• 동력기계공학회지
• /
• 제14권3호
• /
• pp.71-76
• /
• 2010

The safety block which prevents drop of laborers at high altitude was analyzed by finite element method. Elastic analysis was done by Ansys ver. 11.0. and tetrahedral meshing was used. As load applied more vertically at the fixed face of saw tooth, the stress concentration became smaller and the load distributed broader. When load worked at saw tooth and the shape was more straight to the direction of load, most stresses except principal stress became smaller. When the area of the load increased, principal stress and equivalent stress could be decreased simultaneously. A principal stress and other various stresses occurred in 3D shape, therefore revised model which has smaller equivalent stress than other models shows excellence on the stability and the credibility.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.43-50
• /
• 2010

This study was carried out to evaluate the vertical stress properties in sandy soil according to changes of foundation condition in soil bin compacted three layers. The following conclusions and comparisons have been made based on careful analysis from theoretical and experimental methods. : When sandy soil subjected to circular uniform load, the vertical stress increments ($\Delta\sigma_z$) was increased as load increasing, the maximum values of $\Delta\sigma_z$ was achieved at the point loading axis, and $\Delta\sigma_z$ was not shown over at a distance of three times of loading plate width (B). The vertical stress increments were achieved largely at 80 % relative compaction (Rc) compared to 95 % relative compaction due to stress concentration in sandy soil. When sandy soil subjected to circular uniform load, the $\Delta\sigma_z$ differences between theoretical and experimental values as load increased were more increased and its maximum differences were achieved at stress axis. When gravel surface macadamized over sandy soil subjected to load, the $\Delta\sigma_z$ was concentrated to load axis as load increasing, so that macadamization will be decreased load transmission.

• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.9-14
• /
• 2009

Flow and pollution load were monitored at 2 combined sewer outlets (C-1 and C-2) of urban watersheds during dry weather from September, 2004 to April, 2006 for 20 months. The objectives were to investigate the diurnal variation of flow and pollutant load and to find the proper sampling time that could measure representative flow and pollutant load. Pollution load closed to the average daily load at C-1 could be measured at 00:00 hour and by the mean of 15:00 and 18:00 hour measures, and 15:00 and 21:00 hour measures, respectively. In addition at C-2, it was 21:00 hour and the mean of 15:00 and 18:00 hour measures. This study concluded that arbitrary sampling of flow and water quality could cause large errors in the estimation of urban pollution load and recommended that urban combined sewers should be monitored when flow and water quality showed daily average and concentration.

• 한국농공학회논문집
• /
• 제56권5호
• /
• pp.11-19
• /
• 2014

The objective of this research was to investigate concentration and load of nutrients such as total nitrogen (TN), nitrate nitrogen ($NO_3$-N) total phosphorous (TP), and phosphate phosphorous ($PO_4$-P) in a 23.4-ha paddy fields watershed with river water source. Water samples for irrigation water, drainage water, ponded water and groundwater were collected, and irrigation and drainage water were measured at 5~10 day intervals during normal days and at 2~6 hours intervals during three storm events. The amount of irrigation water in the study area was over 2,000 mm, which is almost identical to that in the area irrigated from a large reservoir but much more than that in the area irrigated from a pumping station. Mean flow-weighted concentrations of TN and TP in irrigation water were 2.8 and 0.15 mg/L, respectively, higher than those in the area irrigated from a large reservoir or a pumping station. The ratios of irrigation load to total inflow load for TN and TP were 88 %, and the ratios of surface outflow load to total outflow load for TN and TP were over 90 %, indicating that total nutrient load may be greatly affected by water management. The nutrient loads per area in the study area were estimated as TN 21.1 kg/ha and TP 1.1 kg/ha. Especially, the TP load per area in the study area was smaller than that in the area irrigated from a large reservoir or a pumping station. This may be because outflow load is not high likely due to sedimentation of particulate P and irrigation water load is high due to high TP concentration in irrigation water and high amount of irrigation water.

• 한국방재학회 논문집
• /
• 제6권1호
• /
• pp.83-95
• /
• 2006

본 연구는 강우시 소하천 수로구간에서 유사농도의 연직분포를 유사량 측정기 (ASM-IV)로 실측하여 그 특성을 분석하고자 한다. 이를 위해 충남 연기군 서면에 위치한 월하천 시점부분의 수로구간을 연구대상으로 선정하였다. 실측된 부유사농도의 분석자료는 상하류구간에서 각각 1시간 11분 30초 및 40분 32초 동안에 2초 간격으로 측정된 2,145개 및 1,216개중 16개씩의 시간구간 자료가 사용되었다. 분석한 결과, 상류구간의 실측치 Rouse 수는 $0.00129{\sim}0.02394$로 분포하고, 평균값은 0.01129로 나타났으며, 하류구간에서는 $0.00118{\sim}0.00822$, 평균값은 0.00436으로 하류의 값이 상류의 값보다는 훨씬 작게 분포하는 것으로 나타났다. 계산치 Rouse 수는 상류구간의 경우 $0.065115{\sim}0.065295$, 평균값은 0.06521로 나타났고, 하류구간의 경우에는 $0.057315{\sim}0.059109$, 평균값은 0.05795로 하류구간이 상류구간보다 약간 작은 값을 갖으나, 실측치 비교에서의 차이보다는 적게 나타났다. 그러나 실측치와 계산치의 비교에서는 상류구간보다 하류구간에서 더 큰 차이를 갖는 것으로 나타났는데, 이 오차는 하류구간의 침강속도 산정시 높은 수온에 대한 동점성계수 값을 본 연구에서 유도한 경험식으로 계산한 것도 원인중의 하나에 포함될 것이다.

• 한국물환경학회지
• /
• 제33권5호
• /
• pp.531-537
• /
• 2017

The biologic Oxygen Demand (BOD) is a reliable and generally accepted indicator of water pollution by organic pollutants. Accordingly, estimation of BOD export from paddies carries important implications fwith regard to water management in rural areas. In this study, hydrology and BOD concentration were monitored during the period 2008 through 2012, in an effort to understand the characteristics of BOD export from paddy fields. The findings demonstrated that BOD load by rainfall above 50 mm. occupied about 50 % of total load, whereas the load by less than ten mm. rainfall occupied about 29 % of the total load during periods of stormy activity. It therefore seems that it could be possible to reduce the BOD load up to 29 % during storm periods, when drainage control conducted for rainfall less than ten mm.(an amount which is relatively easy to manage). The documented mean loads of storm and non-storm were $17.1kg\;ha^{-1}\;yr^{-1}$ and $11.2kg\;ha^{-1}\;yr^{-1}$, respectively. The BOD load during the significant rainfall period was similar to the renewed unit load by NIER (2014). However, there were substantial differences between unit load and actual load when the non-storm load was incorporated into the BOD load estimation from paddy fields. In view of the foregoing, it is felt that, the non-storm load needs to be further considered and managed for the successful implementation of Total Maximum Daily Load (TMDL) program.

• 물과 미래
• /
• 제22권2호
• /
• pp.191-200
• /
• 1989

소류사의 입자이동속도와 소류사농도의 곱으로 소류사량을 계산할 수 있는 한 방법이 제시되었다. 본 연구에서 사립의 평균이동속도는 하상부근의 유속난류성분의 출현빈도가 정규분포 한다고 가정하고, 입자이동속도를 소류력의 함수와 하상부근의 평균유속의 곱으로 나타내었다. 소류사에 유효하게 작용하는 소류력을 구하기 위해서 Engelund가 제시한 식을 사용하여 유효마찰속도를 구하였으며 Engelund가 제시한 식의 적합성을 간접적으로 검증했다. 소류사농도를 구하기 위해서 호전·도상의 식을 사용하였다. 실험자료는 타 연구자들의 식과 비교되었으며 타 연구자들의 식과 비슷한 경향을 나타내었다. 소류력이 비교적 작은 경우를 제외하고 제시된 식에서 계산된 결과와 타연구자들의 자료는 잘 일치하였다.

• 물과 미래
• /
• 제29권2호
• /
• pp.129-141
• /
• 1996

일점연속 채취, 멱 속도 분포 및 Laursen의 토사농도 분포식을 이용한 총 부유 유사량 계산방법을 제안하였다. 이 방법은 미국 리오그안데 강에서 채취한 자료에 의해 검증되었다. 이 방법으로 계산된 농도분포는 $\beta$, $\kappa$, 그리고 w의 보편적인 값을 사용하여 계산한 보정 전수심 채취방법과 잘 일치하였다. 지역특성에 맞는 농도와 속도 분포식의 계수 x 와 z를 사용하였을 때는 더 좋은 결과를 얻을 수 있었다. 일점 채취에 사용한 이 방법과 일반적으로 많이 쓰는 전수심 채취를 사용한 방법과의 총 유사량의 차이는 채취때 생길 수 있는 오류 정도로 작은 것이었다. 일점 연속 채취에 의한 총 부유 유사량 측정은 여러 가지 중요한 이점을 가지고 있다. 채취 시간에 및 비용을 절감할 수 있으며 채취를 자주 할 수 있고 유사량 변화에 신속하게 대응할 수 명실상부 또한 이 방법은 미래에 추구해야 할 자동채취 방법으로 사용될 수 있다.

• 한국물환경학회지
• /
• 제29권3호
• /
• pp.400-408
• /
• 2013

Total phosphorus was set as a target indicator to prevent eutrophication and algae growth, etc., in three major rivers (Nakdong River, Geum River and Yeongsang/Seomjin River) for the second phase (2011 ~ 2015) in total maximum daily loads (TMDLs) system. However, total phosphorus management was restrictively introduced, i.e., upstream of the Lake Daechung, in the Geum River watershed. Total phosphorus concentration and trophic levels in downstream of the Lake Daechung (include Mangyeong and Dongjin rivers) were increased more than upstream. Therefore, it is necessary to expand total phosphorus management in all watersheds of the Geum River. If total phosphorus was managed in all area of the Geum River watershed, it is possible to decrease total phosphorus concentration and trophic levels, and solve the unbalanced water quality between up and downstream of the Lake Daechung.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.610-616
• /
• 2008

Oil-based nanofluids were prepared by dispersing Ag, graphite and carbon black nanoparticles in lubricating oil. Agglomerated nanoparticles were dispersed evenly with a high-speed bead mill and/or ultrasonic homogenizer, and the surfaces of the nanoparticles were modified simultaneously with several dispersants. Their tribological behaviors were evaluated with a pin-on-disk, disk-on-disk and four-ball EP and wear tester. It is obvious that the optimal combination of nanoparticles, surfactants and surface modification process is very important for the dispersity of nanofluids, and it eventually affects the tribological properties as a controlling factor. Results indicate that a relatively larger size and higher concentration of nanoparticles lead to better load-carrying capacity. In contrast, the use of a smaller size and lower concentration of particles is recommended for reducing the friction coefficient of lubricating oil. Moreover, nanofluids with mixed nanoparticles of Ag and graphite are more suitable for the improvement of load-carrying capacity and antiwear properties.