• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.249-254
• /
• 1997

Stevioside was transglucosylated to improve its sweetness. Eighteen conditions were tested using the tables of orthogonal arrays of $L_{18}\;(2^{1}{\times}3^{7})$. Statistical analysis showed that the transglucosylation rate was significantly affected by temperature, the ratio of co-substrate (maltodextrin) to stevioside, pH, DE of maltodextrin and concentration of stevioside, in their order. Optimum conditions selected for temperature, ratio of co-substrate to stevioside, pH and DE of maltodextrin were $80^{\circ}C$, 1.0, 6.0 and 15, respectively. Glycosyl-stevioside with 68% yield of transglucosylation was produced at the optimum condition and found to have better quality in sweetness than stevioside and rebaudioside A.

• Korean Journal of Remote Sensing
• /
• v.29 no.3
• /
• pp.331-335
• /
• 2013

This study detected red tide areas using the existing Moderate-Resolution Imaging Spectroradiometer(MODIS) and Geostationary Ocean Color Imager(GOCI), and then compared the results between results of two sensors. The coasts of Jeollanam-do in the South Sea of Korea were set as the study area based on the red tide data which occurred on Aug. 26th, 2012. This study compared the results of sensors to detect red tides by using a satellite. In the results of analyzing MODIS by limiting it as chlorophyll concentration and the sea surface temperature which is considered to have red tides by the existing researches, it was possible to delete considerable amount of errors compared to the case of detecting red tides by using only chlorophyll while still there were differences from the range of red tides actually observed. In the results of GOCI by using empirical algorithm for detecting red tides, currently used by Korea Institute of Ocean Science & Technology(KIOST), it was possible to obtain more detailed results than MODIS. However, there was an area misjudged as red tides due to the influence of clouds. Also both MODIS and GOCI extracted red tides were not actually occurring, which might be because they were not able to perfectly distinguish red tides from turbid water in coastal areas with high turbidity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.5
• /
• pp.582-593
• /
• 2015

For military training and course-of-action analysis, OneSAF Int'l version being used in ROK Army has a limited capability to simulate NBC(nuclear, biological, and chemical) damages. For high-fidelity NBC combat simulation, it is required to visualize NBC contamination dispersion in consideration of weather conditions and terrain characteristics. However, OneSAF itself handling interaction among thousands of combat entities cannot carry out a simulation of NBC contamination dispersion because it brings about an excess burden. To resolve this problem, this research aims to design simulation federation for analysis on NBC operational effects. After examining design consideration to connect OneSAF and a NBC contamination dispersion model, we design a federation architecture that facilitates the interaction between OneSAF and a NBC contamination dispersion model. Afterwards, we implement a federation interface to share simulation data by publish-subscribe pattern and to translate them into the proprietary format for each model. We prove the possibility of federation between both models, as showing that dispersion of NBC contaminated cloud and changes in concentration are reflected in OneSAF-based engagement simulation.

• Environmental Engineering Research
• /
• v.11 no.2
• /
• pp.84-90
• /
• 2006

UV-catalytic oxidation technique was applied for the treatment of bio-refractory character of the leachate, which is generally present in the form of adsorbable organic halogens (AOX). Destruction of AOX was likely to be governed by pH adjustment, quantitative measurement of oxidants, and the selection of oxidation model type. Peroxide induced degradation ($UV/H_2O_2$) facilitated the chemical oxidation of organic halides in acidic medium, however, the system showed least AOX removal efficiency than the other two systems. Increased dosage of hydrogen peroxide (from 0.5 time to 1.0 time concentration) even did not contribute to a significant increase in the removal rate of AOX. In ozone induced degradation system ($UV/O_3$), alkaline medium (pH 10) favored the removal of AOX and the removal rate was found 11% higher than the rate at pH 3. Since efficiency of the $UV/O_3$ increases with the increase of pH, therefore, more OH-radicals were available for the destruction of organic halides. UV-light with the combination of both ozone and hydrogen peroxide ($UV/H_2O_2$ 0.5 time/$O_3$ 25 mg/min) showed the highest removal rate of AOX and the removal efficiency was found 26% higher than the removal efficiency of $UV/O_3$. The system $UV/H2O_2/O_3$ got the economic preference over the other two systems since lower dose of hydrogen peroxide and relatively shorter reaction time were found enough to get the highest AOX removal rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.681-691
• /
• 2017

This empirical study evaluated the 2016 Cheonan KIEMSTA(Korea International Exhibition of Machinery, Equipment, Science and Technology for Agriculture) based on an exhibitor's view. A total of 15 items of importance and performance were selected and 4 quadrants were analyzed for further analysis. The results revealed the following significant factors:concentration region with generating sales, exploring market opportunities in a new region, and meeting key decision makers; the Overkill region with collecting information regarding thecompetitor's product, demonstrating thecompany's capability, increasing staff's trade show experience, and training the sales teams; Low priority region with discovering new products, exploring export opportunities in a foreign market, and gaining an edge over competitors who are not exhibiting; and Keep up the work region bymaintaining relationships with existing customers, collecting market information, benchmarking competitor's position, introducing new product, and motivating sales people.

• Korean Journal of Poultry Science
• /
• v.33 no.2
• /
• pp.165-169
• /
• 2006

The objective of this study was to elucidate the basis for the difference in sperm production of broiler breeders. Nine sexually mature Hubbard broiler breeder males, 35 weeks of age, were trained for two weeks for semen collection on alternate days by abdominal massage technique. Following the training, the breeder males were collected daily for five successive days. The males were then classified as low or high sperm producers. The mean body weights of individual males were also recorded on the basis of body weight at the start and end of the experiment. Immediately after last collection the males were slaughtered and testes biometry was determined. Daily sperm output of individual males varied from $0.21{\times}10^9\;to\;2.64{\times}10^9$ sperm. The daily sperm production of low sperm producer males was lower ($0.47{\pm}0.13\;vs.\;2.06{\pm}0.20{\times}10^9$; P<0.05) than high sperm producer males. Testes weight of low sperm producer males was lower ($6.32{\pm}1.6\;vs.\;20.33{\pm}4.76\;gm$; P<0.05) than high sperm producer males. Moreover the testis weight of high sperm producer males was 3.22 times higher than low sperm producer males. The average body weight of high sperm producer males was higher ($4,389{\pm}116.3\;vs.\;3,960{\pm}131.77\;gm$; P>0.05) than low sperm producer males. The correlation coefficients indicate significantly positive correlation of body weight (P<0.05) and testes weight (P<0.01) on semen volume, sperm concentration and daily sperm production.

• Safety and Health at Work
• /
• v.8 no.2
• /
• pp.175-182
• /
• 2017

Background: With the recent rapid industrialization, occupational safety and health (OSH) has become an important issue in all industrial and human activities. However, incidents of injuries and fatality rates in the Ghanaian industry sector continue to increase. Despite this increase, there is no evidence regarding the element of OSH management in transport activities in Ghanaian industries. Thus, this study aims to examine the perceptions regarding the importance of safety and health in work-related transport activities in Ghanaian industries. Methods: A survey data collection technique was used to gather information on best safety practices over a 5-month period. We randomly selected 298 respondents from industries to answer structured questionnaires. The respondents included drivers, transport managers, and safety engineers. Standard multiple regression model and Pearson product-movement correlation were used to performed the analysis. Results: The result shows that for interventions to improve safety and health, concentration has been on drivers' safety practice with less attention to safe driving environments and vehicle usage. Additionally, the respondents are aware of the importance of OSH in transport activities, but the level of integration does not measure up to the standard to reduce operational accidents and injuries. Finally, strong commitment to changing unsafe practices at all levels of operations appears to be the effective way to improve safety situations. Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

• Composites Research
• /
• v.31 no.4
• /
• pp.145-150
• /
• 2018

Various structural health monitoring (SHM) systems have been suggested for aerospace industry in order to increase its life-cycle and economic efficiency. In the case of aircraft structure madden with metal, a major concern was hot spots, such as notches, bolts holes, and where corrosion or stress concentration occurs due to moisture or salinity. However, with the increasing use of composites in the aerospace industry, further advanced SHM systems have been being required to be applied to composite structures, which have much complex damage mechanism. In this paper, a method of acoustic emission localization for composite structures using Q-switched laser and multiple Amplifier-integrated PZTs have been proposed. The presented technique aims at localization of the AE with an error in distance of less than 10 mm. Acoustic emission simulation and the localization attempt were conducted in the composite structure to validate the suggested method. Localization results, which are coordinates of detected regions, grid plots and color intensity map have been presented together to show reliability of the method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.6
• /
• pp.458-467
• /
• 2016

Salt is the most important substance in physiological activities of the human body concerning transport of the ingested nutrients into the blood. Thus, the most ideal salt must not contain any harmful ingredients such as cadmium, mercury, lead, and arsenic. However, it is legal to include trace amounts of the hazardous ingredients in salt owing to a technical limitation, because salt is generally obtained from seawater. This paper reported an experimental result about a new method of manufacturing high-quality table salts without hazardous ingredients by using "$15^{\circ}C$ low-temperature vacuum drying technology," applied to the sequential extraction phenomenon of seawater with increasing the concentration. The world's best table salt can be produced if the present results are applied and extended to the traditional solar salt industry.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.3
• /
• pp.61-68
• /
• 2020

PURPOSE: The purpose of this study was to investigate the current state of rapid weight loss and physical and mental complaints among elite combat athletes who were selected and trained as national representatives. METHODS: A total of 127 combat athletes who had trained at the national training center in 2019 were enrolled. The questionnaire used as the survey tool was interpreted as words that Korean athletes could easily understand based on the Portuguese version of the 'Rapid Weight Loss Questionnaire' (RWLQ). χ² tests was performed to determine the differences in physical and mental changes according to sports and weight loss method. RESULTS: Combat athletes in Korea regularly undergo rapidly weight loss within a short period of time prior to competition. There were statistically similar results in terms of weight loss method, physical and mental changes and information about weight loss according to the sport. Weight loss methods often limit food and water intake and dehydrate. The physical complaints associated with them are symptoms such as "no energy", "dizziness", and "muscle spasms". The mental complaints include "irritability", "concentration loss" and "anxiety". These symptoms can be caused by side effects such as food intake limitation, water restriction and dehydration. Information sources for weight loss were in the order of "senior or colleagues", "supervisor or coach", and "Internet". No information was obtained from a doctor or dietitian. CONCLUSION: These results provide a baseline for predicting proper weight loss in athletes and provide useful information for developing performance enhancement as well as weight loss.