• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.543-552
• /
• 2000

The purposes of this study were to evaluate the reproducibility of posteroanterior(PA) cephalograms obtained by two methods, the Head Posture Aligner(HPA) method in natural head posture and the conventional method(operator-guided method), and to compare the vertical rotational differences of the head Posture between lateral and PA cephalograms according to the method. The sample was consisted of 30 adults. At first day, a PA cephalogram and a lateral cephalogram were obtained from each subject by two methods to investigate the difference of vertical rotational posture between lateral and PA cephalograms. Two weeks later, another PA cephalogram was obtained using each method to evaluate the reproducibility of head posture. Five height measurements and nine width measurements were used in the paired t-test to compare the reproducibility of the PA cephalometric measurements between two methods. The differences of vertical rotational posture between lateral and PA cephalograms were calculated from a computer program and compared according to the method used, and following results were obtained. 1. Height measurements obtained by operator-guided method showed significant differences according to the time interval and revealed low reproducibility. 2. Height measurements obtained by HPA method did not show significant differences according to the time interval and presented high reproducibility. 3. In the comparison of width measurement, two methods did not show distinct differences in reproducibility. 4. The difference of vertical rotational posture between lateral and PA cephalograms showed $0.8^{\circ}$ in the HPA method, more less than $2.5^{\circ}$ in the operator-guided method. The results of the present study suggest that the HPA may be helpful in the PA cephalometric radiography in terms of reproducibility.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.8 no.1
• /
• pp.5-11
• /
• 1997

To set up an objective basis for the evaluation of the stroboscopic findings, video-strobolaryngoscopic images of vocal fold vibration in 5 female and 5 male normal speakers were analyzed using an image analysis computer program called KSIP(Kay Storoboscopy Image Processing, Kay Elemetrics Corp., NJ, USA). Four consecutive vibratory cycles were compared in comfortable, louder, high-pitched /ee/ phonation for every subject. findings mostly replicated earlier studies including glottal chinks which were observed in most female speakers throughout the cycles and clear distinction between female and male speakers in their vibratory patterns as well as intensity and frequency-re-lated differences. However, there were some findings incompatible with those from previous studies which may be attributable to technical problems. This study may provide an objective basis of the stroboscopic findings such as image shape, amplitude, area, and their changes according to frequency and intensity variations. We anticipate that funker study with larger samples ran provide an objective criteria for normal vibratory characteristics of the laryngostro-boscopic findings.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.1
• /
• pp.39-48
• /
• 2005

According to traditional 2D animation techniques, anticipation makes an animation much convincing and expressive. We present an automatic method for inserting anticipation effects to an existing facial animation. Our approach assumes that an anticipatory facial expression can be found within an existing facial animation if it is long enough. Vertices of the face model are classified into a set of components using principal components analysis directly from a given hey-framed and/or motion -captured facial animation data. The vortices in a single component will have similar directions of motion in the animation. For each component, the animation is examined to find an anticipation effect for the given facial expression. One of those anticipation effects is selected as the best anticipation effect, which preserves the topology of the face model. The best anticipation effect is automatically blended with the original facial animation while preserving the continuity and the entire duration of the animation. We show experimental results for given motion-captured and key-framed facial animations. This paper deals with a part of broad subject an application of the principles of traditional 2D animation techniques to 3D animation. We show how to incorporate anticipation into 3D facial animation. Animators can produce 3D facial animation with anticipation simply by selecting the facial expression in the animation.

• 대한공업교육학회지
• /
• v.30 no.1
• /
• pp.106-119
• /
• 2005

Many problems with the offline class, which is the traditional education type in corporations or universities, were indicated and people hoped that e-learning, which is web-based instruction, would solve these problems. However, e-learning also has weak points in that it should be self-paced and media-based in many ways. Therefore, when considering the good and weak points of offline classes and e-learning, blended learning seems to be necessary. Until now, blended learning has usually been used in corporations, and there have been almost no studies on the effectiveness or management of blended learning in universities. Thus, in this study, I would like to design blended classes, manage them at the level of university classes, and verify the effectiveness of blended classes, by comparing academic achievement, student participation, and student satisfaction. The subject students who signed up for Computer & Technology at C University in 2005 were divided into three study groups: offline class, online class, and blended class. The offline class was taught using the traditional class teaching method. For the online class and the blended class, multimedia contents were developed and a different LMS was used. The results of 13 weeks of teaching are as follows. For the academic achievement in the offline, online and blended classes, there was no statistically significant difference (f=2.387, p=.096). But when comparing the average achievement, the average of the blended class was higher than that of the other classes, so that it can be said that the blended class has positive effects on academic achievement. Second, when comparing the learners' participation in the online class and the blended class, the total posts were 85 and 138 respectively, which shows a considerable difference. The hit counts for each post in the online class and the blended class are 10 and 20, respectively. Moreover, the login counts for subjects are 3 in the online class and 4 in the blended class. In the questionnaire for the students' academic satisfaction in the online class and the blended class, all of the 15 items showed higher satisfaction in the blended class. Considering all these results, if adequate media are properly combined, the blended class is better than either the pure online class or the pure offline class.

• The korean journal of orthodontics
• /
• v.16 no.1
• /
• pp.85-106
• /
• 1986

The purpose of this investigation was to know the means of the T.M.J. space and to compare spational differences in centric relation and centric occlusion by the T.M.J. Tomogram and to study the correlation between the articular eminence slope and the lingual surface slope of the maxillary central incisor by the Cephalogram in near normal occlusion subjects. These results could give contribution for the diagnosis of orthodontic treatment and T.M.J. dysfunction and the assessment of orthopedic treatment and orthognathic surgery. 44 young adults (28 men and 16 women, 21 to 27 years of age) were selected from the Dental students in Yonsei Univ. Criteria for selection was normal occlusion, no clinical signs and T.M.J. dysfunction, no history of orthodontic treatment, and no missing tooth. After submental vertex view analysis. each subject was given the T.M.J. Tomogram in centric relation and centric occlusion and the Cephalogram was given with Quint Sectograph. All data was recorded and statistically processed with the CYBER computer system. Results were analyzed: the following findings and conclusions were derived. 1. The mean value for the combined right and left anterior joint space was 2.549mm, the posterior space was 2.260mm, and superior space was 3.31mm in centric relation. The anterior space was 2.316mm, posterior space was 2.474mm, and superior space was 3.435mm in centric occlusion. 2. In the centric relation position, both condyles were placed more posterioly and superioly in their fossae than in the centric occlusion position by the spatial difference. 3. In the centric occlusion position, both condyles were more symmetrically placed in their fossae with equal anterior-posterioly rather than in the centric relation position. 4. The mean articular eminence angle was $48.19^{\circ}$ and the mean fossa height was 7.911mm. A strong positive correlation between the articular eminence angle and fossa height in T.M.J. Tomogram was found. 5. In Cephalometric analysis, there was a strong positive correlation between the articular eminence slope and the lingual surface slope of the upper central incisor to the FH plane, occlusal plane, and S-N plane. 6. There was moderate positive correlation between the S-E measurements and the fossa height, articular eminence angle, and DcGn < F-H.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.05a
• /
• pp.410-418
• /
• 2000

In general, the experienced diver go into the water to find out Pan Shell which is spontaneously generated and brought up at the depth of 25-30 meters in the slime along the bank of an inlet of western and southern sea. However, this searching system has caused some problems in terms of economical efficiency and riskiness of diver. To overcome such problems and enhance the competence capability of fishermen, a new Pan Shell searching system is required. If an onboard searching system as a substitute of the way of diving into the deep water to identify the existence of Pan Shell is developed, it would be greatly beneficial to fishermen. The purpose of this research is to develop a new searching system of Pan Shell by making use of 50-200 Khz Ultra Sonic Signal, A/D Converter and computer process program. Based on the fact that Sonic Signal between the soft part of slime and the hard part of sand, pebble and Pan Shell is different, the possibility of this system have been approved in some degree by this time of research. However, to utilize this new system, further research on the establishment of data base and sample data is required. With the theoretical knowledge, the systematic research on the searching capability of Ultra Sonic Signal will be continued to identify the influence against the sea water subject. In this research, signal will be analyzed according to the influence range, power and sensitiveness of Ultra Sonic Generator. In addition, the radius of Ultra Sonic Signal will be included. The experimental field work will be executed at Nockdong, Pulkyo and other places well known as a habitat of Pan Shell.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2661-2667
• /
• 2013

Recently, at Home and abroad, Internet of Things era things(Thing) is participating as a subject of communication in human communication paradigm of existing (lot/M2M) is in full swing. Automobile, refrigerator, bicycle, until shoes, and communication functions generation of information is installed and has created a fusion of new service IT infrastructure. Its use and application are broadening to various areas and the number of devices used for it is increasing to increase the number of information transmitted for each object. When the traffic reaches its limit while each set of data is transmitted from the devices divided into each group through the mobile network, M2M communications service might not be processed smoothly. This study used the Knapsack Problem algorithm to create a virtual simulator for a smooth M2M service when the mobile network used for the M2M communications reaches its limit. The virtual simulator applies smooth processing of services from the M2M communications that should be processed first to other subsequent services when data comes to each group of devices. As the M2M technology develops to make many objects more compact in size, it would help with smoother processing of M2M services for the mobile network with fast-increasing traffic.

• Women's Health Nursing
• /
• v.1 no.1
• /
• pp.5-27
• /
• 1995

One of the important tasks for new parents, especially mothers, is to establish warm, mutually affirming interpersonal relationships with the new baby in the family, with the purpose of promoting the health development of the child and the well-being of the whole family. Nurses assess the quality of the behavioral characteristics of the maternal-infant interaction. The purpose of this longitudinal descriptive correlational study is to investigate the changes of the mother - infant interactions from postpartum 1 day to postpartum 8weeks of the transition to parenthood. The aim was to contribute to the development of theoretical under standing on which to base care toward promoting the quality of maternal - infant interaction. Data were collect ed directly by the investigator and at rained from Jul, 1, 1990 to Jun 8, 1991, Subjects were a random sample of 44 mothers, 44 who had a normal delivery (but with out other perinatal complications) at four general hospitals in Seoul. Instruments used were the Stainton Parent-infant Interaction Scale (1981). The first observations were made in the delivery room, followed by day 1, day 2, day 3 and 2 weeks, 4 weeks, 6 weeks and 8 weeks after, birth, for a total of 8 contacts. Observations in the hospital were made during the hour prior to scheduled feedings. The infant was placed beside the mother. Later contacts were made at home. Data analysis was don by computer using as SPSS program and included, Paired t-test, t-test and Pearson Correlation coefficient ; the results were as follows. 1. The daily maternal-infant interaction score for the initial contact ofter birth to 8 weeks postpartum had the lowest average score 5.21 and the highest 8.02(in a range of 0-10). This subject group of mothers needed Extra nursing supporting to promote their maternal-infant interaction. 2. The daily scores for the maternal-infant interaction tended to rise, showing a gradual improvement over the period of eight weeks. However, there were significantly different increases in maternal-infant interaction only from the first to second day (p=0.000) and from the fourth to sixth weeks ofter birth.(p=0.000) 3. When the seven items of maternal-infant interaction were evaluated items of maternal-infant inter action were evaluated separately, "Care taking for the baby" had the highest average score, 1.60(in a range of 0-2) and "Speaks to baby" the lowest, 0.8. All items, suggested the subjects' need of nursing intervention to promote maternal-infant interaction 4. There were positive correlations between certain general characteristics, namely, both a higher economic status (p=0.027) and breast feeding (p=0.021) and maternal-infant interaction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.1009-1019
• /
• 2017

Mobile Edge Computing(MEC) is a emerging technology to cope with mobile traffic explosion and to provide a variety of services having specific requirements by means of running some functions at mobile edge nodes directly. For instance, caching function can be executed in order to offload mobile traffics, and safety services using real time video analytics can be delivered to users. So far, a myriad of methods and architectures for personalized service recommendation have been proposed, but there is no study on the subject which takes unique characteristics of mobile edge computing into account. To provide personalized services, acquiring users' context is of great significance. If the conventional personalized service model, which is server-side oriented, is applied to the mobile edge computing scheme, it may cause context isolation and privacy issues more severely. There are some advantages at mobile edge node with respect to context acquisition. Another notable characteristic at MEC scheme is that interaction between users and applications is very dynamic due to temporal relation. This paper proposes the local service recommendation platform architecture which encompasses these characteristics, and also discusses the personalized service recommendation mechanism to be able to mitigate context isolation problem and privacy issues.

• Science of Emotion and Sensibility
• /
• v.18 no.2
• /
• pp.45-54
• /
• 2015

This study carried out an experiment to identify subject's work effectiveness and energy saving effect using LED light. Towards this end, this study configured nine various lighting environments in order to control PWM (Pulse Width Modulation) and illuminance (lux), which are the characteristics of LED light. The PWM ratio of LED light was set as R:G:B=1:1:1, R:G:B=4:1:5, and R:G:B=8:7:7, respectively, and illuminance (lux) was set as 400 lx, 700 lx, and 1000 lx, respectively. In addition, the indoor environment was set temperature $20-24^{\circ}C$, humidity 50%-60%, and the amount of clothing 1. This study analyzed work effectiveness and energy consumption in nine lighting environments, each. Error correction was performed for work effectiveness analysis, and cumulative power consumption was measured in each lighting environment for energy consumption analysis. According to experiment results through the lighting environments suggested in this study, accuracy and spent time effectiveness were good in 700lux and higher than 400lux. For spent time, the best effectiveness was revealed in the suggested PWM ratio, R:G:B=8:7:7. The lowest power consumption on each illuminance (lux) was revealed in the order of R:G:B=8:7:7, RGB=1:1:1, and R:G:B=4:1:5. Therefore, pulse-width modulation effect is proposed in this paper was found to affect the efficiency and energy saving.