• 한국토양비료학회지
• /
• 제37권2호
• /
• pp.124-130
• /
• 2004

Lysine을 추출한 후 발생되는 농축당밀용액 (CMS)을 포장용수량의 60-70%인 수분불포화토양과 시용량을 달리하여 혼화처리한 후 $25^{\circ}C$의 항온조건에서 7주 동안 항온배양하면서 토양의 이화학성, 질소의 무기화 및 미생물상의 변화를 조사하였다. CMS를 경토중량의 0.3%에서 1.5%까지 혼화처리했을 때 T-N 함량은 7주 동안 일정한 양을 유지하였으며, CMS 시용량과 비례하여 증가하였다. $NH_4-N$는 시간경과에 따라 전체적으로 감소하였으며, 시용량이 적을수록 감소 폭은 커졌다. 반면, $NO_3-N$ 함량은 시간이 경과함에 따라 지속적으로 증가하여 수분불포화 조건에서 CMS를 처리하면 초기부터 질산화가 촉진되었으며 시용량이 적은 0.3%와 0.6% 처리구에서 $NO_3-N$의 증가폭이 컸다. CMS를 처리한 토양의 pH는 낮아지고 염농도 및 유기물 함량은 증가되었으나 유효인산의 함량에는 영향을 미치지 않았다. CMS 처리로 토양 미생물의 밀도는 무처리에 비하여 현저하게 증가하였으며, 특히 방선균은 배양 7주 동안 지속적인 밀도 증가를 나타내었고, 질소순환과 관계되는 미생물상의 밀도 변화도 무처리에 비하여 증가하는 경향이었다.

• 에너지공학
• /
• 제12권2호
• /
• pp.74-83
• /
• 2003

APR1400과 같은 차세대 원자력발전소에서는 원자로 안전성을 증진시키기 위하여 SDVS와 같은 계통을 도입하고 있다. 완전급수상실사고와 같은 경우는 POSRV가 개방되어 수조내 Sparger를 통하여 증기가 방출·응축되게 된다 증기가 응축함에 있어서 설계에서 고려해야 될 사항은 하중과 수조 혼합이며 증기제트 응축의 물리적 현상 이해를 통하여 적절한 대처를 마련할 수 있다. 수조내 Sparger를 통하여 분사되는 증기 응축에 대하여 하중과 수조 혼합 검토에 도움이 될 수 있도록 증기제트 응축의 물리적 현상 이해에 대한 검토와 평가를 수행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권4호
• /
• pp.533-538
• /
• 2004

Canonical sampling method has been presented to generate the initial conditions for reactive flux studies of organic reactions in water. Velocity Verlet version of Nose-Hoover chain dynamics algorithm has been employed to sample the initial conditions according to canonical distribution. The unstable normal mode of a transition state has been introduced to define a dividing plane separating reactant and product regions in reaction processes. This method has been implemented and tested for the case iels-Alder reaction of methyl vinyl ketone (MVK) and cyclopentadiene (CPD) in water, providing a reliable tool for further reactive flux molecular dynamics studies in condensed media.

• The Korean Journal of Ecology
• /
• 제24권2호
• /
• pp.121-123
• /
• 2001

Gums, resins and gum-resins represent a variety of plant exudates that are highly prized and are extensively used in various industries. The usage of water soluble gums is growing at faster rate as they are excellent suspending agents, dispersants stabilizing agents, emulsifiers and gel forming agents. The gums are made up of carbohydrate polymers, composed of sugar units glycosidically condensed to form large molecules. Resins are non-volatile products, and oxidative products of terpenes or fatty acids, and are of greater commercial importance. They are soluble in water and contrasted with gums, soluble in organic solvents only.

• Journal of Dairy Science and Biotechnology
• /
• 제19권1호
• /
• pp.13-21
• /
• 2001

Milk can be regarded as a complete food, containing protein, fat, lactose, vitamins and minerals. Milk is heated for a variety of reasons. The main reasons are: to remove pathogenic organisms; to increase shelf-life. But, when milk is heated, many changes take place: denaturation of whey proteins and interaction with casein, Maillard browning, losses of vitamin and minerals. The addition of a additive and milk powder to flavor and taste may cause undesirable change of quality during heating milk. The reconstituted milk is the milk product resulting from the addition of water to the dried or condensed form in the amount necessary to re-establish the specified water solids ratio. Therefore, according to the increasement of consumption of processed milk, the necessity for study about the quality of processed milk mixed with reconstituted milk arose.

• 상하수도학회지
• /
• 제22권6호
• /
• pp.673-679
• /
• 2008

The representative microorganism of autotrophic denitrification using sulfur granule, oxidizes the reduction from S and performs denitrification by reducing $NO_3{^-}-N$ to $N_2$ gas. The sampling of autotrophic denitrification microorganisms has been performed from foreshore sludge, condensed sludge, and active sludge, but the analysis of autotrophic denitrification microbial community characteristics has been lacking. Based on the separation and identification of each sample using the PCR and DGGE methodologies, many types of sulfuric microorganisms and autotrophic denitrification microorganisms were found.

• 동아시아식생활학회지
• /
• 제14권4호
• /
• pp.343-347
• /
• 2004

Abundant amounts of unripe apples, which were picked out before maturation, were abolished every year fer wastes. Since unripen apples are known to be rich in functional components, the ultimate objective of this research was to utilize them for food resources. The concentrations of polyphenols in hot water extract were the lowest, those in 75% acetone extract the highest. Concentrations of polyphenols in 5/30 sample were 3.5 times higher than those in 6/30 sample regardless of solvents used for extraction. The degree of condensation of flavanolic tannins in the peel was lower than those of the other parts, and the hot water extract was more condensed than the acetone extract. The amount of total flavonoids in the peel and 5/30 samples were 2.7 and 5.0 times higher than those of the flesh and 6/30 samples, respectively.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.90-95
• /
• 2021

Surface modification technique enabling the control of condensation provides various benefit in various engineering systems, such as heat transfer, desalination, power plants, and so on. In this study, lubricant oil-impregnation into Teflon-coated nanoporous anodic oxide layer of aluminum to enhance a de-wetting and mobility of water droplet on surface. Due to the surface treatment improving water-repellency, the condensation mode is changed to dropwise, thus the frequency of sliding condensed water droplet on surface is increased. For these reasons, the surface of oil-impregnated Teflon-coated nanoporous anodic aluminum oxide shows significantly enhanced condensation heat transfer compared to bare aluminum surface. In addition, the porosity of anodic aluminum oxide affected the mobility of water droplet even with oil-impregnation and Teflon-coating, indicating that the optimization of porous structure of anodic oxide is required for maximizing the condensation heat transfer.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.276-281
• /
• 2000

A simulation program using the mass transfer correlation was constructed to analyze 1-D simplified condensing flow across the tube bank. Higher efficiency was anticipated by reducing the flue gas temperature down below the dew point where the water vapor in the flue gas is condensed at the surface of the heat exchanger; that is, the heat transfer by the latent heat is added to that by the sensible heat. Thus, there can be an optimum operating condition to maximize the heat recovery from the flue gas. The temperature rises of the flue gas and the cooling water between the inlet and the outlet of the tube bank were compared with the experimental data reported previously. The predicted results agree well with the experimental data. Using this simulation program, the parametric studies have been conducted fur various operating conditions, such as the velocities and temperatures of the vapor/gas mixture and the cooling water, the number of the rows, and the conductivity of the wall material.