• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.119-124
• /
• 2017

Machining optimization using typical computer-aided manufacturing (CAM) software mainly depends on tool paths, and it is impossible to predict the behavior of material or cutting force. In this paper, cutting force analysis simulation is performed on the Unibody Case of a mobile phone with the aim of optimizing cutting-force-based machining using the Third Wave Systems' AdventEdge Production Module. Machining time after optimization was shortened by 42% for roughing compared to pre-optimization, and actual machining time was reduced by 36.8%. For finishing, machining time was reduced by 92%, and actual machining time was reduced around 90%. A surface roughness analysis found that the post-optimization surface roughness was $1.16{\mu}m$ Ra, compared to a pre-optimization value of $1.75{\mu}m$ Ra.

• 한국기계가공학회지
• /
• 제19권7호
• /
• pp.22-34
• /
• 2020

Three-dimensional (3D) computer-aided design (CAD) models require different levels of detail (LODs) depending on their purpose. Therefore, it is beneficial to automatically simplify 3D CAD assembly models to meet the desired LOD. Feature-based 3D CAD assembly models typically have the lowest and highest feasible limits of LOD during simplification. In order to help users obtain a feasible simplification result, we propose a method to simplify feature-based 3D CAD assembly models by determining the lowest and highest limits of LOD. The proposed method is verified through experiments using a simplification prototype implemented as a plug-in type module on Siemens NX.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.23-32
• /
• 2005

This study attempts to address the development processing of yarn-dyeing jacquard design by using jacquard textile design professional CAD system to create high valued worth products. To carry out this purpose, two kinds of necktie samples were designed and each of them was different in three types of weaving method. The results are as follows; All over type is appropriate when the motive's size is small. And the work can be finished within short time and design can be illustrated by basic jacquard system. However, one point type can represent rather big and audacious motive but it needs lots of working hours and jacquard system. Though the motives are identical, showed many changes in cubicle representation according to weaving methods and the structure. To express simple and modest design, single fabric woven is suitable and in the need of colorful and technical design, expressing by double weft cloths and triple weft cloths rather than single fabric woven are better to give creativity and colorfulness. For the production of jacquard design, cad system using ability is important but the understanding and study of the whole process of weaving development should be made.

• 공학교육연구
• /
• 제16권1호
• /
• pp.54-63
• /
• 2013

This study aims to investigate relationships among self-directed learning readiness [SDLR], prerequisite mathematics test score and achievement level in college mathematics. For this purpose, the adjusted SDLRS (self-directed learning readiness scale) of Guglielmino's model, the score of mathematics diagnostic assesment and first semester college mathematics score among 424 freshmen students of engineering department of D university in 2011 were used and analyzed. Research results are as follows: Firstly, freshmen of engineering department had average level of SDLR, though they showed relative low level of self-direction, passion and time control ability. Secondly, considering SDLR with the mathematics diagnostic assesment score (3 groups: high, middle, low), there were no statistically significant differences. Thirdly, concerning SDLR according to the achievement level in college mathematics, a group which acquired good achievement showed higher level of SDLR compared with middle or lowachievement group. Differences among three groups were statistically significant. Lastly, there were affirmative relationships between SDLR, mathematics diagnostic assesment score and achievement in college mathematics. Furthermore, mathematics diagnostic assesment score and achievement level in college mathematics were found to be the most closely related. Based on the results, we suggest strategies to elevate SDLR of engineering department students and improve their achievement in college mathematics.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.19-25
• /
• 2008

Selective Catalytic Reduction is effective in the reduction of NOx emission. This research focused to evaluate the performance of a urea-SCR system and was conducted in two procedures. One is SCR reactor test using model gas in order to provide an optimal injection condition itself. In this step, some parametric study on emission temperature, space velocity, aspect ratio and the formation of urea spray were made by using flow visualization and Computation Fluid Dynamics techniques. The basic simulation results contributed in determining the layout for an actual engine test. The other is an engine performance and emission test. The urea injector was placed at the opposite direction of exhaust gases emitted into an exhaust duct and an optimal amount of a reducing agent is estimated accurately under different engine loads and speeds. Furthermore, the variation of NOx emission and applied amount of urea was investigated in terms of modes under the condition of with and without SCR, and other emissions such as PM, CO and NMHC were evaluated quantitatively as well. This research may provide fundamental data for the practical use of urea-SCR in future.

• 대한의용생체공학회:의공학회지
• /
• 제35권2호
• /
• pp.26-34
• /
• 2014

Little information is available about the characteristics in revolution gait of hemiplegic elderly, which is frequently represented in daily life. It is also hard to elucidate purely the characteristics due to hemiplegia because of no consideration of aging factors. The aim of study is to identify the alteration characteristics of lower extremity joint angles in both straight and revolution gaits together due to hemiplegia through comparing healthy with hemiplegic elderly. Following Institutional Review Board approval, twelve healthy and hemiplegic elderly were participated and the center of body mass (COM) and lower extremity joint angles were measured during straight and revolution gaits using a computer-aided video motion capture system. The results showed that the gait characteristics were generally altered in both straight and revolution gaits due to hemiplegia (p < 0.05). The gait characteristics were then different between the straight and revolution gaits each other. This study may be valuable by identifying for the first time the alterations of the lower extremity joint angles in both straight and revolution gaits due to pure hemiplegia through comparing healthy elderly with hemiplegic elderly.

• 한국CDE학회논문집
• /
• 제19권1호
• /
• pp.41-49
• /
• 2014

For the reuse of the existing 3D block model of a ship, we analyze the hull modeling process using AVEVA Marine which is a representative CAD (Computer-Aided Design) system for the shipbuilding. In the AVEVA Marine environment where the design engineer makes 3D model on the 2D view that is so-called 2.5D, it cannot be possible to copy to reuse the block model just simply copying the 3D feature model itself like in the general mechanical CAD system or Smart Marine 3D which are on the basis of the 3D model representation. In this paper, we analyze the scheme file where the 3D model is defined in AVEVA Marine so that we develop the program for the block copy and the translation using this scheme file. It is significant that this program can be immediately available as a real-world application on the AVEVA Marine environment.

• 한국정보시스템학회지:정보시스템연구
• /
• 제8권1호
• /
• pp.27-44
• /
• 1999

Case-Based Reasoning(CBR) offers a new approach for developing knowledge based systems. CBR has several research issues which can be divided into two categories : (1) static issues and (2) dynamic issues. The static issues are related to case representation scheme and case data model, that is, focus on casebase which is a repository of cases. The dynamic issues, on the other hand, are related to case retrieval procedure and problem solving process, i.e. case adaptation phase. This research is forcused on retrieval procedure Traditional query processing accepts precisely specified queries and only provides exact answers, thus requiring users to fully understand the problem domain and the casebase schema, but returning limited or even null information if the exact answer is not available. To remedy such a restriction, extending the classical notion of query answering to approximate query answering(AQA) has been explored. AQA can be achieved by neighborhood query answering or associative query answering. In this paper, neighborhood query answering technique is used for AQA. To reinforce the CBR process, a new retrieval procedure(cooperative CBR) using neighborhood query answering is proposed. An neighborhood query answering relaxes a query scope to enlarge the search range, or relaxes an answer scope to include additional information. Computer Aided Process Planning(CAPP) is selected as cooperative CBR application domain for test. CAPP is an essential key for achieving CIM. It is the bridge between CAD and CAM and translates the design information into manufacturing instructions. As a result of the test, it is approved that the problem solving ability of cooperative CBR is improved by relaxation technique.

• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.793-808
• /
• 2014

The goal of this study is to evaluate and design steel plates with optimal material distributions achieved through a specific material topology optimization by using a CCARAT (Computer Aided Research Analysis Tool) as an optimizer, topologically optimally updating node densities as design variables. In typical material topology optimization, optimal topology and layouts are described by distributing element densities (from almost 0 to 1), which are arithmetic means of node densities. The average element densities are employed as material properties of each element in finite element analysis. CCARAT may deal with material topology optimization to address the mean compliance problem of structural mechanical problems. This consists of three computational steps: finite element analysis, sensitivity analysis, and optimality criteria optimizer updating node densities. The present node density based design via CCARAT using node densities as design variables removes jagged optimal layouts and checkerboard patterns, which are disadvantages of classical material topology optimization using element densities as design variables. Numerical applications that topologically optimize reinforcement material distribution of steel plates of a cantilever type are studied to verify the numerical superiority of the present node density based design via CCARAT.

• 한국정보통신학회논문지
• /
• 제2권3호
• /
• pp.359-365
• /
• 1998

The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO & RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather, Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation, and partly modified 900MHz band cordless phone circuit.