• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.3-7
• /
• 2000

This paper is on the sensitivity characteristics of a concentric composite mandrel type fiber optic acoustic sensor with inclusion of an air cavity With the finite element method, we have analyzed sensitivity variation of the sensor in relation to its geometrical factors such as thickness of the air cavity, thickness of the foaming layer, and the ratio of inner diameter/outer diameter of the mandrel. Results of the analysis suggest a thicker air cavity, a thinner foaming layer, and a smaller ratio of the inner diameter/outer diameter of the mandrel to be desirable for higher sensitivity. The sensor structure designed with the above rules provides the sensitivity of about 0.8dB higher than that of a normal concentric composite mandrel sensor without the inherent air cavity.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1581-1598
• /
• 2015

A concentric braced steel frame is a very efficient structural system because it requires relatively smaller amount of materials to resist lateral forces. However, primarily developed as a structural system to resist wind loads based on an assumption that the structure behaves elastically, a concentric braced frame possibly experiences the deterioration in energy dissipation after brace buckling and the brittle failure of braces and connections when earthquake loads cause inelastic behavior. Consequently, plastic deformation is concentrated in the floor where brace buckling occurs first, which can lead to the rupture of the structure. This study suggests reinforcing H-shaped braces with non-welded cold-formed stiffeners to restrain flexure and buckling and resist tensile force and compressive force equally. Weak-axis reinforcing members (2 pieces) developed from those suggested in previous studies (4 pieces) were used to reinforce the H-shaped braces in an inverted V-type braced frame. Monotonic loading tests, finite element analysis and cyclic loading tests were carried out to evaluate the structural performance of the reinforced braces and frames. The reinforced braces satisfied the AISC requirement. The reinforcement suggested in this study is expected to prevent the rupture of beams caused by the unbalanced resistance of the braces.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.203-211
• /
• 1998

ER clutch is a device using electro-rheological fluid which is one of so called intelligent materials. Power transmission behavior of an ER clutch can be controlled by electrical field applied tb the fluid. In this work, a new type of servomechanism is developed with two ER clutchs, driven by two electrical motors rotating in reverse directions. The concentric cylinder type ER clutch is operated by PID control. The system shows good angular position control characteristics with respect to sinusoidal and square inputs.

• Journal of The Korean Astronomical Society
• /
• v.22 no.1
• /
• pp.31-41
• /
• 1989

Luminosity profile of the late type spiral galaxy NGC 2403 was obtained using the PDS scan of the plate. Some physical parameters (scale length, total magnitude, central brightness, disk to bulge ratio and concentric indices) were calculated from the brightness distribution. Total mass and the mass to luminosity ratio were estimated from the fitting of various mass models.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.76.2-76.2
• /
• 2019

Shells in early-type galaxies are low surface brightness tidal debris, which are wide concentric arcs of overdense stellar regions with large opening angles. The most widely accepted mechanism today for shell formation is the merger scenario, but the dominant merger type producing shells is not clearly understood yet: major/minor and wet/dry mergers. Since shells are regarded as smoking-gun evidence of merging events, detailed understanding of shell galaxies is very useful to constrain the formation process of early-type galaxies. In this study, we investigate the metallicity gradients of eight early-type shell galaxies using CALIFA IFU data to better understand the nature and origins of galaxy shells. We estimate simple stellar population properties out to three effective radius from the measurement of Lick/IDS absorption line indices. We compare the metallicity gradients of shell galaxies with those of normal early-type galaxies in the same mass range. In this presentation, we discuss how much the gradients of shell galaxies are different from those of normal early-type galaxies and what the existence of galaxy shells implies about galaxy formation.

• 전기의세계
• /
• v.22 no.3
• /
• pp.13-24
• /
• 1973

In this report, as a method to solve the problems on impulse insulation coordination in ribbon core transformer owing to it's BIL stepping up, new design to alter winding distribution of multiple-layer concentric winding to Convex type winding is proposed. The main focus of this method is to settle the weakness of axial direction insulation strength and as a result of theoretical analysis through experiment of model transformers, the following conclusions are obtained; (a) As the electric loadings in a design which increases by strengthenning axial direction insulation endurance in presently avarilable transformers owing to it's BIL stepping up can be restricted in Convex type winding, reasonable design will be suited to the transformer with higher BIL. (b) Convex type winding is a very improved insulation design in respect of insulation coordination because it has shield plate effect to even impulse oscillation. (c) There is a disadvantage to cause leakage flux to increase in Convex type winding, however, the constancy of electric loadings in a design in spite of BIL stepping up restricts the increase of leakage flux to some extent.

• The Journal of Korean Physical Therapy
• /
• v.21 no.1
• /
• pp.73-80
• /
• 2009

Purpose: In order to examine difference in the activity of potential of spinal neurons and cortical neurons according to muscle contraction type in post stroke hemiplegic subjects and healthy subjects, the present study conducted an experiment as follows. Methods: The subjects in the experimental group were 17 left-side hemiplegic subjects (9 female, 8 male; mean age, 63.41$\pm$9.86 years) with the right hand as the dominant hand selected among post stroke hemiplegic subjects, and 17 age matched healthy control subjects (10 female, 7 male; mean age, 64.12$\pm$12.07 years). Movement-related cortical potentials (MRCPs) were measured using surface electromyography and electroencephalography while concentric and eccentric movements were made alternately. Results: As to the pattern of the activity of MRCP, which indicates the activity of motor cortical neurons, we found that the amplitude is high (p<0.01), the length of excitement is short (p<0.01) and the ascending gradient of amplitude to the peak increases (p<0.05) in post stroke hemiplegic subjects' lesion sites different from healthy subjects. Conclusion: The activity of cortical neurons was no difference in activity according to contraction type was observed in post stroke hemiplegic subjects' lesion sites. This suggests that there is no distinction in the activity of cortical neurons between concentric contraction and eccentric contraction. Accordingly, if post stroke hemiplegic subjects' activity of motor cortex is analyzed by measuring MRCPs, it is considered useful in research on neural plasticity or as a ground of clinical effects in the area of physical therapy for the central nervous system.

• Solar Energy
• /
• v.12 no.3
• /
• pp.47-59
• /
• 1992

In the concentric tube type recuperator, which is the most typical type of radiation recuperator, installed on the exhaust-secion of industrial furnace, air flows between the adiabatic outer tube and the inner tube in which exhausted gas flows with high temperature. The waste heat of the exhausted gas is transferred to the inner tube, and transferred from the inner tube to the flowing air. The heat transfer by radiation In the concentric tube type recuperator is modeled using spherical harmonics approximation, namely, P-N method and numerically analyzed considering the effect of dynamic flow field. The results are compared with the existing empirical data. In addition, a theoretical method is presented for the analysis of the heat transfer characteristics of a recuperator with a reradiator installed in the inner tube, which causes re-radiant in the inner tube, and the characteristics of the recuperator is analyszed and defined.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1305-1311
• /
• 2015

A butterfly valve is a type of flow-control device typically used to regulate a fluid flow. This paper presents an estimation of the shape parameter of the Weibull distribution, characteristic life, and $B_{10}$ life for a concentric butterfly valve based on a statistical analysis of the reliability test data taken before and after the valve improvement. The difference in the shape and scale parameters between the existing and improved valves is reviewed using a statistical hypothesis test. The test results indicate that the shape parameter of the improved valve is similar to that of the existing valve, and that the scale parameter of the improved valve is found to have increased. These analysis results are particularly useful for a reliability qualification test and the determination of the service life cycles.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.503-509
• /
• 2002

Cylindrical chamber silencers with an extended inlet and outlet are extensively used in many application fields to reduce the propagated noise in ducts. The basic attenuation effectiveness in the low frequency region can be explained by the reactive wave action inside the expansion chamber associated with the geometric configurations of the inlet and outlet locations, and the area expansion of the jacket. In this study. an acoustic analysis is carried out for a concentric extended pipe inserted into a simple expansion chamber. An algebraic equation is derived by using the eigenfunction expansion and orthogonality principle in which the acoustic pressures and particle velocities defined on each subdivided surface are expressed by the separable coordinates. By using the proposed analytical method, transmission losses are predicted for several configurations of the concentric extended systems and they agree very well with experimental results.