• Journal of Korean Association for Spatial Structures
• /
• v.12 no.4
• /
• pp.91-98
• /
• 2012

As the occurrence rate of terror and hazard is increasing throughout the world, GSA, DoD, and FEMA are proceeding a study about mitigating the damage of terror. Korea is no more a safe place from the terrorist's threat, so we need to make measures against them. In this study we developed modified RVS System by revising some items to adjust the system to the domestic condition and conducted a risk assessment on several tall buildings in Korea. By using IRVS system which is developed by DHS, we also carried out the risk assessment. Comparing the results between RVS with IRVS, we performed terror risk evaluation of tall buildings. Through risk assessment of several tall buildings, we analyzed key factors of each scenarios and suggested the mean value of each items, so we would like to help the counter-terrorism in the design phase.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.37-47
• /
• 2017

Climate change has often resulted in severe droughts in a rice-farming season (i.e., April to June), and the large amount of water resources were needed to cope with droughts during the season. Therefore, the subsurface dam, which is able to store groundwater resources in the alluvium aquifer, has been considered to be an alternative for securing more groundwater resources. In this study, suitable sites assessment criteria for agricultural subsurface dam using analytic hierarchy process (AHP) were established for adequate drought management. Moreover, the criteria were applied to the existing five agricultural subsurface dams to verify their applicability of groundwater supply for each subsurface dam. The assessment criteria were divided into three major categories (geology, hydrology and business condition) and classified to 12 individual sub-categories with weighting. From the assessment, Ian subsurface dam and Wooil subsurface dam were identified as the best and the worst suitable site, respectively, and this result was in accordance with the average amount of annual groundwater supply by each subsurface dam during the period of 2011-2017.

• Journal of Environmental Impact Assessment
• /
• v.31 no.6
• /
• pp.378-387
• /
• 2022

Since air pollution has become a global issue to be managed, the Republic of Korea (ROC) is protecting air quality by predicting the air condition before a construction project starts through EnvironmentalImpact Assessment (EIA) and measuring the air condition afterwards the construction project ends through Post-environmental Impact Assessment (PEIA). The aim of this study consists on verifying the predicted and measured concentration data and analyzing their consistency in order to deduce improvement directions. Linear EIA projects which the investigation during operation period have been concluded between years 2017 and 2019 were used. As a result, the following improvement directions were suggested: reduction of EIA air quality standards, strengthen the management of projects with construction duration longer than 5 years, incorporation of first or second quarter (winter or spring) into the investigation period, consideration of construction equipment or conditions for better prediction. The strength of this study is that we arranged and utilized EIA predicted and PEIA measured data to understand the present EIA procedure and made meaningful suggestions through the consistency analysis contributing to air quality maintenance and investigation methodology enhancement.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2392-2395
• /
• 1999

This paper describes to access the insulation deterioration condition of the stator windings in six high voltage motors. Nondestructive tests have been carried out on stand-still motors. These tests include ac current increase rate($\Delta$I), delta tan delta(${\Delta}tan{\delta}$), and maximum partial discharge(PD). AC current and $tan{\delta}$ were measured by Schering bridge. The measurement of PD patterns were conducted using digital partial discharge detector. PD patterns were observed treeing and internal discharges in Motor 1 and 2. The stator windings of two motors were found to be in a poor condition and their were recommended to rewind. The stator. windings of four motors were judged to be in serviceable condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.499-502
• /
• 2004

In order to detect of insulation problems an early, transformer has to be performed the several tests. The ac current and tan6 of transformer winding insulation were investigated by Schering bridge. Partial discharge(PD) tests are used to evaluate the insulation condition of transformer. The moisture content measurement was conducted using RVM(recovery voltage meter). The RVM test can show that the problem is affecting the paper insulation of transformer. The value of moisture content was 2.3% in main transformer. The insulations of four transformers were judged to be in good condition.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2011

A questionnaire study was carried out to understand the status of performing the risk assessment of work-related musculoskeletal disorders(WMDSs), which is the employers' legal responsibility when the employees are involved in doing tasks with risk factors. Employers or managers from 340 companies and the representative employees from 250 companies participated in the survey. According to the participated employers and employees, 35.0~46.2% of companies had performed the first risk assessment before the end of 2005. However, it is presumed that the real condition might not be as much as the result, because most companies were very reluctant to took part in the survey. It was found that the type of business and size of the company are the main factors affecting the performance of the risk assessment in terms of the performing ratio, method, and so on. The participants were positive in the thought that the assessment would be helpful in preventing msuculoskeletal disorders, while there was a little difference between the employers and employees in the thought that the assessment would be helpful in finding the injuries in the early stage. It was found that it is necessary to modify and improve the definition and criteria of the tasks to be examined in the assessment.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2737-2742
• /
• 2007

Strong wind flow around a building complex was numerically studied by LES. The original motivation of this work stemmed from the efforts to develop a risk assessment technique for windstorm hazards. Lagrangian-averaged scale-invariant dynamic subgrid-scale model was used for turbulence modeling, and a log-law-based wall model was employed on all the solid surfaces including the ground and the surface of buildings to replace the no-slip condition. The shape of buildings was implemented on the Cartesian grid system by an immersed boundary method. Key flow quantities for the risk assessment such as mean and RMS values of pressure on the surface of the selected buildings are presented. In addition, characteristics of the velocity field at some selected locations vital to safety of human beings is also reported.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.55-61
• /
• 2013

In this paper, ship accidents are analyzed briefly and the main objective is to investigate a potential technological approach for risk assessment of vessel stability. Ship nonlinear motion equation and main parameters that induce ship capsizing in beam seas have analyzed, the survival probability of a ferry in random status have estimated and finally find out a risk assessment concept for ship's intact stability estimation by safe basin simulation method. Since a few main parameters are considered in the paper, it is expected to be more accurately for estimating ship survival probability when considering ship rolling initial condition and all other impact parameters in the future research.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.628-630
• /
• 2003

Synthetic Aperture Radar(SAR) is an active microwave instrument that performs high-resolution observation under almost all weather condition. Research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. In fact, many complicated steps are involved in order to generate a SAR image product. The purpose of this paper is to derive quality assessment procedures and define important test parameters in each procedure inside a SAR processor. Thus those test parameter values indicate the quality of SAR image products and verify the processor's performance. Moreover, required procedures to correct and handle errors which are indicated during the assessment are also presented.