• Journal of Chest Surgery
• /
• 제14권4호
• /
• pp.339-344
• /
• 1981

Eight patients underwent tracheal resection and reconstruction for tracheostomy and postintubation injuries from 1971 to early 1981. The ages ranged from 12 years to 59 years. The patients had 7-cuff stenosis and one stomal lesion in whom intubated long. Four male and four female patients were treated. Cervical approach was used in one, cervicomediastinal in 3 and transthoracic in four. The longest length of resection extended to 4 cm in whom cervico-upper half mediastinal incision and neck flexion were applied. Techniques for obtaining tension-free anastomosis included cervical flexion or division of the inferior pulmonary ligament and mobilization of the right hilum. Concurrent tracheostomy was not needed in all. There was one death at the end of emergency operation from anesthetic accident. Granulations at the anastomosis line, necessitating bronchoscopy, were noted in two and the lesion did not recurred after removal. No restenosis or other complications occurred during long follow-up.

• Ocean Systems Engineering
• /
• 제9권2호
• /
• pp.179-190
• /
• 2019

This paper deals with the problem of the global stabilization for a class of ocean structure systems. It is well known that, in general, the global asymptotic stability of the ocean structure subsystems does not imply the global asymptotic stability of the composite closed-loop system. The classical fuzzy inference methods cannot work to their full potential in such circumstances because given knowledge does not cover the entire problem domain. However, requirements of fuzzy systems may change over time and therefore, the use of a static rule base may affect the effectiveness of fuzzy rule interpolation due to the absence of the most concurrent (dynamic) rules. Designing a dynamic rule base yet needs additional information. In this paper, we demonstrate this proposed methodology is a flexible and general approach, with no theoretical restriction over the employment of any particular interpolation in performing interpolation nor in the computational mechanisms to implement fitness evaluation and rule promotion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.660-663
• /
• 2003

This paper proposes a systematic approach for an accurate control of the Terfenol-D actuator taking into account hysteresis, modeled by applying the classical Preisach operator with memory curve. A desired input displacement is calculated by using the hysteresis inverter, which is fed into the actuator. Then the PI compensator corrects the error between the commanded and actual displacements. Experiments with the step responses show that the PI controller settles in 70 ms and the hybrid controller in 20 ms. It means that the concurrent application of two control schemes is effective to control the actuator.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1152-1166
• /
• 2023

The bubbly flow of air or steam in subcooled water are investigated here in several test cases, characterized by different pipe sizes, bubble dimensions and flow rates, by means of CFD using a Eulerian-Eulerian approach. The performance of models that differ for the turbulence closure in the continuous phase, as well as for the description of the lift force on the dispersed phase, are compared in detail. When air is considered, the space of the experimental parameters leading to a reasonable performance for the selected models are identified and discussed, while the issues left in the modelling of the concurrent condensation are highlighted for the cases where steam is used.

• ETRI Journal
• /
• 제46권1호
• /
• pp.118-126
• /
• 2024

In human conversations, listeners often utilize brief backchannels such as "uh-huh" or "yeah." Timely backchannels are crucial to understanding and increasing trust among conversational partners. In human-machine conversation systems, users can engage in natural conversations when a conversational agent generates backchannels like a human listener. We propose a method that simultaneously predicts backchannels and recognizes speech in real time. We use a streaming transformer and adopt multitask learning for concurrent backchannel prediction and speech recognition. The experimental results demonstrate the superior performance of our method compared with previous works while maintaining a similar single-task speech recognition performance. Owing to the extremely imbalanced training data distribution, the single-task backchannel prediction model fails to predict any of the backchannel categories, and the proposed multitask approach substantially enhances the backchannel prediction performance. Notably, in the streaming prediction scenario, the performance of backchannel prediction improves by up to 18.7% compared with existing methods.

• 정보처리학회논문지D
• /
• 제17D권1호
• /
• pp.9-16
• /
• 2010

웹서비스의 매시업이 새로운 소프트웨어 개발방법으로 주목받고 있다. 본 논문에서는 하나의 페이지가 여러 서비스 메소드를 비동기 호출의 방식으로 인터페이스하는 클라이언트 매시업을 고려한다. 비동기 웹서비스 호출의 컬백이 사용자 인터페이스와 병행하여 수행되는 경우 컬백은 사용자 인터페이스의 연산들과 메모리와 화면을 공유한다. 또한 사용자가 서비스 요청의 회신이 도착하기 전에 다른 요청을 전송하는 다중 호출이 가능하다면 공유 자원에 대한 병행 처리의 문제는 더 복잡해진다. 이 문제를 해결하기 위한 본 논문의 기여는 다음과 같다. 첫째, RESTful 서비스의 매시업 페이지를 사용자 액션과 컬백으로 모델링하고, 매시업 페이지에서 다중 요청의 유형을 제시하였다. 둘째, 컬백과 사용자 액션의 충돌을 공유자원의 측면에서 정의하고 병행 가능한 컬백의 조건을 제시하였다. 셋째, 공유 자원에 대한 충돌이 가능한 컬백을 순차화하여 수행하는 방법을 제시하였다. 마지막으로 제안된 컬백의 병행가능성 검사와 순차화 방법을 XForms 언어에 적용하고 브라우저에서 구현하여 사용자 경험을 향상시킬 수 있음을 실험적으로 증명하였다.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.439-452
• /
• 2022

A forecast of slope behavior during catastrophic events, such as earthquakes is crucial to recognize the risk of slope failure. This paper endeavors to eliminate the significant supposition of predefined slip surfaces in the slope stability analysis, which questions the relevance of simple conventional methods under seismic conditions. To overcome such limitations, a methodology dependent on the slip line hypothesis, which permits an automatic generation of slip surfaces, is embraced to trace the extreme slope face under static and seismic conditions. The effect of earthquakes is considered using the pseudo-static approach. The current outcomes developed from a parametric study endorse a non-linear slope surface as the extreme profile, which is in accordance with the geomorphological aspect of slopes. The proposed methodology is compared with the finite element limit analysis to ensure credibility. Through the design charts obtained from the current investigation, the stability of slopes can be assessed under seismic conditions. It can be observed that the extreme slope profile demands a flat configuration to endure the condition of the limiting equilibrium at a higher level of seismicity. However, a concurrent enhancement in the shear strength of the slope medium suppresses this tendency by offering greater resistance to the seismic inertial forces induced in the medium. Unlike the traditional linear slopes, the extreme slope profiles mostly exhibit a steeper layout over a significant part of the slope height, thus ensuring a more optimized solution to the slope stability problem. Further, the susceptibility of the Longnan slope failure in the Huining-Wudu seismic belt is predicted using the current plasticity approach, which is found to be in close agreement with a case study reported in the literature. Finally, the concept of equivalent single or multi-tiered planar slopes is explored through an example problem, which exhibits the appropriateness of the proposed non-linear slope geometry under actual field conditions.

• 디자인학연구
• /
• 제18권4호
• /
• pp.95-104
• /
• 2005

본 연구의 분석목표는 제품 디자인의 결정요인을 추정하고 품질경쟁력, 제품 신뢰성, 고객충성에 대한 제품 디자인의 파급효과를 실증적으로 분석함으로써 디자인 경영이론에 유용한 시사점을 도출하는 것이다. 상기한 실증적 분석을 위하여, 한국 제조업 부문의 400개 표본기업에 대한 설문조사(2003년 8월${\sim}$10월)를 통하여 관련 측정변수들을 추출하였다. 본 연구의 분석결과는 다음과 같다. 첫째, 제품 디자인의 유의적 결정요인은 연구개발력 수준, 연구개발투자 수준, 혁신활동 수준(5S, TQM, 6Sigma 운동, QC 등)으로 추정되었다. 이 분석결과는 제품 디자인과 제품 개발을 동시적 엔지니어링(CE: concurrent engineering) 개념으로 파악하고 이들의 성과를 평가하기 위한 시스템관련 원리(system-related principle)와 행렬관련 원리(matrix-related principle)로써 서술한 Pawar and Driva(1999)를 실증적으로 뒷받침한다. 둘째, 제품 디자인의 파급효과는 제품 디자인${\rightarrow}$품질경쟁력${\rightarrow}$고객만족${\rightarrow}$고객충성의 인과관계로 나타나는 것으로 추정되었다. 즉, 제품 디자인은 고객만족을 직접적으로 유발하는 것이 아니라 품질경쟁력을 경유하여 간접적으로 고객만족을 유도한다는 것이다. 이 분석결과는 디자인 경영이 통합된 제품 품질의 중요한 결정인자라고 분석한 Flynn et al(1994), Ahire et al.(1996), Ahire and Dreyfus(2000) 등을 실증적으로 뒷받침한다. 일반적으로 제품 디자인의 접근방법으로써 3가지 즉 (1) 제품 개발자(엔지니어, 기술개발담당자, 품질관리팀)를 중심으로 하는 QFD(quality function development)의 접근방법, (2) 마케팅 담당자를 중심으로 하는 컨조인트 분석(conjoint analysis), (3) 상기의 2가지 접근방법의 상호보완적 및 동시적 결합 및 피드백의 주장(Pullman, Moore and Wardell, 2002)을 들 수 있다. 그러나 본 연구의 실증적 분석결과에는 품질경쟁력이 제품 디자인과 고객만족사이에 교량적 역할을 담당한다. 이 분석결과는 제품 디자인에 대한 품질경쟁력의 2가지 접근방법(QFD의 접근방법과 컨조인트 분석)의 조화를 이룰 수 있는 이론적 기초가 될 수 있다. 즉, 제품디자인의 결정요인 분석결과는 QFD의 접근방법에, 제품 디자인 파급효과 분석결과는 컨조인트 분석에 각각 보완적 기여를 할 수 있다. 이와 동시에, 실증적 분석결과는 Ettlie(1997)의 디자인 통합(DI) 이론에 대한 실증적 기반을 제공할 수 있다. 마지막으로, 성공적인 디자인 경영(DM)을 위해서는 최고 경영자의 지원뿐만 아니라 부처 간 의사소통의 장애요인을 제거하고 CFT(cross-functional team)를 운영함으로써 동시적 엔지니어링(CE) 및 제품 및 공정 디자인의 개발이 제품 개발의 속도를 가속화하고 디자인 품질을 높이며 시장 성공을 보증할 수 있도록 해야 한다.

• Journal of Computing Science and Engineering
• /
• 제6권2호
• /
• pp.89-104
• /
• 2012

In dynamic Web service environments, the performance of the Internet is unpredictable; the reliability and effectiveness of remote Web services are also unclear. Therefore, it can hardly be guaranteed that the quality of Web service (QoWS) attributes of Web services do not fluctuate with the dynamic Web service environments. When a composite service is planned in the context of dynamic service environments, there is another aspect which has not been taken into account by existing works, namely, concurrency - the fact that multiple requests to a composite service may arrive at the same time. Considering the dynamics of Web service environments and concurrency of requests, we propose in this paper a service selection scheme which adopts top-k dominating queries to generate a composition solution rather than only select the best composition solution for a given request. The experimental results have investigated the efficiency and effectiveness of our approach and shown that it outperforms baseline and traditional methods for service selection.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.663-671
• /
• 2005

Distributed operation of overall structural design process, by which product and process optimization are implemented, is presented in this paper. The database-interconnected multilevel hybrid method, in which the conventional design method and the optimal design approach are combined, is utilized there. The method selectively takes the accustomed procedure of the conventional method in the conceptional framework of the optimal design. Design conditions are divided into primary and secondary criteria This staged application of design conditions reduces the computational burden for large complex optimization problems. Two kinds of numeric and graphic processes, are simultaneously implemented on the basis of concurrent engineering concepts in the distributed environment of PC networks. Numerical computation on server and graphic works on independent client are communicated through message passing. Numerical design is based on the optimization methodology and the drawing process is carried out by AutoCAD using the AutoLISP programming language. The prototype design experimentation for some steel trusses shows the validity and usability of the method. This study has sufficient adaptability and expandability in methodology, in that it is based on general theory and industry standard systems.