• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.35-38
• /
• 1990

Depths of the vertical cracks in the concrete were determined by the time of flight of the ultrasonic waves. The ultrasonic waves are diffracted at the crack tip, and the arrival time of ultrasonic waves are dependent on the crack depth and speration distance between transmitting and receiving ultrasonic transducers. The vertical cracks with 0.2-2mm width and 10-100mm depth were examined by multi-layered ultrasonic transducers. It was found that the time of flight of ultrasonic waves were proportional to the depth of vertical cracks. The depth of vertical cracks in the range of 20-100mm depth could be determined by the transient time of the diffracted ultrasonic waves

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.809-812
• /
• 2008

지난 수년간 콘크리트의 염소이온 침투와 유관되어 실험방법론 및 해석적 모델 기법의 개발에 많은 발전이 있어왔다. 그러나 실제 콘크리트 구조물에는 다소의 균열이 존재하며 이는 장기 내구성에 큰 영향을 줄 수 있음에도 불구하고, 대부분의 연구들은 비균열의 콘크리트를 대상으로 연구되어 온 문제점이 있었으며 균열이 존재하는 콘크리트의 염소이온 침투에 대한 연구는 매우 드문 실정이다. 본 연구의 저자는 단기 촉진실험에 의하여 균열이 염소이온에 미치는 영향을 살펴보았다. 그러나 신뢰성있는 결과를 얻기 위해서는 장기 실험을 통한 고찰이 필요하다. 본 연구의 목적은 장기 및 단기 실험결과를 비교하였는데, 자기치료 효과에 의하여 균열이 시간이 경과함에 따라 감소하는 뚜렷한 경향을 확인할 수 있었다.이러한 경향은 균열 폭이 클수록 자기치료에 의한 균열감소 효과가 더욱 뚜렷하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 토목섬유 특별세미나
• /
• pp.35-38
• /
• 2000

Reflection cracks can be occurred in the asphalt layer overlaid on portland cement concrete pavements, because this layer is sensitive to environmental conditions including temperature changes and displacements of the pavement. A result of trial applications using glass fiber grids is introduced in this paper. Glass fiber grids were used between the asphalt layer and the concrete base to reduce the reflection crack of the asphalt layer. No cracks were observed in the glass grid installed area about 2 years later from trial constructions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.99-104
• /
• 2000

In this paper, the crack properties fiber reinforced concrete(SFRC) beams by experimental method is discussed. The major role played by the steel fiber occurs in the post-cracking zone, in which the fibers bridge across the cracked matrix. Because of its improved ability to bridging cracks, SFRC has better crack properties than that of reinforced concrete(RC). Crack properties are influenced by longitudinal reinforcement ratio, volume and type of steel fibers, strength of concrete and the stress level. Crack width and number of cracks in SFRC beams have been evaluated from experimental test data at various levels of stress for the tested beams.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.633-636
• /
• 1998

The use of concrete pavements is increasing by virtue of durability and excellent load resisting capacity. But cracks and demage in concrete pavements may be occurred by continuous reciclic load, as time goes by. Therefore, transverser contraction joints are constructed in concrete pavements to relieve tensile stresses, and when properly spaced they control the location of transverse cracks.

• 한국멀티미디어학회논문지
• /
• 제10권8호
• /
• pp.1068-1077
• /
• 2007

본 논문에서는 콘크리트 표면 품질이 좋은 영상뿐만 아니라, 기존의 영상처리 기법에서 다루지 않았던 표면 품질이 좋지 않은 영상에 대해서도 효율적으로 균열을 추출하고, 추출된 균열의 특징인 길이, 방향, 폭을 자동으로 계산한 후, ART2 기반 RBF 네트워크를 적용하여 균열의 방향성($-45^{\circ}$방향, $45^{\circ}$방향, 횡방향, 종방향)을 인식하는 기법을 제안한다. 본 논문에서 제안한 콘크리트 균열 추출 및 분석 알고리즘은 Roberts 연산자를 이용하여 균열을 강조하고, 강조된 균열을 Multiple 연산을 이용하여 균열과 배경간의 밝기 차이를 크게 한 후, 개선된 적응 이진화 기법을 이용하여 균열의 후보 영역을 추출한다. 추출된 균열 후보 영역을 형상 분석과 위치 및 방향 분석을 이용하여 3차례에 걸쳐 잡음을 제거하고, 잡음 제거 과정에서 잡음으로 분류된 균열을 복원하여 균열의 특징을 분석한다. 그리고 ART2 기반 RBF 네트워크를 균열의 방향성($-45^{\circ}$방향, $45^{\circ}$방향, 횡방향, 종방향)에 적용하여 인식한다. 제안된 ART2 기반 RBF 네트워크는 입력층과 중간층으로의 학습은 ART2을 적용하고 중간층과 출력층간의 학습은 Delta 학습 방법을 적용한다. 실제 콘크리트 표면 균열 영상을 대상으로 실험한 결과, 제안한 방법이 기존의 방법보다 균열의 검출 성능이 개선되었고 잡음으로 분류된 균열도 효율적으로 복원되었다. 또한 제안된 ART2 기반 RBF 네트워크가 균열의 방향성 인식에 효율적임을 확인할 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.291-296
• /
• 2000

The crack of concrete induced by the heat of hydration is s serious problem, particularly in concrete structures such as bridge piers. thick walls, box type walls, mat-slab of nuclear reactor building, dams of foundations of high rise buildings, etc. As a result of the temperature rise and restriction condition of foundation, the thermal stress which way induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, design change which consider steel bar reinforcement, operation control and so on. In this study, firstly it introduce the thermal cracks control technique by employing low-heat cement concrete, thermal stress analysis, Secondly it shows the application of the cracks control technique like the bottom of No.15,16 Underground LNG Tank in Inchon.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.539-545
• /
• 1997

Since the length of massive wall-structure is generally longer and larger than its thickness and a lift height of concrete of placement, cracks induced by hydration heat are governed by outer structural restriction rather than inner one. However, the degree of restriction control is expected to be affected by the sizes of wall thickness, length and a lift height. Thus, this analytical study aims at the development of relationship among those to minimize thermal cracks. In addition, the effect of types of cement on the thermal heats and stresses is evaluated for anti-sulphate and 2blended Portland cements concrete. It was found from analytical study that a lift height of concrete placement is the most important factor controlling thermal cracks, and the increase of lift heights is not always detrimental to structural safety.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1181-1186
• /
• 2000

The crack of concrete induced by the heat of hydration is a serious problem, particularly in concrete structures such as biers, thick walls, box type walls, mat-slab of nuclear reactor buildings, dams or foundations of high rise buildings, etc.. As a result of the temperature rise and restriction condition of foundation, the thermal stress which may induce the cracks can occur. Therefore the various techniques of the thermal stress control in massive concrete have been widely used. One of them is prediction of the thermal stress, besides low-heat cement which mitigates the temperature rise, design change which considers steel bar reinforcement, operation control and so on. In this study, firstly it introduce the thermal cracks control technique by employing low-heat cement concrete, thermal stress analysis considering season. Secondly it shows the application of the cracks control technique like block placement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.7-8
• /
• 2014

Latex-modified concrete using ready mix concrete (R-LMC) was developed for application of building construction project (specifically, the rooftop of a parking garage unable to use heavy equipments for bridge deck overlay) due to three major outstanding properties of R-LMC; bond strength, resistance of cracks at early age, and resistance of freezing and thawing. However, R-LMC at the placement stage is required to be sufficiently cured because R-LMC is very sensitive to rate of evaporation of surface moisture. This study focused on effects of different curing methods and climate condition on cracks on the surface of hardened R-LMC considering the chart of rate of evaporation of surface moisture from concrete provided by American Concrete Institute in manual for placement of latex modified concrete.