• Journal of The Korean Association For Science Education
• /
• v.11 no.1
• /
• pp.73-81
• /
• 1991

The condensed results of the analytical study on 361 doctoral dissertations in science education recorded in Dissertation Abstracts International during the years of 1985-1989 are as follows: About eighty to hundred dissertations were produced annually, but a slight decline in number was noted currently. About 94.4% of dissertations were produced by the universities in the USA The research data of 361 dissertations were collected from 25 countries. Over 40% of total dissertations had been focused on high school(senior middle school) and college students as the source of research. Disciplines of science constituting the background of dissertations were biology(l9.l%), physics(l2.7%), chemistry(12.0%) and earth science(2.5%). Concerning the research branches, the number of dissertations belonging to complex research(composed of experimental and theoretical research) was 118(32.7%) and those belonging to experimental and theoretical research were 88(24.4%) and 74(20.5%) respectively. Also that belonging to computer-aided research was 45(12.5%). The general methods of data collection were examination & test(34.9%), questionaire(22.2%) and complexmethod(9.1%). The main areas of dissertations were academic achievement(31.8%), teaching assessment(20.2%) and pedagogy(l8.8%).

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.260-266
• /
• 1996

This study was carried out to investigate the bacterial microflora of commercial and traditional Kochujang. Computer aided idetification systems were used to identify the bacteria in Kochujang. Seven genera such as Bacillus, Corynebacterium, Enterococcus, pasteurella, Pseudomonas, Staphylococcus and Streptococcus in commercial process and 10 genera such as Bacillus, Corynebacterium, Enterococcus, Flavimonas, Flavobacterium, Gemella, Pasteurella, Pseudomonas, Staphylococcus and Streptococcus in traditional process were identified. Distribution of genus Bacillus was $56{\sim}70%$ during fermentation in the commercial process and $38{\sim}50%$ in the traditional process. B. lichenoformis strains identified in this study were classified into three types by their physiological characteristics.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.4
• /
• pp.71-83
• /
• 2008

The recent advances of the information technology have motivated lots of research efforts to develop new computer-aided teaching and learning methodologies on various computer science topics, such as data structures, operating system, computer networks, and computer architecture. However, there have been only few studies to educate the database subject although it is one of the most important topics in the computer science. Specifically, among the various issues in the database subject, a learner often suffers to understand the mechanism of the concurrency control and recovery of database transaction in the database because it highly interacts with other functions in the database. Obviously, an intelligent visualization tool can help a learner to understand the process of the concurrency control and the recovery of database transaction. The purpose of this study is to develop an efficient visualization tool which can help users understand the two phase locking protocol (2PLP)-based concurrency control. Specifically, this visualization tool is designed to encourage a users' participation and raise their interest by visualizing the process of transactions and allowing users to specify and manipulate their own transactions.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.51-61
• /
• 2017

This paper demonstrates a systematic approach for the design of broadband, high efficiency, high power, Class-AB RF amplifiers with high gain flatness. It is usually difficult to simultaneously achieve a high gain flatness and high efficiency in a broadband RF power amplifier, especially in a high power design. As a result, the use of a computer-aided simulation is most often the best way to achieve these goals; however, an appropriate initial value and a systematic approach are necessary for the simulation results to rapidly converge. These objectives can be accomplished with a minimum of trial and error through the following techniques. First, signal gain variations are reduced over a wide bandwidth using a proper pre-matching network. Then, the source and load impedances are satisfactorily obtained from small-signal and load-pull simulations, respectively. Finally, two high-order Chebyshev low-pass filters are employed to provide optimum input and output impedance matching networks over a bandwidth of 100 MHz-500 MHz. By using an EM simulation for the substrate, the simulation results were observed to be in close agreement with the measured results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2514-2518
• /
• 2003

The KAERI Spent Fuel Remote Technology Development (SFRTD) Department is developing the remote maintenance and repair equipment, which is used in a hot cell in an intense radiation field, as part of a project to develop the Advanced spent fuel Conditioning Process (ACP). Although several mechanical master-slave manipulators (MSMs) is mounted on the hot cell wall, their reach will be limited and cannot access areas for all the ACP equipment maintenance. A Bridge Transported ServoManipulator (BTSM) has been designed to overcome the limitation of access areas that is a drawback of MSMs for the ACP equipment maintenance. The BTSM system consists of four components: a transporter with telescoping tubeset, a slave manipulator, a master manipulator, and a remote control system. The BTSM system has been designed by Solid Edge that is a 3D computer-aided design (CAD) software, except for the remote control system. The master manipulator and the slave manipulator are kinematically similar in design, except for the handle and the tong, respectively. The manipulators have 6 degrees of freedom (DOF) plus the jaws motion. The transporter has traveling, traverse, and hoisting motion to position the slave manipulator.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.443-450
• /
• 2016

In this study, we are using a computer tomography image of the abdomen, as an experimental linear research for the image of the fatty liver patients texture features analysis and computer-aided diagnosis system of implementation using the ROC curve analysis, from the computer tomography image. We tried to provide an objective and reliable diagnostic information of fatty liver to the doctor. Experiments are usually a fatty liver, via the wavelet transform of the abdominal computed tomography images are configured with the experimental image section, shows the results of statistical analysis on six parameters indicating a feature value of the texture. As a result, the entropy, average luminance, strain rate is shown a relatively high recognition rate of 90% or more, the control also, flatness, uniformity showed relatively low recognition rate of about 70%. ROC curve analysis of six parameters are all shown to 0.900 (p = 0.0001) or more, showed meaningful results in the recognition of the disease. Also, to determine the cut-off value for the prediction of disease six parameters. These results are applicable from future abdominal computed tomography images as a preliminary diagnostic article of diseases automatic detection and eventual diagnosis.

• 한국정보교육학회:학술대회논문집
• /
• 2004.08a
• /
• pp.28-37
• /
• 2004

The purpose of this paper is Inflect ICT in each subject class of common school by effort about education Information that was regularized with enforcement of the seventh training courses and arrived in visual point that realize education information concretely. But, such realistic that specific discussion and research about actual ICT introduction direction or practical use way consisted enough up to now despite Is urgent example difficult. Decide target connected with Information Technology by classified grade-class and plan that teach learners systematically may have to flow fair discussion and trial run success or failure of education and point that is connected directly problem that establish date or the level and target that it is very as itself value how. Therefore, this research wished to premise computer-aided education target in primary school by analyze education target of each subject that come out in primary grade subject and abroad training courses.

• International Journal of Computer Science & Network Security
• /
• v.22 no.10
• /
• pp.340-346
• /
• 2022

Construction industry is considered as one of the oldest industries in the world since human came into being and the need of their own space is realized. All this led to make the world a space of many beautiful constructive ventures. As per the requirements of today's world, every industry is recognizing the need for use and adoption of modern as well as innovative technologies due to their benefits and timely production. Now construction industry has also started adopting the use of modern and innovative technologies during their projects but still the rate of adoption is so slow. From design to completion, construction projects take a lot to manage for which technology based solutions have continuously been proposed. These include Computer Aided Design (CAD), building information modeling (BIM) and cloud computing have been proved to be much successful until now. The construction projects are high budgeted, and direly require timely and successful completion with quality, resource and other constraints. So, the researchers observe the need of more clear and technology based communication between the construction projects and its constructors and other stakeholders is required before and during the construction to take timely precautions for expected issues. This study has analyzed the use of Augmented Reality (AR) technology adopting GammaAR, and ARki applications in construction industry. It has been found that both applications are light-weighted, upgradable, provide offline availability and collaborative environment as well as fulfil most of the requirements of the construction industry except the cost. These applications also support different screen size for better visualization and deep understanding. Both applications are analyzed, based on construction's application requirements, usability of AR and ratings of applications user collected from application's platform. The purpose of this research is to provide a detail insight of construction applications which are using AR to facilitate both the future developers and consumers.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.494-504
• /
• 2006

This research proposes a reliability-based topology optimization (RBTO) using the finite element method. RBTO is a topology optimization based on probabilistic (or reliability) constraints. Young's modulus, thickness, and loading are considered as the uncertain variables and RBTO is applied to static and eigenvalue problems. The RBTO problems are formulated and a sensitivity analysis is performed. In order to compute probability constraints, two methods-RIA and PMA-are used. Several examples show the effectiveness of the proposed method by comparing the classical safety factor method.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.1
• /
• pp.3-8
• /
• 2006

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module optimal design technique and horizontal split of die insert were investigated for determining appropriate dimensions of components of multi-former die set. Results obtained, using the modules, enable the design and manufacture of a die set for a multi-former to be more efficiently performed.