• Journal of Industrial Technology
• /
• v.17
• /
• pp.87-93
• /
• 1997

A Special purpose program, based on the dimensional analysis, was developed to estimate the wide band turbulent noise in the blower of vehicle airhandling system. Acoustic power level was measured at 4 rating points around the operating condition. The experiment was performed on the reference blower model using international standard chamber, which could measure acoustic power according to the air-handling performance. Analytical model of the blower noise was determined by the measured data. Using the analytical acoustic model, it was possible to estimated the effect by the change of the operating condition, such as flow rate, static pressure and wheel rotating speed, furthermore, the diameter and the width of blower.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.971-976
• /
• 2011

This paper proposes a test system for a valve and poles building blocks used for large scale inverters such as STATCOM, SSSC, UPFC and VSC HVDC. Power semiconductors in the valve are normally connected in series to withstand switching voltage much larger than the voltage rating of a single power semiconductor. Therefore, there is a need to verify if the dynamic voltage sharing during switching in a valve is satisfactory. In this paper, we propose a test system that provides the necessary test condition: voltage and current in the valve using resonant circuits. A test scheme for a single phase inverter consisting two poles is also proposed. The performance of the inverter pole has to be verified at the factory test, before the system is installed at the site to secure the reliability of the system. The proposed scheme makes it possible to confirm if the pole can withstand voltage and current switching condition and handle loss.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.4
• /
• pp.33-38
• /
• 1994

Floating-type automatic turnout was developed for the purpose of reducing labor cost and labor-working hours related to turnout management. The point of automation is to use a flexible-float within the turnout. The weight of float is changed by emptying and filling with water at the beginning and ending of irrigation. The turnout is controlled to open and close small bole on the float bottom using electromagnets. With the weight control of float. the gate of turnout is opened by the empty float to begin irrigatiom and is closed by the filled float to stop irrigation. The turnout was designed to be operated by the main computer and to minimize electric power consumption by sending an electric current at the beginning and ending of irrigation. The functional experiment was succesfully carried out and the rating curves for both free overflow condition and submerged flow condition were derived.

• Journal of Construction Engineering and Project Management
• /
• v.1 no.2
• /
• pp.1-10
• /
• 2011

Bridges are critical and valuable components in any road and rail transportation network. Therefore bridge remediation has always been a top priority for asset managers and engineers, but identifying the nature of true defect deterioration and associated remediation treatments remains a complex task. Nowadays Decision Support Systems (DSS) are widely used to assist decision makers across an extensive spectrum of unstructured decision environments. The main objective of this research is to develop a requirements-driven methodology for bridge monitoring and maintenance which has the ability to assess the bridge condition and find the best remediation treatments using Simple Multi Attribute Rating Technique (SMART); with the aim of maintaining a bridge within acceptable limits of safety, serviceability and sustainability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.450-454
• /
• 2001

The aim of the study is to develope an objective index for the evaluation of vehicle ride comfort using the measured vehicle accelerations. The equation of the index was derived from the correlation analysis of subjective ratings on selected vehicles and the reduced measure of the vehicle motions. First whole procedure of from the measurements to the calculation of the perceptual vibration was developed. Test condition of both the vehicle speed and the road condition was selected so as to maximize the reliability of the index. This paper suggested the equation of the objective ride index on vibration harshness, of which expected error is about 0.3 in 10 scale of subjective rating at 95％ of the significance level.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.763-770
• /
• 1998

This paper deals with evaluation of bending fatigue strength in SCM415 carburized spur gears. The constant stress amplitude fatigue test is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and the enhanvement of fatigue strength due to carburized treatment is clarified. In this study the improvement of fatigue strength is assumed to be caused by an increase of both hardness and residual stress and experimental formula has been proposed for the estimation of bending fatigue strength of carburized gears. The effect of surface conditions on the fatigue strength is evaluated quantitatively and it is close to the relative surface condition factor used in the ISO strength rating formula.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.26-35
• /
• 2010

The maximum output torque developed by the machine is dependent on the allowable current rating and maximum voltage that the inverter can supply to the machine. Therefore, to use the inverter capacity fully, it is desirable to use the control scheme considering the voltage and current limit condition, which can yield the maximum torque per ampere over the entire speed range. This controller is controlled speed and current using hybrid PI(HBPI) controller and estimation of speed using ANN. Also, this paper is proposed maximum torque control of induction motor using slip angular speed and current condition at widely speed range. The performance of the proposed induction motor drive with maximum torque control using HBPI controller is verified by analysis results at dynamic operation conditions.

• Journal of Sasang Constitutional Medicine
• /
• v.34 no.4
• /
• pp.81-88
• /
• 2022

Objectives The purpose of this case study is to report the improvement of hand foot and mouth disease after using Galgeunhaegi-tang Methods A Taeumin patient suffering from painful hand foot and mouth disease was treated with herb medicine Galgeunhaegi-tang, acupuncture and cupping therapy. Rhei radix et rhizoma was added or removed from herb medicine according to patient's stool condition. Severity of pain and general symptom was measured using Numerical Rating Scale(NRS), and the picture of patient's hand and foot was taken. Results & Conclusions After taking Galgeunhaegi-tang, symptoms including pain, rash, blisters, and general conditions improved as patient's stool condition improved from constipation to normal. In conclusion, this case report shows that Galgeunhaegi-tang can be effective to Taeumin hand foot and mouth disease patients.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6711-6714
• /
• 2015

Background: Insomnia is a common condition in cancer patients. In spite of the high prevalence its associations have not been well studied. Existing data suggests that insomnia is related to depression and pain. However, the impact of ongoing chemotherapy on sleep is not investigated. Aim: To study the relationship between insomnia and chemotherapy after analysing confounding variables. Materials and Methods: Consecutive patients who visited New England Oncology Clinic in Tamworth were recruited. Insomnia was assessed with the Bergen insomnia scale. The Montgomery Asberg Depression rating scale was used to measure depression. Pain was assessed with the Brief Pain inventory. Chronic medical conditions, type of cancer, side effects to chemotherapy, role of steroids and other drugs were studied as confounders. Results: A total of 56 patients participated in the study. Age ranged from 33 to 83 years (mean: 63.6, SD=10.97). There were 29 men and 27 women. 42 patients received at least one form of chemotherapy and 15 were receiving radiotherapy at the time of assessment. Mean insomnia score was significantly higher in those receiving chemotherapy than in those without chemotherapy (8.92 vs 17.2, two tailed p=0.005, 95% CI=2.63-13.71). There was no significant variation in insomnia scores in terms of chronic medical condition, type of cancer, psychiatric history, use of steroids or adverse effects of chemotherapy. However, total insomnia score was correlated with depression rating score (Pearson correlation, r=0.39, p=0.003) and magnitude of pain (r=0.37, p=0.006). On regression analysis only pain was found to be predictive of insomnia. Conclusions: Insomnia in patients with cancer is found to be associated with concurrent chemotherapy and correlated with degree of depression and pain. Identifying factors related to insomnia in cancer population has implications in its management and patient education.

• Korean Journal of Schizophrenia Research
• /
• v.17 no.1
• /
• pp.36-42
• /
• 2014

Objectives : The dysfunctional neural networks underlying self-evaluation in schizophrenia are overlapped with the neural structures involved in emotion regulation. The purpose of this study was to investigate the influence of anhedonia on the self-evaluation attitude of patients with schizophrenia. Methods : Twenty healthy controls and twenty patients with schizophrenia performed a self-evaluation task, presenting a pair of the face (self, familiar other, and unfamiliar other) and word (negative, neutral, and positive noun) at the same time. Participants were asked to evaluate relevance between the pairs by pressing a corresponding button. Relevance rating scores were compared between the groups and were correlated with the severity of physical and social anhedonia. Results : Patients evaluated the condition of a self face with a negative word and a familiar face with a negative word to be more relevant than healthy controls. In the patient group, the scores of relevance rating in the condition of an unfamiliar other face with a negative word were positively correlated with the anhedonia scale scores (physical : r=0.486, p=0.030 ; social : r=0.499, p=0.025). There was no correlation between the self-evaluation attitude and the severity of anhedonia. Conclusion : Patients with schizophrenia evaluate themselves badly in only negative circumstances, and anhedonia is not related to self-evaluation, but rather other-evaluation.