• Journal of Information Display
• /
• v.13 no.1
• /
• pp.7-16
• /
• 2012

In this paper, the problem concerning the color accuracy of imaging systems using color filters is examined. It is shown that the only solution to the problem is to build systems with the spectral response matching the CIE curves as closely as possible. If the spectral response does not closely match the CIE curves, it was demonstrated that calibration cannot solve the problem and will result in very unstable colorimeters. A practical solution that uses telecentric lenses on the sensor side in addition to dedicated color filters for each CCD detector is presented. For systems that closely match the CIE curves, an innovative method of improving the color accuracy based on the precise measurement of the spectral response is presented. The small discrepancies in the spectral response with regard to the CIE curves are corrected in different ways during the measurements. Finally, it is shown that the tristimulus calibration that is used for display measurement is very unstable for systems without CIE matching and is much more stable with systems that closely match the CIE curves.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2010

This paper presents global and optimal solution for weapon assignment problems using the Munkres assignment algorithm. We propose a new modeling method of weapon assignment problems concerning some constraints of weapon systems. In this paper, we compares the Munkres weapon assignment algorithm with two other algorithms employing a search tree model in terms of computational complexity and performance. One is an optimal algorithm using exhausted search and the other is a greedy algorithm which selects the first search result as a solution. The experiment results show that the Munkres weapon assignment algorithm has better performance and less computational complexity in comparison with the two other algorithms.

• The KIPS Transactions:PartA
• /
• v.13A no.6 s.103
• /
• pp.489-494
• /
• 2006

This paper improves the algorithms for Speculative Partial Redundancy Elimination(SPRE) proposed by Knoop et al. This research brings up an issue concerning a field to which SPRE cannot be applied, and suggests a solution to the problem. The Improved SPRE algorithm performs the execution speed optimization based on the information on the execution frequency from profiling and the memory space optimization.

• Journal of Power System Engineering
• /
• v.18 no.4
• /
• pp.91-96
• /
• 2014

The application of the recent model-based control schemes for robot manipulators require the solution of problems concerning various aspects, from the mechanical design to the necessity of determining a robot model suitable for control, and of experimentally testing the control performances. For one solution, integration of SolidWorks with Simscape for designing and controlling robot manipulators is presented in this paper. The integration provides a platform for rapid control prototyping of robot manipulators without the need for building real prototypes. Mechanical drawings of a robot are first created using Solidworks and imported into the Simscape, where a robot is represented by connected block diagrams based on the principle of physical modeling. Simulation examples for 7-DOF SAM ARM made by Berrett Technology Inc. are testified to show effectiveness of the presented platform.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.414-425
• /
• 2010

In this paper, a procedure is developed for identifying a number of representative solutions manageable for decision-making in a multiobjective optimization problem concerning the test intervals of the components of a safety system of a nuclear power plant. Pareto Front solutions are identified by a genetic algorithm and then clustered by subtractive clustering into "families". On the basis of the decision maker's preferences, each family is then synthetically represented by a "head of the family" solution. This is done by introducing a scoring system that ranks the solutions with respect to the different objectives: a fuzzy preference assignment is employed to this purpose. Level Diagrams are then used to represent, analyze and interpret the Pareto Fronts reduced to the head-of-the-family solutions.

• Fashion & Textile Research Journal
• /
• v.8 no.5
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.

• The Journal of Internal Korean Medicine
• /
• v.20 no.1
• /
• pp.167-180
• /
• 1999

Cervus elaphus, being known to reinforce Kidney, have tested to study the effects concerning damages of brain tissue induced by lipid peroxidation. In vitro, the level of lipid peroxide in brain tissue was decreased proportinally according to dose by Cervus elaphus extract solution for aqua-acupuncture (CESAA). It was much more decreased, when lipid peroxidation was induced with Fe(II). And, it was seen proportinally decrease according to the dose of CESAA on xanthine oxidase activities and type conversion ratio. However, I can not find special changes about aldehyde oxidase activities. And, I had observed the effects of CESAA on damages of rat's brain following ischemia and reflow. Before ischemia was caused, CESAA was applied 0.2 ml per 250 g through femoral vein in ischemia and reflow group and normal sailine was applied in normal group. Ischemia was caused by cervical artery's clamp for 30 min and reflowed by clamp remove after 15 min. It was increased on the content of lipid peroxidation, activies and type conversion ratio of xanthine oxidase following ischemia and reflow. However, they were decreased when CESAA was pre-appllied. However, it could not seen special changes on aldehyde oxidase activities, either. In conclusion. CESAA recovers the damage of brain due to ischemia and reflow by decreasing the lipid peroxidation through decreasing of xanthine oxidase activies and type conversion ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.361-369
• /
• 2001

This paper deals with numerical efficiency of nonlinear solution technique for space trusses. It will propose the combined Arc-length method to trace structural behavior after reaching buckling load as opposed to the current Arch-length method. The combined Arc-length method uses the current stiffness parameter as a control variable. It uses Secant-Newton method in stable path and applies Arc-length method in unstable path. To evaluate efficiency of solution technique, the accuracy of solution, convergence, and computing time concerning illustrative numerical examples are compared with the current Arc-length method. It show that the combined Arc-length method, as proposed in this paper, is superior to the current Arc-length method in numerical nonlinear analysis.

• Journal of Korean Society of Archives and Records Management
• /
• v.8 no.1
• /
• pp.235-255
• /
• 2008

Present study conducted surveys and interviews to identify a solution to the issues concerning the work conditions, job satisfaction, and operational systems of archivists working in the Korean government agencies. Job characteristics were measured using the five-factor structures of Hackman and Oldham's(1976) Job Characteristic Models, professionalism, role conflict, stress, and turnover intentions. Job environment was measured in terms of communication, participation, social relations with coworkers and superiors, and job training. Job satisfaction was measured by general level of satisfaction, job meaningfulness, and commitment. Operational systems was analyzed in terms of organizational arrangement, role assignment, personnel management, and collaboration between the national archives and record centers. These analyses produced further implications and suggestions on personnel management of archivists and records managers.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.429-430
• /
• 2007

The enlargement of an electric power system network gives us much challenges concerning with network operation. In addition to it, the fast aging process of network equipments requires more chance to check and maintenance, and also the increase of heavy loaded facilities and the increase of the fault current in the network need to exchange with the larger facilities in capacity. Due to these reasons, outages trend to increase. Network solution studies for outages are performed mainly for two purposes. The first one is to find the countermeasures when the outage causes a violation of the network reliability criteria. And the second one is to minimize network constraints due to outages. There are so many outages around 400 for only one month. Therefore, in order to do case studies for outage, not only skilled persons are needed, but also many available tools to help properly. Concerning with proper tools, we will introduce a program which we developed to get informations concerned with network sensitivity, and an example to apply that program.