• 한국주조공학회지
• /
• 제15권5호
• /
• pp.477-482
• /
• 1995

A computer simulation model of various smelting process for melting waste sand was developed by using energy and material balance concept. This model can predict the coal, flux and oxygen consumption and the volume and temperature of off-gas. The major critical variables for smelting process can be explained by using the analysis of energy and material balance. The major conclusions were as follows; 1. The most important variables for smelting process were high post-combustion ratio, high heat transfer efficiency and refractory protection technology. 2. For saving energy in this smelting process, selection of raw materials i.e coal, flux are very important, espacially using of low volatile coal is very profitable. 3. The treatment cost of waste sand is high and environmental restriction is severe, in this reason we must be concerned in the treatment of waste sand by smelting process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.40.2-40
• /
• 2001

The protection system of the system communication, nuclear reactor and chemical reactor are representative of reliable system. This reliable system must be designed based on reliability as well as concept of safety, which is a failed system go a way of safe. Reliable system is composed of part of data acquisition, calculator, communication with redundancy, and a voter is important factor of reliability. Because it is serially connected. This paper presents a Design and Analysis of a Voting Mechanism considering Safety for reliable system Using EPLD. In the case of digital implementation a coincidence logic (voter) of reliable system, it needs CPU and memory, so increase a number of units. Therefore the failure rate and cost are increased on contrary when it is designed EPLD or FPGA.

• 한국항해항만학회지
• /
• 제34권2호
• /
• pp.91-95
• /
• 2010

Recently IMO and IALA have developed the strategy of e-Navigation and the concepts of VTM to enhance the safety, efficiency and security of vessel traffic and protection of the marine environment. And current technical and functional trends require vessel traffic management systems to be improved so as to control vessel traffic not only in waters of harbour area, but also within EEZ waters. Under the consideration of these circumstances, a three-layered vessel traffic management system was proposed in this paper. The proposed system consists of three sub-systems, called Local VTS, Regional VTS and National VTS, and those sub-systems are designed respectively to be suitable for managing vessel traffic within their own jurisdiction waters.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제4권6호
• /
• pp.57-65
• /
• 1998

According as the population has been having an advanced age, several problems which is due to the physical, spiritual, social and chronic diseases of the aged are occurred. And the necessity of domiciliary care or regional social facilities has come to offer a protection, care and medical services to them. Therefore, this study aims to represent the architectural data of a day-care center through comparative analysis with a foreign one, recognizing the necessity of the day-care center as a part of domiciliary care facilities As the method of this study, the concept and type of day-care services were founded with the operational realities. And the spatial composition of the present condition was investigated and analyzed.

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.459-466
• /
• 1996

A great amount of effort has been devoted to the constant improvement of such basic performance as dirvability, safety and enviromental protection. As a result, the total combination of various technologies has made it possible to produce safer and more comfortable automobiles. Among these technologies, plasma and thin film techniques are mainly cocerned with sensors, optics, electronics and surface modification. This paper first describes a concept of thin film processing in materials synthesis for sensors based on particle-surface interaction during deposition to provide a long life sensor applicable to sutomobiles. Some examples of parctical application of thin films to sensors are then given. These include(1) a thin films strain gauge for gravity sensors, (2) a giant magneto resistance film for speen sensors, and (3) a Magneto-impedance sensors fordetection of low magnetic field. Further progress of sophisticated thin film technology must be considered in detail to explore advanced thin film materials science and to ensure the field reliability of future sensor devices for automobile.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.582-582
• /
• 2012

Characteristics of a fusion-driven transmutation reactor was investigated. A compact reactor concept is desirable from an economic viewpoint. For the optimal design of a reactor, a radial build of reactor components has to be determined by considering the plasma physics and engineering constraints which inter-relate various reactor components. In a transmutation reactor, design of blanket and shield play a key role in determining the size of a reactor; the blanket should produce enough tritium for tritium self-sufficiency, the transmutation rate of waste has to be maximized, and the shield should provide sufficient protection for the superconducting toroidal field (TF) coil. To determine the radial build of the blanket and the shield, not only a radiation transport analysis but also a burnup calculation were coupled with the system analysis and it allowed the self-consistent determination of the design parameters of a transmutation reactor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1003-1005
• /
• 1997

To evaluate the quality of a system or its ability to perform a required function, it is necessary to quantify the reliability of that system. The reliability techniques are based on the concept of expected failure rate and average-outage-duration method. For each load point, the expected failure rate, average outage duration and average annual outage time are evaluated. This paper deals with the reliability evaluation for distribution system including the protection relay system. In evaluating the reliability, it suggests a method for the analysis of protective system reliability, that provides a probabilistic measure of the success of the protective apparatus to perform its intended function. The analysis shows the dependency of success on the reliability of many components, and the way this reliability may be enhanced by redundancy.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1128-1133
• /
• 2009

Recently super complex culture shopping facility development seeks consumer' convenience present and are coming restaurant neighborhood, cinema, shopping, hotel etc, according to intensive plan. Such as complex culture shopping facility was developed to most subway station area center and have concept that is space for a main facilities or space for environment protection, citizens' a rest in city. Howeve,r space of recently domestic large size complex culture shopping facility that do not plan systematically was lacking and caused result that do not use efficiently space. Limited extent of research that define complex culture shopping equipment and analyze form of space and present space planning with analysis of research connected with complex usage development.

• 한국재난정보학회 논문집
• /
• 제3권2호
• /
• pp.3-21
• /
• 2007

Every country finds a way to respond a lot of terrors to keep her safe in many ways. Our country, before a terror outbreaks, makes various countermeasures such as strengthening international cooperative systems, strengthening informational ability to countermeasure terror, restricting for terrorists to enter or exit from our country, restricting other countries to input weapons in our country to prevent from terror in the aspect of precaution. A terror is more grave than any other one in behavior, and the criminals have to be punished so much and be discriminated from other ones, too. So, a concept of general crime and terror has to be defined. It is finished in the academic area to some extent, but, it is not sufficient in lawful area so much. Afterwards, it is necessary to establish counter-terror protection laws regulating terror crimes directly. In addition, it is necessary to define concretely and clearly the terror activity and deduce the definition of terrorism.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.77-78
• /
• 2007

This project has been designed for people to experience and understand the process, importance and benefit of coal fire plants. As the biggest and first typical Korean fire plant using coal, Boryeong fire plant has had important roll for the Korean industries. Even so, people has had wrong prejudice for the fire plant in terms of environmental protection. To do these kind of rolls, this museum has been designed with theme, "Boryeong fire plant mating symbiotic relationship between nature, human and technologies." The space was zoned with five major themes: i. circulation of energy in nature, ii. electric power and eco-fire plant, iii. future energy, iv roll for future of environment, v. Korea as the leading energy industry. The design has been developed focused on spatial experiences to make 'Design Sequence' with linear circulations haying several important destinations. The interior has been finished with minimal color and materials projected by big sized movie and various LED movie system. Concept of appordance has been used to make interactive experiences between exhibits and visitors.