• 한국시뮬레이션학회논문지
• /
• 제22권3호
• /
• pp.71-79
• /
• 2013

PC급 성능의 서버를 네트워크로 연결하여 대규모 웹서비스에 사용하는 웹서버 클러스터 시스템이 널리 활용되고 있다. 본 논문은 단순 페이지 뷰, 지식 탐색, 동영상 뷰 및 동영상 업로드 등 4가지 형태의 웹 서비스를 제공하는 대규모 웹서버 클러스터 시스템을 대상으로 공동 사용 방식과 전용 사용 방식을 적용할 경우 각각 필요한 웹서버 규모를 예측해 본다. 이를 위해 일정한 수준의 자원 활용률을 유지하면서 응답시간을 짧게 유지하는 서버 배치 방안을 컴퓨터 시뮬레이션 실험을 통해 모색해 본다.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.24-32
• /
• 2008

Environmental test is divided into operation test and storage test. The temperature of storage test is induced temperature which is considered with all sort of the heat source. Induced temperature is the temperature to be adapted to each item and platform and can be induced by computer simulation, laboratory, and real field test. We considered the induced temperature to be associated with solar heat source. In this research. First, we compared the induced temperature which be occurred by one experiment for thin plate in solar test chamber with the other one which be occurred by computer simulation to be SolidWorks 2007 COSMOS FloWorks. After this verification, we showed induced temperature which can be occurred when the test item is stored. Especially, we bring out the induced temperature by applying the ambient temperatures which is presented by MIL-STD-810F and brought out in preceding research.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1982-1989
• /
• 2004

In photoelasticity, the directions of principal stresses are given by isoclinic fringe patterns. In this study, photoelastic theory is represented by Jones calculus and the photoelastic 8-step phase shifting method is described. A feasibility study using computer simulation is done to get isoclinics from photoelastic fringes of a circular disk under diametral compression. Fringe patterns of the disk are generated from the stress-optic law. The magnitudes of isoclinics obtained from the fringe patterns of computer simulation and experiment are compared with those of theory. The results are close between them. Then, the 8-step phase shifting method is applied to get distributions of isoclinics along the specified lines of a cuved beam plate under tensile load. Experimental results obtained from the phase shifting method were compared with those of finite element analysis (ANSYS). It is confirmed that measurement of isoclinic distributions is possible by use of photoelasitc phase shifting method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.883-886
• /
• 1998

In order to detect the user's gaze position on a monitor by computer vision, the accurate estimations of 3D positions and 3D motion of facial features are required. In this paper, we apply a EKF(Extended Kalman Filter) to estimate 3D motion estimates and assumes that its motion is "smooth" in the sense of being represented as constant velocity translational and rotational model. Rotational motion is defined about the orgin of an face-centered coordinate system, while translational motion is defined about that of a camera centered coordinate system. For the experiments, we use the 3D facial motion data generated by computer simulation. Experiment results show that the simulation data andthe estimation results of EKF are similar.e similar.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.83-93
• /
• 1990

The characteristics of servo systems are desired to be independent for any unpredicted operational condition. The relation between input current and output flowrate of the servovalve is dependent on the load pressure and the idea of compensation using the load pressure feedback is fundamental theory in this paper. With this idea, this paper researches the performance improvement of hydraulic position control system. Static characteristics of compensated system is analyzed by means of analog computer simulation, digital computer simulation and experiment for nonlinear model and linearized model, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.243-246
• /
• 2001

Thyristor devices have 3-dimensional complicated structure and were sensitive to temperature characteristics. Therefore, it was difficult to optimize thyristor devices design. We have to consider many design parameter to characterize, and trade-off relations. The important parameters to design thyristor devices are cathode structure, effective line width, cathode-emitter shunt structure, gate structure, doping profile and carrier lifetime. So, we must consider that these design parameters were not acted separately. However, there are many difficulties to determine optimized design parameters by experiment. So, We used specific design software to design thyristor devices, and estimated the thyristor devices characteristics.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1001-1010
• /
• 2013

A sensible media simulation system for automobiles is introduced to open up new possibilities for an in-car entertainment system. In this paper, the system architecture is presented, which includes a virtuality-to-reality adaptation scheme. Standard data schemes for context and control information from the International Standard MPEG-V (ISO/IEC 23005) are introduced to explain the details of data formats, which are interchangeable in the system. A sensible media simulator and the implementation of a sensory device are presented to prove the effectiveness of the proposed system. Finally, a correlation between learning styles and sensory effects (that is, wind and vibration effects) is statistically analyzed using the proposed system. The experiment results show that the level of satisfaction with the sensory effects is unaffected overall by the learning styles of the test subjects. Stimulations by vibration effects, however, generate more satisfaction in people with a high tactile perception level or a low visual perception level.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.105-113
• /
• 1995

The objective of the study is to investigate the influence of aesthetic attributes on user interface design. Theories of aesthetics are first studied from which aesthetic attributes are defined as information sources. Representation of a product is viewed as a combination of aesthetic attributes, based on a hypothesis that each attribute has a certain influence on the performance in terms of user interface. An experiment was conducted to support the hypothesis. Various combinations of aesthetic attributes of a microwave oven were generated from the orthogonal array of a conjoint analysis. Subjects perfomed on a computer two types of tasks, each of which simulated a combination of attributes. Reaction time was evaluated as a performance measure for the conjoint analysis to find out how much influence each attribute has on the performance. A computer program, UISA(User interface Simulation system of Aesthetic attributes0, was developed and used for simulation. Findings on the influences of aesthetic attributes were summarized.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1150-1157
• /
• 1994

This paper presents dynamic analysis of a hydraulic excavator based on experimental data. A three dimensional multibody model of a hydraulic excavator is modeled for the computer simulation. The hydraulic pressures acting on the cylinders are measured from experiments, and the forces exerting on the cylinders are calculated from the measured pressures. Using these forces, the dynamic analysis of the excavator is carried out to regenerate the motion in the computer simulation. A proper operation scheme is assumed to match the computational result and the experiment. The DADS program is used for the dynamic analysis.

• Transactions on Electrical and Electronic Materials
• /
• 제5권6호
• /
• pp.211-214
• /
• 2004

We developed a new systematic calibration procedure which was applied to the calibration of the diffusivity, segregation and TED model of the indium impurity. The TED of the indium impurity has been studied using 4 different groups of experimental conditions. Although the indium is susceptible to the TED, the RTA is effective to suppress the TED effect and maintain a steep retrograde profile. Like the boron, the indium shows significant oxidationenhanced diffusion in silicon and has segregation coefficients at the $Si/SiO_2$ interface much less than 1. In contrast, however, the segregation coefficient of indium decreases as the temperature increases. The accuracy of the proposed technique is validated by SIMS data and $0.13 {\mu}m$ device characteristics such as $V_{th}$ and $Id_{sat}$ with errors less than $5 \%$ between simulation and experiment.