• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.39-45
• /
• 2006

This paper introduces a preliminary work for the design of a mini-dish cluster system for power generation. Each mini-dish [typically has a 20 to 30 cm in diameter] is designed with a simple parabolic profile concentrating sun light [after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning] onto a centrally located small plane[or concave] mirror which is placed on the bottom side of a transparent glass cover. The mirror with a mini-dish concentrator is designed to focus beam radiation onto a focal point before it enters a bundle of optical fibers connected to a remote receiver for power generation. Different options are considered in designing a mini-dish concentrator to maximize its effectiveness for the collection and use of solar energy.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.41-46
• /
• 2016

An optical method to measure the three-dimensional (3D) shape of a surface with specular reflection is proposed. The proposed method is based on the analysis of the geometric path of the light from a point source, and the relative displacements of points in the reflection image. The 3D shape of a concave mirror is shown to be determined approximately via experiments, where the vision system consists of LED array illumination, a half-mirror, and an imaging sensor.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.13-19
• /
• 2015

In this paper, the principle of devices which can magnify images without distorting the images is described. When the device is put on a smart phones, viewers can see the magnified images. Magnified images can be few 100 times bigger than the original images. Therefore, viewers can see movie theater size images with the device put on a smart phone. Two different schemes are explained in the paper and one realization of the device is presented. The device can be used in many different application areas.

• Korean Journal of Acupuncture
• /
• v.27 no.4
• /
• pp.1-4
• /
• 2010

Objectives : The purpose of this study is to summarize the historical aspects of parabolic reflector moxa and to suggest the applications of light moxibustion in Korean medicine. Results : Getting a fire by parabolic reflector(concave mirror) is well known because of the Olympic torch lighted with a solar reflector in Greece. From anecdotes or myths for Diocles and Archimedes(third century B.C.) a long history has been chronicled in books and films in western culture. However, it has another history in Asian countries since 2,000 years ago. Some reflectors had a tiny size with 6.5 to 10 cm in diameter, 4 mm to 1 cm thickness, and these mobile handheld devices could make us guess that they have been used for multiple purposes. Bronze reflectors were described in Dongeui-bogam, and excavated from the ancient remains of the Shilla and Koryo dynasties. This common firing device was used as a moxibustion device, one of the acupuncture and moxibustion modalities in traditional Korean medicine. Conclusions : Reflector moxa has been used as a light moxibustion to deliver heat energy to acupuncture points, muscles, and skin along meridians. We present a plausible proposal to improve other phototherapy modalities including reflector moxa in Korean medicine practice.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.447-454
• /
• 2006

We obtained analytic solutions of boundary conditions to the stable region of Z-fold $Cr^{4+}$ : YAG laser cavity when the conditions are with and without thermal tensing effect. Also we investigated the influence of the thermal tensing effect on the stability of cavity, beam waist, and astigmatic compensation using aberration transformation matrices. The thermal tensing effect almost has no influence on the stable region of the cavity when the crystal is located in the middle of two concave mirrors and when the distances from the concave mirror to the reflecting mirror and the output coupler are the same. The beam waist, however, is affected more in a tangential plane than in a sagittal plane, and so it is difficult to have astigmatic compensation when the thermal tensing effect exists. This result means that the thermal tensing effect should be considered even for the Kerr-lens mode-locking.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.314-322
• /
• 2021

A reflecting telescope consists of a concave primary mirror and a convex secondary mirror. The primary mirror is easy to measure, because it converges the beam from an interferometer, while the secondary mirror diverges the beam and so is not easy to measure, even though it is smaller than the primary mirror. In addition, the Korsch-type telescope uses the central area of the secondary mirror, so that the entire area of the secondary mirror needs to be measured, which the classical Hindle test cannot do. In this paper, we propose a double-stitching method that combines two separate area measurements: the annular area, measured using the Hindle stitching method, and the central area, measured using a spherical wave from the interferometer. We test the surface error of a convex asphere that is 202 mm in diameter, with 499 mm for its radius of curvature and -4.613 for its conic constant. The surface error is calculated to be 19.5±1.3 nm rms, which is only 0.7 nm rms different from the commercial stitching interferometer, ASI. Also, the two results show a similar 45° astigmatism aberration. Therefore, our proposed method is found to be valuable for testing the whole area of a convex asphere.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.6
• /
• pp.491-497
• /
• 2016

This study aims to develop a vision inspection system for screw threads. To inspect external defects in screw threads, the vision inspection system was developed using front light illumination from which bright images can be obtained. The front light system, however, requires multiple side images for inspection of the entire thread surface, which can be performed by omnidirectional optics. In this study, an omnidirectional optical system was designed to obtain annular images of screw threads using an image sensor and two reflection mirrors; one large concave mirror and one small convex mirror. Optical simulations using backward and forward ray tracing were performed to determine the dimensional parameters of the proposed optical system, so that an annular image of the screw threads could be obtained with high quality and resolution. Microscale surface defects on the screw threads could be successfully detected using the developed annular inspection system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4108-4114
• /
• 2015

An image acquisition by using an optical mirror is called as a catadioptric method. The catadioptric imaging method is generally used for acquisition of 360-degree all directional visual information in an image. An exemplar omnidirectional optical mirror is the bowl-shaped hyperbolic mirror. In this paper, a single camera omnidirectional stereo imaging method is studied with an additional concave lens. It is possible to obtain 3 dimensional coordinates of environmental objects from the omnidirectional stereo image by matching the stereo image having different view points. The omnidirectional stereo imaging system in this paper is cost-effective and relatively easy for correspondence matching because of consistent camera intrinsic parameters in the stereo image. The parameters of the imaging system are extracted through 3-step calibration and the performance for 3-dimensional coordinates reconstruction is verified through experiments in this paper. Measurable range of the proposed imaging system is also presented by depth-resolution analysis.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.41-46
• /
• 2008

Generally optical components are fabricated by grinding, lapping and polishing processes. Those processes take long time to obtain optical high surface quality. In the case of large optical components, the on-machine measurement is strongly recommended because the workpiece is fragile and difficult to set up for fabricating and measuring. This paper is concerned about a swing-arm mechanism which can be used for on-machine measurement of a surface profile with a sensing probe end-effect, and also for grinding or lapping the surface with a corresponding tool. The measuring accuracy and uncertainty using a swing arm type profilometer have been studied. The experimental results show that this method is useful specially in lapping process with the accuracy of $5{\mu}m$. Those inspection data are provided for correcting the residual figuring error in next processes.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.151-155
• /
• 1998

A new Fabry-Perot tunable filter has been built with simple construction, which does not require any additional aligning and/or beam-confining components for the reduction of the diffraction loss. For this feature, one of the two fibers for the filter is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. After high reflection coatings, the two fibers are aligned to result in an FP filter whose bandwidth, free spectral range, and insertion loss is 1.47nm, 52nm, 5.6dB respectively.