties. A number of papers have concerned the efforts to overcome these drawbacks. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.221-222
• /
• 2003

전도성 고분자(conductive polymer)는 범용 고분자에 비해 우수한 전기적 특성을 지니는 반면, 가공이 난이하다는 단점을 가진다. 이러한 전도성 고분자의 최대 단점인 가공성의 개선을 위한 방법으로는 새로운 전도성 고분자를 합성해 내거나 화학적 개질인 공중합(copolymerizaon)이 가능하고, 물리적인 접근법으로 블렌드와 복합재료화가 가능하다. 일반적으로 널리 쓰이는 것은 블렌드와 복합재료화를 통한 물리적 접근법인데 이는 기존의 물성을 그대로 가지면서도 제조가 비교적 용이하기 때문이다. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2010.03a
• /
• pp.108-108
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.20 no.8
• /
• pp.885-892
• /
• 1999

This communication describes the synthesis of : (i) non-toxic and low cost nanocrystalline electrode materials, which can be prepared advantageously at low temperature ; (ii) highly conductive electrolyte membranes formed by the nano-encapsulation within a poly(acrylonitrile)-based polymer matrix of a solution of LiPF6 in organic solvants. The performances of rechargeable PLR (Plastic Lithium Rechargeable) batteries using the above mentioned components are presented.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.468-474
• /
• 2015

Electrically conductive polymer nanocomposites were prepared by the inclusion of graphene-based nanofillers. Graphene oxide (GO) and reduced graphene oxide wrapped by poly(styrene sulfonate) (PSS-RGO) were used as nanofillers to make good dispersion with the aqueous dispersion of polystyrene (PS) particles. GO sheets were synthesized by the modified Hummers' method from graphite, and PSS-RGO sheets were prepared by the reduction of GO-dispersed PSS solution with hydrazine monohydrate. Morphology and properties of PS/GO and PS/PSS-RGO nanocomposites via latex technology were investigated. Both nanofillers showed well dispersed morphology in PS matrix. Rheological and electrical percolation thresholds were 0.28 and 0.51 wt% for GO, and 0.50 and 1.01 wt% for PSS-RGO respectively. It is speculated that PS/GO nanocomposites showed better conductivity than PS/PSS-RGO counterparts due to the partial recovery of GO by thermal reduction during molding.

• Journal of Electrochemical Science and Technology
• /
• v.6 no.3
• /
• pp.81-87
• /
• 2015

This study introduces a facile strategy to prepare metal oxide/conducting polymer nanocomposites that may have promising applications in energy storage devices. Ploy aniline/nano wire manganese dioxide (PANI/NwMnO₂) was synthesized by cyclic voltammetry on glassy carbon electrode. Morphology and structure of the composite, pure PANI, MnO₂ nanowires were fully characterized using XRD and SEM analysis. Electrochemical studies shows excellent synergistic effect between PANI and MnO₂ nanowires which results in its capacitance increase and cycle stability against PANI electrode. Specific capacitances of PANI/NwMnO₂ and PANI were 456 and 190 F/g respectively. The electrochemical performance of electrodes studied using cyclic voltammetry, Galvanostatic charge/discharge and impedance spectroscopy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.113-116
• /
• 2007

The fuel cell which converts directly chemical energy of fuel into electric energy has higher efficiency than the conventional power generation which involves several additional processes. Especially, polymer electrolyte membrane fuel cell (PEMFC) of which the electrolyte is a thin proton conductive polymer membrane is affordable for portable power applications and small-scale distributed power generation including household and small building. It is very important to not only increase the efficiency of FC itself but determine the optimal operation mode. The optimal operational planning of lkW household PEMFC system based on the daily electricity and heat demand patterns was performed. The estimated economic gain was up to 20% by adoption of PEMFC system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.261-264
• /
• 1997

Polyphenylenediamine(PPD)film was prepared with organo sulfur compond (2-aminothiophenol, 1,2-ethanedithiol, and 2-aminoethaneethiol etc.) adding lithium salt to increase the electrical conductivity of the polymer surface. The molecular structure of conductive polymer synthesized were examined and discussed by using SEM, FT-IR, NMR etc. The elecrical conductivity messurement were carried out with four-probe method at dry box of He and $N_2$atmosphere. The typical value of successful electrical conductivity was 1.2$\times$10$^1$S/cm at room temperature.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.83-84
• /
• 2006

In aqueous phase, we directly prepared conducting and photoluminescent nano-structured particles by oxidation polymerization. Thiophene(PT) was initiated by $FeCl_{3}/H_{2}O_{2}$ (catalyst/oxidant) combination system. And, polydispersed core-shell poly(styrene/thiophene) and polyaniline(PANI)-coated multi core-shell polystyrene latex particles were successfully prepared by oxidative and radical polymerization. The resulting latex particles have fine improved luminescence and conductive efficiency and dispersion state due to the PT and PANI shell. Hyper functionalized nanoparticle would be expected to increase the processibility in various electrical and electro-optical fields.