• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.1
• /
• pp.28-34
• /
• 1998

This paper introduced the thermal characteristics of Moss Rosenberg Verft spherical tank type LNG Carrier. Especially described the temperature variation during cooling down condition. It is not easy task to calculate the temperature variation because of unsteady state condition. In this paper, computer simulation program is developed by using a Tomas Algorithm on unsteady state condition and compared with calculation results and experimental results on existing LNG Carrier voyage.

• International journal of advanced smart convergence
• /
• v.3 no.1
• /
• pp.20-24
• /
• 2014

To compare body signal, was designed the F-B function system on the body movement for the comfortable state. To detect subject of the normal state, was decided on the base of physical signal in the body movement. There are to detect the condition of Vision, Vestibular, Somatosensory and CNS. Vision condition was verified a variation of greater average (Vi-${\Phi}_{AVG-AVG}$) was presented slightly greater at $17.424{\pm}9.65$ unit. Vestibular condition was identified a variation of slightly greater average (Ve-${\Phi}_{AVG-AVG}$) was presented at $9.068{\pm}1.478$ unit. Somatosensory condition was checked a variation of smaller average (So-${\Phi}_{AVG-AVG}$) was presented slightly smaller at $2.79{\pm}0.419$ unit. CNS condition was confirmed a variation of diminutive smaller average (C-${\Phi}_{AVG-AVG}$) was presented slightly larger at $0.557{\pm}0.153$ unit. As the model depends on the F-B function system of body movement, average values of these perturbation were computed F-B function comparison data. These systems will be to infer a data algorithm and a data signal processing system for the evaluation of the stability.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.725-733
• /
• 2001

In this study, variation of effluent of residual chlorine concentration was estimated from bench scale distribution reservoir test according to variation of flow and baffle condition. According to the bench scale test results, when the flow rate was an unsteady state, difference between the case of no-baffle in the reservoir and the case of two-baffles in the reservoir became less than the condition when the effluent flow was in a steady state. Consequently, the results are caused by the flow rate variation. Thus, the baffle is less effective than a clearwell of steady state condition.

• International journal of advanced smart convergence
• /
• v.3 no.1
• /
• pp.15-19
• /
• 2014

This study was compared the variation system of body posture condition for stability by the posture. We used a model of bio parameter on the basis of the move state in the standing posture. We compared the sway movement derived from average of the physical sensing condition. Vision condition of variation average (Vi-${\sigma}_{AVG-AVG}$) was verified slightly greater at $13.746{\pm}4.05$ unit. Vestibular condition of variation average (Ve-${\sigma}_{AVG-AVG}$) was verified slightly larger at $7.829{\pm}1.071$ unit. Somatosensory condition of variation average (So-${\sigma}_{AVG-AVG}$) was verified slightly smaller at $2.592{\pm}0.538$ unit. CNS condition of variation average (C-${\sigma}_{AVG-AVG}$) was verified slightly larger at $0.46{\pm}0.105$ unit. The valuation system will be to deduce the model of body management with falling and stroke and all that sort of things. There will be to infer a data algorithm and the evaluation of processing system.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.25-28
• /
• 1987

Design procedure of adaptive controller with variable load condition is present and applied to velocity control of small, permanent magnet DC servo motor. The state feedback control scheme is adopted and Recursive Least Squares algorithm is used for parameter estimation. In order to reduce the time consuming. In the procedure of adaptation-gain tuning of state feedback controller, approximate curve fitting technique is applied to the relations between load condition and poles of the system, load condition and feedback gains. With this method, fast adaptation can be accomplished. It is shown that this procedure can be applied not only to variable load condition but also to variation of other system constants, for example variation of resistance and inductance etc.. Simulation results is present for both cases - variable inertia load, variable motor resistance to verify performance improvements. This design procedure produces an adaptive con troller which is feasible for implementation with microprocessor by reducing calculation time.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.8
• /
• pp.899-905
• /
• 1988

In this paper, we suggest a new quasi-sliding mode condition with a wighting factor which guarantees all the states to reach switching planes and improves the convergence of the state trajectories. The result of computer simulation shows that by the suitable selection of a weighting factor, all the state trajectories reach switching planes and enter the sliding mode having the property of the insensitivity to parameter variation and disturbances.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.70-75
• /
• 2009

In this experiment, we did sampling 6 kinds of photovoltaic modules and analyzed the discrepancy of measurement results between l laboratory and 4 PV makers to have performance repeatability at Standard Test Condition(STC) condition. From the KIER's results, Korea's standard test laboratory, other laboratory showed -10% measurement variation. The causes came from correction of reference cell, test condition and the state of skill. Form the comparison test, we analyzed the problems. But three PV maker reduced measurement variation, other one PV maker and one test laboratory didn't improve the problems of correction of reference cell, test condition and the state of skill. Also, High Efficiency Module had a big discrepancy of -10.0$\sim$-6.2% among 3 laboratories which have a less than 10msec light pulse duration time. This made low spectrum response speed so the Fill Factor decreased maximum output power under 10msec light pulse duration time

• Smart Structures and Systems
• /
• v.2 no.4
• /
• pp.357-363
• /
• 2006

Equations describing deformation defects, damage accumulation, and fracture condition have been suggested. Analytical and numerical solutions have been obtained for defects produced by a shear in a fixed direction. Under cyclic loading the number of cycles to failure well fits the empirical Koffin-Manson law. The developed model is expanded to the case of the micro-plastic deformation, which accompanies martensite accommodation in shape memory alloys. Damage of a shape memory specimen has been calculated for two regimes of loading: a constant stress and cyclic variation of temperature across the interval of martensitic transformations, and at a constant temperature corresponding to the pseudoelastic state and cyclic variation of stress. The obtained results are in a good qualitative agreement with available experimental data.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.6
• /
• pp.373-380
• /
• 2018

This study proposes a new islanding detection method that uses the phase shift of feed-forward voltage and evaluates the performance of an existing method and the proposed method when the grid frequency changes within the allowable range under steady-state conditions. The investigated existing method, which is slip mode frequency shift (SMS), uses current phase shift to detect islanding. The SMS method supplies reactive current to the grid under this condition, but the proposed method does not generate additional reactive power because it does not depend on the current control loop. The performance in steady-state grid condition is evaluated through simulations and experiments.

• Journal of Welding and Joining
• /
• v.15 no.6
• /
• pp.32-40
• /
• 1997

Solid state diffusion bonding is the joining process performed by creep and diffusion, which is accelerated by heating below melting temperature and proper pressing, in vacuum or shielding gas atmosphere. By this process we can obtain sufficient joint which can't be expected from the fusion welding. For Ti-6Al-4V alloy, the optimum solid state diffusion bonding condition and mechanical properties of the joint were found, and micro void morphology at bond interface was observed by SEM. The results of tensile test showed sufficient joint, whose mechanical properties are similar to that of base metal. 850$^{\circ}$C, 3MPa is considered as the optimum bonding condition. Void morphology at interface is long and flat at the initial stage. As the percentage of bonded area increases, however, small and round voids are found. Variation of void shape can be explained as follows. As for the void shrinkage mechanism, at the initial stage, power law creep is the dominant, but diffusion mechanism is dominant when the percentage of bonded area is increased.