• Journal of the Korean Chemical Society
• /
• v.66 no.3
• /
• pp.209-217
• /
• 2022

We have developed photosensitive electrochromic smart windows that does not require any transparent conducting oxide (TCO) substrate. In our previous study, we demonstrated that a flexible film-type device made with a low temperature curing WO₃ sol and TiO₂ sol could show a reversible and rapid switching between colored and bleached state via incorporation of platinum catalysts on the surface of WO₃ layer. However, when these devices were exposed to sunlight over 4 hour, it was confirmed that they did not return to fully bleached state in the darkened state due to their overcoloring process. In this study, we added 4-hydroxy-(2,2,6,6-tetramethylpiperidin-1-yl)oxyl (TEMPOL) as an additive to the electrolyte of photosensitive electrochromic device to effectively prevent the undesired overcoloring process. The resulting device with TEMPOL indeed did not undergo excessive coloration and showed great reversibility even after being exposed to sunlight for over 4 hours. Various concentrations of TEMPOL were applied to compare changes in the visible transmittance and coloring/bleaching kinetics of devices. In terms of energetic point of view, we proposed a plausible mechanism of TEMPOL to prevent excessive coloration.

• Journal of Environmental Health Sciences
• /
• v.38 no.3
• /
• pp.184-194
• /
• 2012

Objectives: We investigated the effects of air pollution on allergic diseases (allergic rhinitis, asthma, atopic dermatitis) in metropolitan cities in Korea, adjusting for meteorological factors. Methods: Data on daily hospital visits and hospital admissions for 2003-2010 was obtained from the National Health Insurance Cooperation. Meteorological data was obtained from the Korea Meteorological Administration. We then calculated daily mean temperature, daily mean humidity, daily mean air pressure at sea level, and diurnal temperature range. We used data on air pollution provided by the National Institute of Environmental Research. Maximum daily eight-hour average ozone concentrations and the daily mean $PM_{10}$ were used. We estimated excess risk and 95% confidence interval for the increasing interquatile range (IQR) of each air pollutant using Generalized Additive Models (GAM) that appropriate for time series analysis. Results: In this study, we observed an association between ozone and hospital visits for allergic rhinitis, asthma, and atopic dermatitis in all metropolitan cities, adjusting for temperature, humidity, air pressure at sea level, diurnal temperature range, and day of the week. Ozone was associated with hospital visits for allergic rhinitis, asthma, and atopic dermatitis across all metropolitan cities. However $PM_{10}$ was associated with allergic-related diseases in only select cities. Also, ozone and $PM_{10}$ were associated with hospital admission for asthma in all cities except Gwangju. Hospitalization for the other diseases failed to show consistent association with air pollutants. Conclusion: In the findings of this study, there was a significant association between air pollutants and allergic-related diseases. More detailed research subdivided age group or conducting meta-analyses combining data of all cities is required.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.4
• /
• pp.21-32
• /
• 2008

The rural area has kept traditions and green open spaces highlighted in these days since the life quality elevated. Institute of Rural Resources Development has been conducting nation-wide survey project for rural amenity resources to construct the databases of rural amenity distribution and richness. Using surveyed data from the project, this study was implemented to evaluate rural amenity values based on SAW (Simple Additive Weighting) method considering two aspects including living and tourism amenity. For defining the set of evaluation criteria, the rural amenity resources were classified into almost intact nature resources(natural resources), interaction between nature and man resources(cultural resources) and man-made resources(social resources). The weighting values of the criteria were evaluated from the step wise pair-comparison results by AHP(Analytic Hierarchy Process) method. In the results of weighting values related to living amenity, social resources was the hightest ranked criterion (0.512), followed by cultural resources (0.245) and natural resources (0.243). On the other hand, the results related to tourism amenity was that weighting values of natural resources, cultural resources and social resources were 0.481, 0.340 and 0.179, respectively. The two aspects evaluation methods was applied to the selected 18 areas (Myeon administration level) in Chungcheongbuk Do. The results demonstrated the differences of amenity values for living conditions and tourism conditions and could be used for prioritizing rural amenity planning.

• The Korean Journal of Pain
• /
• v.12 no.1
• /
• pp.64-69
• /
• 1999

Background: The new drug HP228 is a cytokine restraining agent with a broad spectrum of anti-inflammatory, analgesic, and antipyretic activity. Six healthy, adult, male volunteers were studied to determine the independent and interactive effects of HP228 and morphine on pain perception. Methods: Two groups of stimuli were applied to each volunteers before drug administration as control, 20 min after morphine and HP228 administration, and 20 min after combined administration of these two drugs. Two adhesive electrically-conducting pads were applied on opposite sides of the arm approximately 8 cm apart. The electrode were connected to an electrical impulse generator and 50 Hz 1 msec pulses of incrementally increasing intensity were delivered at 1 sec intervals. The analgesic endpoints were the current intensity (mA) at which the subject first detected the stimulus (THRESH), the intensity at which the stimulus was first idenfied as being painful (PAIN), and the intensity at which the subject requested that the stimulus be terminated due to discomfort (LIMIT). A second series of stimuli were applied immediately thereafter using 1-sec duration 50 Hz tetanus pulses with increasing intensities at 2~5 sec intervals. Results: There were significant differences between drug treatments (Morphine, HP228, HP228/Morphine) and control (No drugs) in any of the measurements (PAIN, LIMIT) except THRESH with the twitch and tetanus test. Conclusions: The data suggests that HP228 is an analgesic, but it does not appear to interact with morphine in an additive manner.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.173-177
• /
• 2004

The acute toxicities of two major anti-pathogenic veterinary medicines, i.e., ciprofloxacin and enrofloxacin, and six benzimidazole anthelmintics, i.e., albendazole, thiabendazole, flubendazole, febantel, fenbendazole, and oxfendazole, were evaluated with a marine bacterium, Vibrio fischeri, and invertebrate Daphnia magna. These veterinary medical products have been widely used for farm animals, but their impact on aquatic fauna has seldom been investigated. In general, daphnids responded as much as 3 orders of magnitude more sensitively to the tested pharmaceuticals than the microbes. For Daphnia, the most toxic product among the tested anthelmintics was fenbendazole, followed by flubendazole > albendazole ${\approx}$ febantel > thiabendazole > oxfendazole. Daphnids' EC50 values obtained from 48 to 96 hrs of fenbendazole exposure ranged from 2.7 to 6.3 ug/L. The mixture toxicity of the test pharmaceuticals was generally additive in nature and was well predicted by a concentration addition model. Using the predicted no effect concentrations (PNECs) of the benzimidazole derivatives estimated from this study, and predicted environmental concentrations (PECs) of these pharmaceuticals, the risk quotients of each anthelmintics were calculated. Most of the test anthelmintic compounds resulted in risk quotients greater than 1. Especially, risk quotient for fenbendazole was 2,791, which strongly indicates this compound might cause severe ecological consequences, should no future action be taken. This study is the first report on the aquatic toxicities and potential ecological risk of major anthelmintic and antimicrobial veterinary products in Korea. The result of this study provides information necessary for conducting more detailed ecological risk assessment of pharmaceutical products in ambient water and guiding proper management decision.

• Korean journal of food and cookery science
• /
• v.18 no.5
• /
• pp.482-486
• /
• 2002

The effect of consumer education on food label was investigated by conducting a survey. The questionnaire had been collected from university students in Choongnam and Chungbuk province, and total 462 answers were collected and analyzed. Awareness and understanding of food label appeared to be improved by consumer education. Especially, the respondents showed a good understanding on food additive labeling after consumer education. However, most respondents misrecognize 'sell by date' as 'expiration date'. The results suggested the necessity of consumer education on the shelf life of foods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.271-274
• /
• 2000

Gas sensor materials capable of detecting hydrogen gases (H$_2$) or nitrogen oxides (NO$\_$x/, primarily NO and NO$_2$) with high sensitivity have attracted much interest in conjunction with the growing concern to the protection of global environments. Beside conventional sensor materials, such as semiconductors., conducting polymers and solid electrolytes, the potential of sensor materials with a new method for detecting hydrogen gases or nitrogen oxides gas has also been tested. The breakdown voltage of porous varistors shifted to a low electric field upon exposure to H$_2$ gas, whereas it shifted to a reverse direction in an atmosphere containing oxidizing gases such as O$_3$ and NO$_2$ in the temperature range of 300 to 600$^{\circ}C$. Furthermore, it was found that the magnitude of the breakdown voltage shift, i. e. the magnitude of sensitivity, was well correlated with gas concentration, and that the H$_2$ sensitivity was improved by controlling the composition of the Bi$_2$O$_3$ rich grain boundary phase. However, NO$\_$x/ sensing properties of porous varistors have not been studies in detail. The objective of the present study is to investigate the effect of the composition of the Bi$_2$O$_3$ rich grain boundary phase and other additive such as A1$_2$O$_3$ on the hydrogen gases (H$_2$) sensing properties of porous ZnO based varistors.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.104-114
• /
• 2007

This research entailed collecting domestic and overseas research papers on technologies for fermentation of Kimchi, which is widely considered the national dish of Korea, creating a technology classification structure and conducting quantitative analysis on each technology component and schematization. Five research papers were published in domestic journals in 1990. Afterwards, the number increased by six to nine papers a year. There was no clear increase after the year 2000, but an average of around 20 papers have been Published every year, indicating that Kimchi research is now becoming widespread. An analysis on researchers entailed determining the percentage of research papers published by the top ten authors. The percentage was 76% in the early-1990s; 63% in the late-1990s; and 52% in the 2000s, indicating that Kimchi has been more and more widely researched and Kimchi research has become professionalized. Universities were found to be leading the research as 52% of researchers belonged to universities. Another 9% were at research institutions. Analysis of technologies showed that domestic research mainly focused on the Kimchi fermentation process and an additive for the development of new Kimchi ingredients and types, preservation and quality improvements. Most of the research papers published overseas dealt with the functions of bacteria strains isolated from Kimchi; and improvements in the Kimchi fermentation and ripening processes. And most of the research papers have been published in a field of microorganism and biotechnology.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.47-55
• /
• 2020

Highly loaded LiCoO₂ positive electrodes are prepared to construct high-energy density lithium-ion batteries, their electrochemical performances are evaluated. For the standard electrode, a loading of about 2.2 mAh/㎠ is used, and for a high-loading electrode, an electrode is manufactured with a loading level of about 4.4 mAh/㎠. The content of carbon black as electronic conducting additive, and the porosity of the electrode are configured differently to compare the effects of electron conduction and ionic conduction in the highly loaded LiCoO₂ electrode. It is expected that the electrochemical performance is improved as the amount of the carbon black increases, but the specific capacity of the LiCoO₂ electrode containing 7.5 weight% carbon black is rather reduced. When the conductive material is excessively provided, an increase of electrode thickness by the low content of the LiCoO₂ active material in the same loading level of the electrode is predicted as a cause of polarization growth. When the electrode porosity increases, the path of ionic transport can be extended, but the electron conduction within the electrode is disadvantageous because the contact between the active material and the carbon black particles decreases. As the electrode porosity is lowered through the sufficient calendaring of the electrode, the electrochemical performance is improved because of the better contact between particles in the electrode and the reduced electrode thickness. In the electrode design for the high-loading, it is very important to construct the path of electron conduction as well as the ion transfer and to reduce the electrode thickness.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.125-133
• /
• 2017

KAERI is conducting research on spent cladding hulls and additive metals to generate a solidification host matrix for the noble metal fission product waste in anode sludge from the electro-refining process to minimize the volume of waste that needs to be disposed of. In this study, alloy compositions Zr-17Cr, Zr-22Cr, and Zr-27Cr were prepared with or without eight noble metals representing fuel waste using induction melting. The microstructures of the resulting alloys were characterized and electrochemical corrosion tests were conducted to evaluate their corrosion characteristics. All the compositions had better corrosion characteristics than other Zr-based alloys that were evaluated for comparison. Analysis of the leach solution after the corrosion test of the Zr-22Cr-8NM specimen indicated that the noble metals were not leached during corrosion under 500 mV imposed voltage, which simulates a highly oxidizing disposal environment. The results of this study confirm that Zr-Cr based compositions will likely serve as chemically stable waste forms.