• Advances in aircraft and spacecraft science
• /
• v.4 no.5
• /
• pp.503-514
• /
• 2017

The attitude control of an aircraft is usually fulfilled by means of thrusters at high altitudes. Therefore, the possibility of using also aerodynamic surfaces would produce the advantage of reducing the amount of fuel for the thrusters to be loaded on board. For this purpose, Zuppardi already considered some aerodynamic problems linked to the use of a wing flap in a previous paper. A NACA 0010 airfoil with a trailing edge flap of 35% of the chord, in the range of angle of attack 0-40 deg and flap deflections up to 30 deg was investigated. Computer tests were carried out in hypersonic, rarefied flow by a direct simulation Monte Carlo code at the altitudes of 65 and 85 km of Earth Atmosphere. The present work continues this subject, considering the same airfoil and free stream conditions but two flap extensions of 45% and 25% of the chord and two flap deflections of 15 and 30 deg. The main purpose is to compare the influence of the flap dimension with that of the flap deflection. The present analysis is carried out in terms of: 1) percentage variation of the global aerodynamic coefficients with respect to the no-flap configuration, 2) increment of pressure and heat flux on the airfoil lower surface due to the Shock Wave-Shock Wave Interaction (SWSWI) with respect to the same quantities with no SWSWI or in no-flap configuration, 3) flap hinge moment. Issues 2) and 3) are important for the design of the mechanical and thermal protection system and of the flap actuator, respectively. Under the above mentioned test and geometrical conditions, the flap deflection is aerodynamically more effective than the flap extension, because it involves higher variation of the aerodynamic coefficients. However, tests verify that a smaller deflection angle involves the advantage of a smaller increment of pressure and heat flux on the airfoil lower surface, due to SWSWI, as well as a smaller hinge moment.

• Journal of Nutrition and Health
• /
• v.27 no.8
• /
• pp.856-863
• /
• 1994

To develop a optimized method for educing the errors associated with the estimation of portion size of foods, fuzzy-dta processing of portion size was performed. Cooked-rice was chosen as a food item. The experiment was conducted in two parts. First, to study the conceptions of respondents to bowl size(large, medium, small), 11 bowls of different size and shape were used and measured the actual weights of cooked-rice. Second, to study the conceptions of respondents to volume(1, 1/2, 1/3, 1/4), 16 different volumes of cooked-rice in bowls of same size and shape were used. Respondents for this study were 31 graduate students. After collecting the data of respondents to size and volume, fuzzy sets of size and volume were produced. The critical values were calculated by defuzzification(mean of maximum method, center of area method). The differences of the weights of cooked-rice in various bowl size and volume between the critical values and the calculated values by average portion size using in conventional methods were compared. The results hows large inter-subject variation in conception to bowl size, especially in large size. However, conception of respondents to volume is relatively accurate. Conception to bowl size seems to be influenced by bowl shape. Considering that the new fuzzy set was calculated by cartesian product(bowl size and volume), bowl shape should be considered in estimation of bowl size to make more accurate fuzzy set for cooked-rice portion size. The limitations of this study were discussed. If more accurate data for size and volume of many other food items are collected by the increased number of respondents, reducing the errors associated with the estimation of portion size of foods and rapid processing will be possible by constructing computer processing systems.

• Journal of The Korean Association of Information Education
• /
• v.9 no.4
• /
• pp.673-684
• /
• 2005

In this research, we have developed a "computer tutor" that mimics the human tutor with animated tutoring dialog agent and the agent was integrated to teaching-learning material for elementary science subject. The developed system is a natural language based teaching-learning system using one-to-one dialogue. The developed pedagogical dialogue teaching-learning system analysis student's answer then provides appropriate answer or questions after comparing the student's answer with elementary school level achievement. When the agent gives either question or answer it uses the TTS(Text-to-Speech) function. Also the agent has an animated human tutor face for providing more human like feedback. The developed dialogue interface has been applied to 64 6th grade students. The test results show that the test group's average score is higher than the control group by 10.797. This shows that unlike conventional web courseware, our approach that "ask-answer" process and the animated character, which has human tutor's emotional expression, attracts students and helps to immerse to the courseware.

• Journal of Korean Public Health Nursing
• /
• v.6 no.1
• /
• pp.15-24
• /
• 1992

This study was conducted to follow the patient referral system operated from the primary health care facilities to the hospital in a rural area of Korea. The subject for this study was sampled from a community health development project carried out by the Korea University in Yeoju Kun, Kyonggi Province. The data of referred patients from primary health care facilities were collected during the period from January 1989 to December 1989. The data was sorted out by a computer system using Database package. The results of this study were summarized as follows: 1. Characteristics of the referred patients were: males $32.0\%$. and females $68.0\%$. The more elderly of the patients visited to the hospital after having been referred there by CHPs or public physicians, $25.9\%$ has been to hospital on at least one previous occasion as against $74.1\%$ for whom it was there first visit. 2. The majority of patients who were referred to a hospital where: medicine $44.3\%$ and orthopedics$16.4\%$, major diseases were : diseases of digestive system $(21.3\%)$ ; symptoms and ill defined conditions $(17.3\%)$ ; diseases of the muscular skeletal system and connective tissue$(14.2\%)$. chronic illness was $82.0\%$ and acute illlness was $18.0\%$. 3. From Community health practitioners more patients referred than the public physicians. Categoris of diseases of the referred patients were different between community health practitioners and public physicians. Due to the. respective differences between the medical restrictions put on the nursing staffs at the community health practitioners and public physicians. From this study it was recommended to define the reason of differences between ~he two groups in futher study. Study as to 1) why one group should be referring more for hospital treatment than the other. And 2) why the two agencies should be referring different diseases.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.4
• /
• pp.262-269
• /
• 2010

Introduction: Accurate diagnosis and treatment planning are very important for orthognathic surgery. A small error in diagnosis can cause postoperative functional and esthetic problems. Pre-existing 2-dimensional (D) chephalogram analysis has a high likelihood of error due to its intrinsic and extrinsic problems. A cephalogram can also be inaccurate due to the limited anatomic points, superimposition of the image, and the considerable time and effort required. Recently, an improvement in technology and popularization of computed tomography (CT) provides patients with 3-D computer based cephalometric analysis, which complements traditional analysis in many ways. However, the results are affected by the experience and the subject of the investigator. Materials and Methods: The effects of the sources human error in 2-D cephalogram analysis and 3-D computerized tomography cephalometric analysis were compared using Simplant CMF program. From 2008 Jan to 2009 June, patients who had undergone CT, cephalo AP, lat were investigated. Results: 1. In the 3 D and 2 D images, 10 out of 93 variables (10.4%) and 11 out 44 variables (25%), respectively, showed a significant difference. 2. Landmarks that showed a significant difference in the 2 D image were the points frequently superimposed anatomically. 3. Go Po Orb landmarks, which showed a significant difference in the 3 D images, were found to be the artificial points for analysis in the 2 D image, and in the current definition, these points cannot be used for reproducibility in the 3 D image. Conclusion: Generally, 3-D CT images provide more precise identification of the traditional cephalometric landmark. Greater variability of certain landmarks in the mediolateral direction is probably related to the inadequate definition of the landmarks in the third dimension.

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.104-109
• /
• 2013

Clip-type pulsimeter equipped with Hall device and a minute permanent magnet as sensing the minute movement of a radial artery was developed. The clinical data of the 120 number of subject acquisited through the clip-type pulsimeter did treated with a typical statistical logistic regression analysis. The prediction algorithm for the replete pulse and vacuous pulse was studied. The reflective peak time and the notch peak time were major parameters to discern the replete pulse and vacuous pulse. The discrimination rate was 65%. It suggests that the logistic regression equations are possible to use the diagnosis index to predict and discern the oriental pulse wave.

• Health Policy and Management
• /
• v.19 no.4
• /
• pp.98-120
• /
• 2009

The purpose of this study is to elicit preference for drug listing decision criteria and to estimate the ICER threshold in South Korea using the discrete choice experiment (DCE) method. To collect the data, a DCE survey was administered to a subject sample either educated in the principle concepts of pharmacoeconomics or were decision makers within that field. Subjects chose between alternative drug profiles differing in four attributes: ICER, uncertainty, budget impact and severity of disease. The orthogonal and balanced designs were determined through computer algorithm to take the optimal set of drug profiles. The survey employed 15 hypothetical choice sets. A random effect probit model was used to analyze the relative importance of attributes and the probabilities of a recommendation response. Parameter estimates from the models indicated that three attributes (ICER, Impact, Severity of disease) influenced respondents' choice significantly(p${\pm}$0.001). In addition, each parameter displayed an expected sign. The Lower the ICER, the higher the probability of choosing that alternative. Respondents also preferred low levels of uncertainty and smaller impact on health service budget. They were also more likely to choose drugs for serious diseases rather than mild or moderate ones. Uncertainty however is not statistically significant. The ICER threshold, at which the probability of a recommendation was 0.5, was 29,000,000 KW/QALY in expert group and 46,500,000 KW/QALY in industry group. We also found that those in our sample were willing to accept high ICER to get medication for severe diseases. This study demonstrates that the cost-effectiveness, budget impact and severity of disease are the main reimbursement decision criteria in South Korea, and that DCE can be a useful tool in analyzing the decision making process where a variety of factors are considered and prioritized.

• Journal of Korean Institute of Industrial Engineers
• /
• v.35 no.2
• /
• pp.141-149
• /
• 2009

As the number of personal computers installed in vehicles increases, a touchpad often used in a labtop computer can be used for the control of an in-vehicle information system (IVIS). Using a touchpad to control the system allows the user to select among large amount of information with a single touch of dragging. For safety and convenience of a driver, the touchpad could be placed on a steering wheel. This research is designed to calculate the most efficient Control-Response Ratio (C/R ratio) for the menu interaction of a touchpad on a steering wheel. Since the menu pointer's rate of movement and proper C/R ratio is determined by the amount of selected information, the amount of displayed information and the movement of a menu pointer was chosen to be independent variables. The dependent variables are a user's preference and task completion time. Two factor full factorial within subject design was used 16 subjects. The investigation revealed that the amount of selected information increased with increasing C/R ratio. The movement of the pointer became slower as the amount of information increased. The best C/R ratio was calculated for each amount of information and preference regression of the user's preference was drawn accordingly. Through this research, the automobile interior designer can benefit from the guidelines suggested for the touchpad control.

• Korean Journal of Human Ecology
• /
• v.13 no.1
• /
• pp.75-84
• /
• 2004

Insufficient dietary intake of vitamin A is one of the major nutritional problems for elderly adults in some parts of Korea. The objective of this study was to determine the vitamin A nutritional status of elderly adults in Asan, Korea by assessing the dietary intake and serum retinol concentration. Five hundred twenty four subjects (218 male and 306 female) over 65 years were recruited from city of Asan. Each subject was interviewed to assess the intake of vitamin A using a 24hr recall method and data were analysed from computer-aided nutrient analysis program. Blood samples after 12hr fasting were collected for serum retinol concentration and reverse phased HPLC with UV detector used. The results showed that subjects did not consume the sufficient amount of energy (82-85% of Korean RDA for male and 77-79% RDA for female) and vitamin A (59% RDA for male and 50% RDA for female). Range for retinol intake was 0 to $4342\;{\mu}g$ a day while that of beta-carotene was 65 to $31595\;{\mu}g$. Serum retinol concentrations were within a normal range for both male ($80\;{\mu}g/dl$) and female ($67\;{\mu}g/dl$) subjects. Many subjects (n=342) consumed less than 50% RDA of vitamin A. However, if retinol intake was high (> $37\;{\mu}g$), even with less than 50% RDA of vitamin A intake, serum retinol concentration was high ($75\;{\mu}g/dl$). Subjects showed normal serum retinol status even with low vitamin A intake. The results suggested that optimal intake ratio of dietary retinol and carotenoid is important to maintain an appropriate serum retinol concentration.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.315-333
• /
• 2013

This study aims to investigate that today's Mixed Reality Technology did not appear suddenly but has its beginnings in 20th century Visual and Interactive Art. First, Photographic Art expressed three-D on the two-dimensional plane and mixed images of reality and virtuality. Photogram made people experience both two-dimensional images and three-dimensional effects concurrently, and Photomontage combined various photos and mixed reality and virtuality. Next, Cinema tried to combine virtuality and reality using objets and CG. Early Cinema composed films and real objets. As computer technology developed, Cinema composed objet CG on real images and then tried background CG compositing. Finally, Telepresence Art tried a new possibility of Mixed Reality breaking the boundary between reality and virtuality, subject and object. It oscillates between virtual space in reality and real space in virtuality, or represents Mixed Reality by remote control of long distance participants. In the future, for the development and direction of Mixed Reality, there will be more need of referring to Visual and Interactive Art.