1 |
Chou, C.C., Chen, Y.C., Pham, D.H. and Truong, V.M. (2014), "Steel braced frames with dual-core SCBs sandwiched BRBs: Mechanics, modeling and seismic demands", Eng. Struct., 72, 26-40.
DOI
|
2 |
FEMA-356 (2000), Pre-standard and Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency; Washington D.C., USA.
|
3 |
Guo, Y.L., Zhang, B.H., Jiang, Z.Q. and Chen, H. (2015), "Critical load and application of core-separated buckling restrained braces", J. Construct. Steel Res., 106(3), 1-10.
DOI
|
4 |
Hoveidas, N. and Rafezy, B. (2012), "Overall buckling behavior of all-steel buckling restrained braces", J. Construct. Steel Res., 79(12), 151-158.
DOI
|
5 |
Inoue, K., Sawaizumi, S. and Higahibata, Y. (2001), "Stiffening Requirement for Un-bonded Braces Encased in Concrete Panels", J. Struct. Eng., 127(6), 712-719.
DOI
|
6 |
Jiang, Z., Guo, Y., Zhang, B. and Zhang, X. (2015), "Influence of design parameters of buckling-restrained brace on its performance", J. Construct. Steel Res., 105(2), 139-150.
DOI
|
7 |
KBC (2009), Korean Building Code and Commentary, Architectural Institute of Korea. [In Korean]
|
8 |
Kim, D.B. (2012), "Compressive behavior of the H-section brace which strengthened with cold formed elements for buckling restraint", University of Seoul M.S., Seoul, Korea. [In Korean]
|
9 |
Kim, M.K. (2013), "Structural behavior for H-shape brace reinforced by cold-formed elements", University of Seoul M.S., Seoul, Korea. [In Korean]
|
10 |
Kim, S.H. (2015), "Compressive behavior of H-shaped brace strengthened with non-welded cold-formed element", J. Construct. Steel Res., 112, 30-39.
DOI
|
11 |
Kim, J.G. and Park, J.H. (2008), "Cycle test of buckling restrained braces filled with square bars", Archtectural Institute of Korea, 24(10), pp. 53-60. [In Korean]
|
12 |
New Zealand Standard, NZS 4219 (2009), Seismic Performance of Engineering Systems in Buildings. (ISBN: 1-86975-114-0)
|
13 |
Pack, J.H. and Kim, J.G. (2008), "Cycle test of buckling restrained braces filled with square bars", Architectural Institute of Korea, 24(10), 53-60. [In Korean]
|
14 |
Palmer, K.D., Christopulos, A.S., Lehman, D.E. and Roeder, C.W. (2014), "Experimental evaluation of cyclically loaded, lager-scale, planar and 3-d buckling restrained braced frames", J. Construct. Steel Res., 101(10), 415-425.
DOI
|
15 |
Sabelli, R., Roeder, C.W. and Hajjar, J.F. (2013), NEHRP Seismic Design Technical Brief No. 8 - "Seismic design of steel special concentrically braced frame systems", NIST GCR 13-917-24.
|
16 |
Tsai, K.C., Lai, J.W., Hwang, Y.C., Lin, S.L. and Weng, C.H. (2004), "Research and application of double-core buckling restrained braces in Taiwan", Proceeding of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August, Paper No. 2179.
|
17 |
Watanabe, A., Hitomi, Y., Saeki, E., Wada, A. and Fujimoto, M. (1988), "Properties of brace encased in buckling-restraining concrete and steel tube", Proceedings of Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, August, Volume 04, pp. 719-724.
|
18 |
Zona, A., Ragni, L. and Dall'Asta, A. (2012), "Sensitivity-based study of the influence of brace over-strength distributions on the seismic response of steel frames with BRBs", Eng. Struct., 37, 179-192.
DOI
|
19 |
AISC (2010a), Steel Construction Manual, American Institute of Steel Construction Ins.
|
20 |
AISC (2010b), Seismic provisions for structural steel buildings, American Institute of Steel Construction Ins.
|
21 |
ASCE 7-10 (2013), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers. (ISBN: 0784410852)
|
22 |
Chen, C.C., Chen, S.Y. and Liaw, J.J. (2001), "Application of low yield Strength steel on controlled plasticization ductile concentrically braced frames", Can. J. Civil Eng., 28(5), 823-836.
DOI
|