• Journal of the Korean Society of Radiology
• /
• v.10 no.7
• /
• pp.551-557
• /
• 2016

National competency standards, which are the contents of the knowledge, skills and attitudes required to perform a job in industry, is organized by the country. the job performance was evaluated based on the National competency standards from the third-year grade of radiology students by using field-based training courses. according to the evaluation results, students showed over 93% satisfactory ratio of job performance in all radiography projection methods. Therefore, it can be predicted that field-based training courses for students made a positive effect on improving their job performance. Exposure methods with CR equipment were evaluated the best rating, yet it has various problems. The standard deviation between students was very high, and the CR operation skill of students was insufficient. Film methods was evaluated also showed problems, due to the exposure condition setting and developing operation. although DR method was rated good to the students, it was evaluated that the operation skill of DR and the ancillary equipment operation skill was shortage. By supplementing the evaluation factors below proficiency levels to a course management in each exposure method, it could help students course achievement. Also, it could help students to improve job performance of clinical areas after graduation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.173-180
• /
• 1987

Symptom development and disease severity of Phytophthora blight in the sesame plants varied depending upon age of the plants tested, inoculation method, watering method, and inoculum density in both susceptible Suweon 9 and Suweon 26 and moderately resistant B-67 and IS 103 sesame lines to Phytophthora nicotianae var. parasitica when inoculated. However, successful differentiation of the sesame lines for varietal resistance was possible using 20-day old seedling, inoculation by soil infestation, saturated soil water condition by half immersion of pots in water tank, and 200 sporangia per one ml of inoculum. Spraying or soil inoculation to 70-day old plants also was effective in differentiating the varietal resistance. By the screening method Suwon 26 showed 100％ diseased plants and symptom severity index 9.0, while B-67 showed 20% diseased plants and symptom severity index 1.7. The rating scale given was from 0 through 9. For example, the scale 0 signified no symptom development, 5 signified discoloration of basal part of stem, and 9 signified discoloration of stem more than 10 cm high above the soil surface with blighted leaves. Differentiation in symptom severity also was made by percentage of the lesion area. Results evaluated using both parameters were well corresponded in varietal reaction of sesame to Phytophthora blight.

• Culinary science and hospitality research
• /
• v.18 no.4
• /
• pp.59-69
• /
• 2012

This study examines the role of mathematics anxiety as a mediator between self efficacy and mathematics skills using a series of regression analyses suggested by Baron RM & Kenny DA(1986). The participants include college students who enrolled in the Food Service Production and Operation course in a department of hotel and restaurant management at a college in the United States. Descriptive analysis, principal component analysis, reliability test, and a series of regression analyses were used for data analysis using SPSS 19.0. In order to collect data for the study, General Self Efficacy Scale(GSES) and Math Anxiety Rating Scale(MARS) were utilized, and they turned out to be reliable(${\alpha}$=.906 and ${\alpha}$=.890, respectively). A significant negative relationship was found between self efficacy and mathematics anxiety. In addition, it was found that self-efficacious students performed better mathematics skills than those who had lower level of self efficacy. However, the relationship was no longer significant when the concept of mathematics anxiety was added, which satisfies the condition of mediation.

• Journal of the Korean Dietetic Association
• /
• v.12 no.1
• /
• pp.55-67
• /
• 2006

The purpose of this study was to compare the food behavior and nutrient intakes, and the analysis of constituent parts of blood related to iron nutrition conditions and to investigate the correlation between iron nutrition conditions and obesity. Each subject was assigned to one of such as normal(n=55) and obese groups(n=60) according to their obesity index. Their nutritional status, serum iron status were evaluated based in 24-hr dietary recalls, questionnaire and blood analysis. The mean age of the normal group(10.76 years) and that of the obese group(10.95 years) made little difference. The height(p<0.05), weight(p<0.001), and obesity index(p<0.001) in the obese group were higher than those of the normal group in every respect. The 63.55% of the subject of this study gave an answer 'They eat breakfast daily', and the frequency of eating breakfast made little difference. The average intakes of energy were 1669.44 kcal(84.19% of EER) in the obese group and 1673.59 kcal(86.72% of EER) in the normal group respectively, which made little difference between two groups. The intake of nutrients such as calcium and folate was as insufficient as below 75% of RI. The heme iron intake of the obese group was low that of the normal group(p<0.05). Among the major 20 iron resources the iron intake through animal food intake were 1.43 mg(12.00%) in the obese group and 1.93 mg(17.72%) in the normal group respectively. The rating of iron condition in the blood showed that the number of red blood cell(p<0.01), the hemoglobin(p<0.001), and hematocrit(p<0.01) of the obese group were lower than those of the normal group. These results suggest that there should be the right choice of food according to its bioavailability and nutritive guidance to appropriate food behavior, in addition to increasing iron intake to improve iron nutrition conditions of obese male elementary school students.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.29-43
• /
• 2015

Objective: The aim of this study is to develop management guidelines and a procedure for an anthropometric suitability assessment of the main control room (MCR) in nuclear power plants (NPPs). Background: The condition of the MCR should be suitable for the work crews in NPPs. The suitability of the MCR depends closely on the anthropometric dimensions and ergonomic factors of the users. In particular, the MCR workspace design in NPPs is important due to the close relationship with operating crews and their work failures. Many documents and criteria have recommended that anthropometry dimensions and their studies are one of the foremost processes of the MCR design in NPPs. If these factors are not properly considered, users can feel burdened about their work and the human errors that might occur. Method: The procedure for the anthropometric suitability assessment consists of 5 phases: 1) selection of the anthropometric suitability evaluation dimensions, 2) establishment of a measurement method according to the evaluation dimensions, 3) establishment of criteria for suitability evaluation dimensions, 4) establishment of rating scale and improvement methods according to the evaluation dimensions, and 5) assessment of the final grade for evaluation dimensions. The management guidelines for an anthropometric suitability assessment were completed using 10 factors: 1) director, 2) subject, 3) evaluation period, 4) measurement method and criteria, 5) selection of equipment, 6) measurement and evaluation, 7) suitability evaluation, 8) data sharing, 9) data storage, and 10) management according to the suitability grade. Results: We propose a set of 17 anthropometric dimensions for the size, cognition/perception action/behavior, and their relationships with human errors regarding the MCR design variables through a case study. The 17 selected dimensions are height, sitting height, eye height from floor, eye height above seat, arm length, functional reach, extended functional reach, radius reach, visual field, peripheral perception, hyperopia/myopia/astigmatism, color blindness, auditory acuity, finger dexterity, hand function, body angle, and manual muscle test. We proposed criteria on these 17 anthropometric dimensions for a suitability evaluation and suggested an improvement method according to the evaluation dimensions. Conclusion: The results of this study can improve the human performance of the crew in an MCR. These management guidelines and a procedure for an anthropometric suitability assessment will be able to prevent human errors due to inadequate anthropometric dimensions. Application: The proposed set of anthropometric dimensions can be integrated into a managerial index for the anthropometric suitability of the operating crews for more careful countermeasures to human errors in NPPs.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.61-71
• /
• 2010

The attributes related to the health condition of RC deck slabs are analyzed to help us identify and rate the safety level of the bridges in this study. According to the related reports the state assessment for the outward aspects of bridges is the important and critical part for rating the overall structural safety. In this respect, the careful identification for the various state attributes make the field inspection and structural diagnosis very effective. This study analyzes the influence of the state attributes on evaluation classes and the relationship of them by the inductive reasoning, which raise the understanding and performance for evaluation work, and support the logical approach for the state assessment. ID3 algorithm applied to the case set which is constructed from the field reports indicates the main attributes and the precedence governing the assessment, and derives the decision hierarchy for the state assessment.

• Korean Parent-Child Health Journal
• /
• v.9 no.1
• /
• pp.3-16
• /
• 2006

Purpose: The purpose of this study was to provide basic data for hospitalized children under the condition of painful procedure. Method: The data were collected from July 15th to Oct 30, 2003 from 68 hospitalized children suffer from acute disease, 68 mothers take care of children, 14 pediatric ward nurses. To evaluate the degree of pain perception of children, mothers & nurses, face pain rating scale and behavior characteristic were used. Result: The result were as follows. 1) The pain perception score of children, mothers & nurses. child perceived highest as the score of 3.60 2) The most frequent behavioral characteristic children were 'crying(47.1%)' mothers were 'soothing the child(54.4%)' and nurses were 'support not to move(52.9%)' 3) The degree of pain perception of children, mothers and nurses according to subjects' general characteristics and painful procedure, there were stastical difference according to children's age, mothers age and duration of painful procedure 4) There were significant correlation between the degree of pain perception and behavioral characteristics of children, mothers & nurses. Conclusion: Nurses should not underestimate children's pain and need to provide knowledge and information to the child and their parents regarding painful procedure.

• Korean Journal of Psychosomatic Medicine
• /
• v.3 no.2
• /
• pp.115-125
• /
• 1995

Reports about the prevalence of premenstrual symptoms state that occurs in 20 to 100% of most reproductive-age women. There is a close association between premenstrual syndrome and affective disorders as well as same some other psychiatric disorders. Late luteal phase dysphoric disorder (LLPDD) is a premenstrual condition defined in DSM-III-R by severe mood changes and other symptoms that repeatedly occur only in the luteal phase of the menstrual cycle. However, DSM-III-R does not specify how to compute the change from the follicular to the luteal phase or how to determine when the amount of change is great enough to warrant the diagnosis nor how to determine occupational or social functional impairment. This study was conducted to evaluate the nature, severity and magnitude of premenstrual syndrome in women with current psychiatric disorders by using prospective Daily Rating Form(DRF), and to measure symptom changes according to three scoring methods for diagnosing LLPDD. Our study obtains the data about premenstrual changes estimated by DRF from 22 women with psychiatric disorders who had met criteria for major depressive syndrome on the Premenstrual Assessment Form (PAF). The data was scored by each three methods and was determined to meet criteria A for LLPDD. The results are as follows: 1) the subjects, when scored according to the percent change method, effect size method and absolute severity method, met the DSM-III-R criteria A for LLPDD in 36.4% (8 subjects), 14% (3 subjects) and 4.5% (1 subject) of the cases respectively. 2) The items of irritability, anger and impatience were occurred most frequently on the DRF, when it was scored according to the three scoring methods. And the item of breast pain was next frequent according to the effect size method and the percent change method but according to the absolute severity method. 3) The PAF item of impaired social functioning was reported by 16 (73%) of the subjects. 4) 4 (18%) of the subjects met criteria A for LLPDD and reported impaired social functioning. The prevalency of LLPDD according to each method varied. The percent change method yielded the greatest (36.4%), and the absolute seventy method yielded the laest (4.5%), The effect size method yielded an intermediate frequency (14%). Therefore, for maximizing the diagnostic accuracy of LLPDD, a diagnostic procedure including a measure of change (e.q., effect size method, percent change method) as well as confirmed diagnosis by DRF, will be needed. Also, an accurate tool to evaluate impaired social functioning will be required.

• Tunnel and Underground Space
• /
• v.16 no.3 s.62
• /
• pp.251-258
• /
• 2006

In this paper, the applicability to the Korean rock condition of using the deformation moduli based on Rock Mass Rating (RMR) and Pressuremeter Test (PMT) is evaluated. The correlations among deformation moduli and various rock properties were also analyzed. It appears that the existing correlations using RMR overestimate the deformation moduli and wide variation was found between predicted moduli using these correlations and measured values. As for the correlations among the deformation moduli and various rock properties, Rock Quality Designation (RQD) and unconfined compressive strength (UCS) were found to correlate to deformation moduli reasonably well, but joint spacing and joint conditions appear to correlate poorly to RQD and UCS. Additionally, groundwater can not be correlated with the modulus values. While the depth has very little contribution to deformation modulus, it should be factored in the simple regression analyses with various rock mass properties, especially with the correlations made with UCS, RQD etc. With the deficiencies of these correlations, more in depth analysis techniques such as multivariate correlations may be to reliably estimate deformation modulus of rock mass.

• Fire Science and Engineering
• /
• v.19 no.4 s.60
• /
• pp.75-79
• /
• 2005

This study has developed Forest Fire Occurrence Danger Index (FFODI) using fuel and topographical characteristics for the practical purposes of forecasting forest fire occurrence danger rating. This was made on the basis of the 126 forest fire site according to field survey. The result of fire frequency analysis showed 87 sites on conifer $(69\%)$, 21 on mixed $(16.7\%)$ and 18 $(14.3\%)$ on non-conifer. The scale for Fuel Model Index(FMI) ranges from 1 to 10 and Topography Model Index(TMI) from 1 to 5. FMI is 10 on the conifer, 3 on the mixed and 2 on the non-conifer. In case of topographical analysis, it was estimated that 90 site $(71.4\%)$ of ignition point was bottom foot hill and 22 site $(17.5\%)$ was on the southwest. TMI in southwest direction is 5.0, 4.5 in the northwest and the northeast, 4.0 in the southeast and the south, 2.5 in the north and the west and 1.5 in the east. TMI in the bottom foot hill is 5 in the bottom foot hill, 1.5 in the upper foot hill, 1.0 in the bottom middle slope and 0.5 in the upper middle slope and bottom ridge.