• 한국산업보건학회지
• /
• 제22권3호
• /
• pp.175-183
• /
• 2012

Objectives: This study developed a harmonized method for risk assessment based on the Hazard & Risk Evaluation of Chemicals (HREC) according to the Industrial Safety and Health Act (ISHA). Methods: Three preliminary studies, performed during 2010 and 2011 by the Occupational Safety and Health Research Institute and three academic research groups, were compared. The differences in risk assessment, especially in the dose-response assessment method, were analyzed. A new harmonized method for dose-response assessment was suggested and its applicability for the HREC was examined. Results: Considering the various steps of each dose-response assessment, the equivalent steps in quantitative correction, uncertainty factor 2 (UF2) for intra-species uncertainty, and UF3 for the experimental period in the uncertainty correction were relatively high. Using our new method, the total correction values (quantitative correction plus uncertainty correction) ranged from 72~15,789 to 30~60, and the ratio of the threshold limit value (TLV) to the reference concentration decreased from 12.8~1900 to 5.4~11.8. Furthermore, when we performed risk characterization by our new method, hazard quotient (HQ) values for chloroethylene, epichlorohydrin, and barium sulfate became 3.0, 14.1, and 1.13 respectively, whereas three previous studies reported HQ values of 7.1, 4580, and 87.3 considering reasonable maximum exposure (RME) conditions. HQs of the three chemicals were calculated to be 0.6, 2.4, and 0.1 respectively, when compared to their TLVs. Conclusions: Our new method could be applicable for the HREC because the total correction values and the ratio of TLVs were within reasonable ranges. It is also recommended that additional risk management measures be applied for epichlorohydrin, for which the HQ values were greater than 1 when compared with both reference values and the TLV. Our proposed method could be used to harmonize dose-response assessment methods for the implementation of risk assessment based on the HREC according to ISHA.

• 한국대기환경학회지
• /
• 제18권5호
• /
• pp.345-353
• /
• 2002

A study of polydispersed aerosol dynamics by Electrostatic Precipitator (ESP) was carried out. The log-normal particle size distribution was assumed and moment method was considered. In order to apply moment method in Deutsch-Anderson equation, Cunningham slip correction factor and Cochet's charge equation were simplified for certain range of particle size. The three parameters, which explain the particle size distribution, such as total number concentration, geometric mean diameter, and geometric standard deviation were considered to derive the analytic solution. The obtained solution was compared with available numerical results (Bai et al., 1995). The comparison of the numerical and analytic results showed a good agreement.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.37-42
• /
• 2014

In this study, non-load-carrying fillet welded joints fabricated using EH grade-steel are evaluated with the structural stress approach. The thickness effect was investigated by a study on welded steel joints with thickness ranging from 25 to 80mm. As-welded joint for main plate thickness of 25 to 80mm, the fatigue strength is reduced gradually. On the other hand, in case of main plate thickness of 25 to 80mm, the structural stress concentration factor increases gradually. As a result, for structural stress approach, thickness effect is not required for correction. Based on these results, a new evaluation fillet welded joint for fatigue design purposes has been proposed FAT 125.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.462-468
• /
• 2022

The selection and effective utilization of peak-fitting software for conventional gamma-ray spectrum analysis is significant for accurate determination of the mass fraction of elements, particularly in complex peak regions. Majority of the peak-fitting programs can derive similar peak characteristics for singlet peaks, but very few programs can deconvolute multi-peaks in a complex region. The deconvolution of multi-peaks requires special peak-fitting functions, such as left and right-skew distributions. In the this study, 843.76 keV (²⁷Mg) peak area from the complex region (840 keV-850 keV) determined and compared using four different peak-fitting programs, namely, GammaVision, Genie2000, HyperLab, and HyperGam. The 843.76 keV peak interfered with 841.63 keV (^152mEu) and 846.81 keV (⁵⁶Mn). The total Mg concentration was determined through k₀-instrumental neutron activation analysis by applying the isotopic interference correction factor ²⁷Al(n,p)²⁷Mg through the simultaneous determination of Al concentration. HyperLab and HyperGam peak-fitting programs reported consistent peak areas, and resultant concentrations agreed with the certified values of matrix-certified reference materials.

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.90-95
• /
• 1996

This study was performed to calculate the degration rate coefficient, operating parameters to meet the effluent standards, and the temperature adjustment coefficients to each parameter of pollution by seasonal variation of concentration and temperature of influent in livestock wastewater treatment by sequencing batch reactor process in field scale. The followings are the conclusions that were derived from this study. 1. In the field, temperature of livestock wastewater in reactor was 20.3$\circ$C in summer and 6.0$\circ$C in winter. The ratio of BOD:TKN: T-P in influent was 100:80:7. BOD loadings in winter and spring were 0.26 and 0.43 kg $BOD/m^3$ day, respectively. Those in summer and fall were 0.25 and 0.13 kg $BOD/m^3$ day, respectively. 2. The degradation rate coefficient for TKN was larger in summer and fall in which temperature was high than that in which temperature was high than that in winter and spring in which concentration was high. On the contrary, the phosphorus uptake rate was larger in winter and spring than that in summer and fall. 3. The hydraulic retention time in winter and spring was longer than that in summer and fall. Especially, in order to meet the standard for TKN of 120 mg/l in winter in which temperature of wastewater was 6.0$\circ$C, as the MLSS concentration was increased from 4, 000 to 7, 000 mg/l, the hydraulic retention time was increased from 212 to 121 hours. But, in order to shorten that less than 121 hours for the economical wastewater treatment, countermeasure to increase temperature of wastewater in the reactor should be considered. 4. the temperature adjustment coefficients for BOD, $COD_{Mn}$, TKN and T-P were 1.0241, 1.0225, 1.0541 and 1.0495, respectively. Namely, the treatment of TKN was most sensitively affected by temperature. For the purpose of the effective removal of nitrogen and phosphorus which are sensitive to temperature, it is necessary to keep the temperature of livestock wastewater more than 20$\circ$C which is the temperature of it in summer.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.225-233
• /
• 2001

Oxygen flooding을 이용한 Secondary ion Mass Spectrometry(SIMS) 분석에 있어서 표면에 산화막이 있을 때 발생하는 SIMS depth profile의 왜곡현상에 대한 원인을 분석하고 이를 보정하였다. 이러한 왜곡현상은 표면 산화막에서와 Si 매질에서의 sputter rate이 다른 데서 발생하는 깊이 보정 오류와 상대감도인자(relative sensitivity factor, RSF)가 다른 데서 발생하는 농도보정 오류로부터 발생됨이 밝혀졌다. 깊이보정 오류를 바로잡기 위하여 $N^a+$ 이온을 산화막과 Si 매질의 계면에 대한 marker로 사용하였으며 산화막 두께는 SEM 및 XPS로 측정하였다. 산화막과 Si 매질에서의 sputter rate 및 RSF의 차이는 주로 oxygen flooding이 유발한 산화막 형성시의 부피팽창에 의한 것으로 해석되었으며 이를 보정한 depth profile은 oxygen flooding없이 분석한 경우와 거의 동일한 결과를 보여주었다.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.695-705
• /
• 2012

Objectives : The purpose of this study is to evaluate the appearance of having relationship between the exposure to lead and cadmium and the dental caries targeting adults in the Republic of Korea. Methods : The study was designed as a cross-sectional study, using the data of the Fourth Korea National Health and Nutrition Examination Survey. The subjects as 1,966 people, who were confirmed the appearance of dental caries among 1,991 people of having been offered the heavy-metal concentration in blood. Statistical analysis was conducted using SPSS 19.0, according to complex sampling design. Results : As a result of multi-variate analysis on factors of dental caries, in Model I without correction, the gender, age, educational level, appearance of lifelong smoking, daily toothbrushing frequency, appearance of using dental floss, and subjective oral health status were recognized as important factors. In Model II with correction of gender and age, the educational level, daily toothbrushing frequency, and subjective oral health status were recognized as statistically significant factors. In Model III with correction of all factors, the gender, age, educational level, appearance of using dental floss, and subjective oral health status were functioning as statistically significant factors. As a result of statistically analyzing relationship between the exposure to lead and cadmium and the dental caries targeting adults, it was analyzed that there is no significant correlation. However, in case of lead, the tendency of being grown the cross ratio of dental caries could be examined in model I, which didn't correct disturbance factor, model II, which corrected gender and age, and model III, which corrected all variables of disturbance factor. Conclusions : The exposure to lead and cadmium was indicated to have no relationship with adults' dental caries. However, a continuous research of relationship was considered to be necessary by using Korea National Health and Nutrition Examination Survey, which is surveyed in the future.

• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.40-71
• /
• 1986

By developing a computer program for the systematic design of worm gears, the design formulae and tables of AGMA, JGMA, BS and DIN are analized and compared. The computer program can be used on micro-computers. According to the input data of the reduction ratio, the center distance. the driving torque and the material as design parameters, the program calculate the most efficient worm gear dimension. The variation of the design parameters and other empirical coefficients in case of resulting an inadequate design gear dimension can be easily modified throuth the way of interactive method between the user and the monitoring system of computer. A proposal of the standardization of worm gears was made in which a standard module according to the DIN 323 standard series number was applied. For the more exact and effective calculation of the stress concentration and the deformation of gear teeth, a computer program using the boundary element method is also developed. Even the strength of the special gear shape such as Niemann's "Cavex" gear can be calculated in a short CPU-time. The most effort of this study has been layed on the developing a computer program for the correction of a tooth profile and face width which is most important design factor for an exact and wide teeth contacts under loads, especially by great and wide gears. For this purpose were investigated the tooth stiffness, the mesh interferences and the kinematics and the dynamics of gear mesh. The deflection and the deformation of the gear shaft due to the loads acting on gear and shaft were aslo considered. Some examples have shown the sufficient good status of teeth contact in which the correction of the tooth profile and face width were accomplished due to the calculated results.d results.

• Preventive Nutrition and Food Science
• /
• 제14권4호
• /
• pp.310-315
• /
• 2009

The partitioning behavior of the five printing ink solvents in nine lab-made cookies with various sugar and water content at 25${^{\circ}C}$ was studied to find out the presence and effects of interaction between the two ingredients on partitioning behavior in cookies. Solvents were ethyl acetate, hexane, isopropanol, methyl ethyl ketone and hexane. It was observed that the partition coefficient (the solvent concentration in food compared to that in air, Kp) decreased as sugar increased in all case and increased as water content increased for all compounds except toluene. Statistical analysis by the F-test method was used to determine the significance of sugar-water interactions, as well as other single factors on partitioning behavior of each solvent. Sugar content alone had no significant effects, but the crystallinity of sugar, as changed by water content, affected the partitioning behavior of the five solvents significantly. Parameter estimation for each significant factor by SAS program yielded a regression equation, which was used to predict the partitioning behavior in the finished cookie. Kp values from the regression equation could be determined more precisely by applying a correction term for the interaction between sugar and water to the Kp values of each ingredient after baking.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4382-4394
• /
• 2023

Passive auto-catalytic recombiners (PARs) are widely used to mitigate a hydrogen hazard. The first step to evaluate the hydrogen safety by PARs is to obtain qualified test data of the PARs for validation of their analytical model. SPARC PAR tests SP8 and SP9 were conducted to evaluate the hydrogen recombination characteristics of a honeycomb-shaped catalyst PAR. To obtain the hydrogen recombination rate from the PAR test data, two methods, Method-1 and Method-2, introduced by the THAI project, were applied. Since a large gradient of hydrogen concentration developed during hydrogen injection can cause a large error in the hydrogen mass obtained by integrating the measured hydrogen concentrations, a gate was installed at the PAR inlet to homogenize hydrogen in the test vessel before the PAR operation in the tests. A computational fluid dynamics (CFD) code with a PAR model was also applied to evaluate the characteristics of the PAR recombination according to the PAR inlet conditions, and the results were compared with those from Method-1 and Method-2. It was confirmed that the recombination rates from Method-1 require a correction factor to be compatible with results from Method-2 and the CFD simulation in the case of the SPARC-PAR tests.