• 한국시뮬레이션학회논문지
• /
• 제6권1호
• /
• pp.25-40
• /
• 1997

This study deals with an autonomous generation of simulation codes for the design of processes of c CIM system based on the concept of model transformation. We assume we have a functional model of an organization which is developed using the well-known IDEF0 methodology. Then, a modeling methodology, called PROWD(PRocess flOW Description), is suggested to develop the flow processes of the organization. To Derive simulation specifications for the transformed PROWD model, we define a module of a "unit system" for each activity of PROWD model. Then specifications for system entities and resources are derived from input/control/mechanism/output and entity flows of PROWD model. Entitiy queues are defined from the sates and events of unit systems. Finally, SIMAN model frame is generated from those specifications through a suggested algorithm. The implementability and validity of the proposed approach is tested by developing a prototype of a computer-assisted design system on the operation processes of FMS installed at SNU-ASRI (Seoul National University-Automation and Systems Research Institute).nstitute).

• 한국주조공학회지
• /
• 제9권1호
• /
• pp.39-48
• /
• 1989

A basic three dimensional thermal model has been developed to simulate the solidification sequence for gravity die casting process. The finite difference method was used to analyze the solidification process during all the casting cycles. The prediction of die temperature in the quasi-steady state was analyzed by the boundary element method. The influence of die cooling on the heat flow in the cast/mold system was also investigated. Predictions of the computer simulation on temperature profiles and location of shrinkage defects were in good agreement with those observed in experimental die castings. Models of computer simulation which is developed by this work can be useful for the design and process control of die casting.

• Journal of Biosystems Engineering
• /
• 제26권2호
• /
• pp.155-162
• /
• 2001

The greenhouse heating system with heat pump was built for development of simulation model and validation. The computer simulation model for the system to predict temperature of air and soil and moisture content of soil in the greenhouse were developed, and its validity was justified by actual data. From the analysis of experimentally measured data and the simulation output, following results were obtained. 1. The expected values of inside air temperature for the heating system with heat pump were very much close to the experimental values. 2. In the heating system with heat pump, the expected values of day time surface temperature of soil by computer simulation were very much similar to the measured values, but those of night time were higher than the measured value by at most 2.0$\^{C}$. 3. The simulation model predicted temperature of greenhouse film as of 1$\^{C}$ below than the mean value of ambient air and greenhouse air temperature. 4. Heat loss value of daytime was found to be larger than that of nigh as much as 1.3 to 2.3 times for the heating system with heat pump. 5. In the heating system with heat pump, when the lowest ambient temperature was -8$\^{C}$∼-7$\^{C}$ the air temperature of greenhouse was 5$\^{C}$∼6$\^{C}$, thus the heat pump heating system contributed in greenhouse heating by 13$\^{C}$.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.31-44
• /
• 2019

This study simulated a control rod assembly (CRA), which is a part of reactor shutdown systems, in immersed and fluid flow conditions. The CRA was inserted into the reactor core within a predetermined time limit under normal and abnormal operating conditions, and the CRA (which consists of complex geometric shapes) drop behavior is numerically modeled for simulation. A full-scale prototype CRA drop test is established under room temperature and water-fluid conditions for verification and validation. This paper describes the details of the numerical modeling and analysis results of the several conditions. Results from the developed numerical simulation code are compared with the test results to verify the numerical model and developed computer code. The developed code is in very good agreement with the test results and this numerical analysis model and method may replace the experimental and CFD method to predict the drop behavior of CRA.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.31-40
• /
• 1999

The objective of this study were to develop a cooling simulation model for fixed-bed of rough rice and to analyze the factors affecting cooling time of rough rice. A computer simulation model based on equilibrium conditions between grain and air was developed to predict temperature and moisture content changes during cooling of rough rice. the result of t-test showed that there were no significant differences between predicted and measured temperature changes on significance model agreed well with measured values. This cooling simulation model was applied to analyze the effect of some factors, such as air flow rate, cooling air temperature and humidity, initial grain temperature and moisture content, and bed depth, on cooling time of rough rice. Cooling rate increased with increase of air flow rate and bed depth whereas it decreased with increase of cooling air temperature and humidity and initial grain temperature. Among these factors, the most important factor was air flow rate. Specific air flow rate of 0.35㎥/min㎥ was required for cooling rough rice in 24 hours.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.105-114
• /
• 2020

In this study, based on the System Dynamics (SD) methodology, the interrelationship between the factors inherent in the operation of the New Technology Certification System (NTCS) in Korea was identified by a causal map containing a feedback loop mechanism in connection with 'new technology development investment', 'commercialization of new technology', and 'sales by new technology'. This conceptualized causal map was applied to the simulation of the operations of the New Excellent Technology and Environmental Technology Verification System (NET&ETV) run by the Ministry of Environment among various NTCSs in Korea. A SD computer simulation model was developed to analyze and predict the operational performance of the NET&ETV in terms of key performance indices such as 'sales by new technology'. Using this model, we predicted the future operational status the NET&ETV and found a policy leverage that greatly influences the operation of the NET&ETV. Also the sensitivity of the key indicators to changes in the external variables in the model was analyzed to find policy leverage.

• 컴퓨터교육학회논문지
• /
• 제19권1호
• /
• pp.63-76
• /
• 2016

사이버불링의 피해가 점차 증가하고 있다. 이에 따라 사이버불링에 대한 법률 및 교육적 대응과 더불어, 기술(code)에 의한 대응도 요구되고 있다. 본 연구에서는 이러한 기술적인 해결 방법 중 하나로 가상 체험형 시뮬레이션의 장점을 이용하고자 하였다. 본 연구에서 개발한 적용 모형은 인지${\rightarrow}$판단${\rightarrow}$결정${\rightarrow}$행동의 각 단계 및 수준을 거치며, 사이버불링에 대한 예방 및 학습을 하게 된다. 각 단계의 세부 모형은 프리브리핑${\rightarrow}$시나리오제시${\rightarrow}$반응요구${\rightarrow}$반응참여${\rightarrow}$결과 및 피드백${\rightarrow}$성장${\rightarrow}$디브리핑으로 구성된다. 이와 같이 사이버불링 예방 및 관련 교육을 하고자 가상체험형 시뮬레이션 적용 모형을 개발하고 이를 바탕으로 실제 구현하였다. 본 연구에서 개발한 모형과 시뮬레이션이 사이버불링의 피해를 줄이는데 도움이 되기를 기대한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.251-263
• /
• 2008

In this paper, we report an analytical modeling and 2-D Synopsys Sentaurus TCAD simulation of ion implanted silicon carbide MESFETs. The model has been developed to obtain the threshold voltage, drain-source current, intrinsic parameters such as, gate capacitance, drain-source resistance and transconductance considering different fabrication parameters such as ion dose, ion energy, ion range and annealing effect parameters. The model is useful in determining the ion implantation fabrication parameters from the optimization of the active implanted channel thickness for different ion doses resulting in the desired pinch off voltage needed for high drain current and high breakdown voltage. The drain current of approximately 10 A obtained from the analytical model agrees well with that of the Synopsys Sentaurus TCAD simulation and the breakdown voltage approximately 85 V obtained from the TCAD simulation agrees well with published experimental results. The gate-to-source capacitance and gate-to-drain capacitance, drain-source resistance and trans-conductance were studied to understand the device frequency response. Cut off and maximum frequencies of approximately 10 GHz and 29 GHz respectively were obtained from Sentaurus TCAD and verified by the Smith's chart.

• 디지털산업정보학회논문지
• /
• 제5권2호
• /
• pp.29-37
• /
• 2009

Recently, the structure of simulation environment is important issue in all fields. In case of the training for operating the machines which are costly such as airplanes or spaceships, simulators could be helpful for decreasing the costs and training effects by simulating real situation. When we get the driving license, too many peoples are waiting for their turns because of limited cars and testing spaces in Korea. To solve this problem, we've designed and developed the basic design for the simulators. We suggested the Computer 3D Simulation Model for practice of a drives's license. The concept of this simulator was from a 3D Racing-game which suit for driving exercise. We provide users with handle-controlled simulation setting in order that users feel reality as if they drive really through this simulator. We also use 'force-feedback' system which give handle vibration in case users collide against obstacles or exceed the line since users can absorb the simulation program and feel the sense for the real. This paper is the study about modeling the driving exercise model made use of 'computer 3D simulation', and producing and utilizing the simulator through this modeling.

• 산업공학
• /
• 제3권2호
• /
• pp.39-51
• /
• 1990

One of the most important and powerful tools available for design and/or study of the operation of complex systems and processes is simulation. Since automated material handling systems like AS/RS are often quite complex, a network-based simulation model is developed to analyze an automobile part supplier's automated storage and retrieval system(AS/RS). The network simulation model is implemented in the SLAM Ⅱ on a VAX 8800 computer. Performance of the AS/RS was tested for 3 dispatching rules, 3 work load levels, 2 storage policies, 3 levels of stacker crane break-down, and 2 conveyor system layouts. Results indicate that the AS/RS performance is primarily affected by the dispatching rule and work load level.