• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.381-386
• /
• 2003

Gradually engineering designers are determined based on computer simulations. Modeling of the computer simulation however is too expensive and time consuming in a complicate system. Thus, designers often use approximation models called metamodels, which represent approximately the relations between design and response variables. There arc general metamodels such as response surface model and kriging metamodel. Response surface model is easy to obtain and provides explicit function. but it is not suitable for highly nonlinear and large scaled problems. For complicate case, we may use kriging model that employs an interpolation scheme developed in the fields of spatial statistics and geostatistics. This class of into interpolating model has flexibility to model response data with multiple local extreme. In this study. metamodeling techniques are adopted to carry out the shape optimization of a funnel of Cathode Ray Tube. which finds the shape minimizing the local maximum principal stress Optimum designs using two metamodels are compared and proper metamodel is recommended based on this research.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.2
• /
• pp.70-79
• /
• 1999

In mobile database system, transactions processing schemes address in ones using a static coordinator and coordinator migration. This apply coordinator migration mechanism which perform the transaction in new database server when posed to be the transaction service handoff. That apply static coordinator mechanism which perform the transaction in database server to begin the transaction when posed to be the transaction service handoff. In this paper, a scheme-independent simulation model has been developed in order to support comparative performance studies of mobile transaction processing schemes. And this paper describes the model in detail and presents simulation results which were obtained for what it believe to be the performance evaluation of the mobile transaction processing schemes. Finally, the mobile transaction processing schemes will improve system performance by minimizing the transmission of message for processing the transactions in mobile database system.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2298-2306
• /
• 2017

A PMS (Power Management System) controls vessel's power systems to improve the system efficiency and to protect a blackout condition. The PMS should be developed with considering the type and the capacity of the vessel's power system. It is necessary to test the PMS functions developed for vessel's safe operations under various sailing situations. Therefore, the function tests in cooperation with practical power systems are required in the PMS development. In this paper, a hardware-in-the-loop (HIL) simulator is developed for the purposes of the PMS function tests. The HIL simulator can be more cost-effective, more time-saved, easier to reproduce, and safer beyond the normal operating range than conventional off-line simulators, especially at early stages in development processes or during fault tests. Vessel's power system model is developed by using a MATLAB/SIMULINK software and by communicating between an OPAL-RT's OP5600 simulator. The PMS uses a Modbus communication protocol implemented using LabVIEW software. Representative tests of the PMS functions are performed to verify the validity of the proposed HIL-based test platform.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.111-116
• /
• 1999

Over the last few years, there has been a growing interest in quantitative representation of heat transfer and fluid flow phenomena in weld pools in order to relate the processing conditions to the quality of the weldment produced and to use this information for the optimization and robotization of the welding process. Normally, a theoretical model offers a powerful alternative to estimate the important input parameters and to calculate the effects of varying any of parameters. To solve this problem, a transient 2D(two-dimensional) heat conduction and a transient 2D axisymmetric heat and fluid model were developed for determining weld bead geometry and temperature distribution for the GMA(Gas Metal Arc) welding process. The equation was solved using a general thermofluid-mechanics computer program, PHOENICS code, which is based on the SIMPLE algorithm. The simulation results showed that the calculated bead geometry from two developed models reasonably agree with the experiment result.

• Proceedings of the Korean System Dynamics Society
• /
• 2003.08a
• /
• pp.1-24
• /
• 2003

The purpose of this paper was developing a development density control model for urban growth management, using system dynamics modeling. The density control model was developed to see how urban growth, transition, and decay occur depending on the interaction among population, houses, industry structure, land and urban infrastructure such as road, water supply, and sewage treatment facilities. Suggesting adequate level of development density control using the model was another purpose of this paper. The model was applied to An'yang city to estimate the maximum number of population, industry structures, houses, and cars that can be adequately sustained with the current An'yang city's infrastructur capacity. The computer simulation results shows that the city is overpopulated by some 90,000 people. To reduce the population to the adequate level that the current urban infrastructure can sustain, the current city regulation on floor area ratio are needed to be strengthened at least 20 to 35%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.39-47
• /
• 1997

The focus of this research is to set up and describe the mathematical derivation of an automobile power-assisted rack and pinion steering system dynamics. The mathematical model of the power steering system dynamics with a 5 DOF linear vehicle model will be used in the computer simulation and evaluated comparing with the experimental results. This model is flexible to accommodate different vehicles through simple parameter changes. The developed mathematical model will attempt to provide enhanced driver realism to a Systems Technology, Inc. driving SIMulator(STISIM).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.572-581
• /
• 1991

For the development of a model to predict absorbed salt quantity in radish during salting, absorbed salt quantity and water content change in radish by the hour were measured at 5%, 10%, 15% brine concentration and $10^{\circ}C,\;20^{\circ}C,\;30^{\circ}C$ respectively. Absorbed salt quantity in radish by the time showed logarithmic function, absorbed salt quantity by brine concentration and temperature showed linear relation. A model to predict absorbed salt quantity in radish at each time, brine concentration and temperature was calculated by the regression program of SPSS. Apparent diffusivity of salt in radish was calculated from appropriated diffusion equation solution of Fick's second law using computer simulation. Salt diffusivity in radish increased as brine concentration increased and the effect of temperature could by expressed by Arrhenius equation. A model equation which could predict salt diffusivity was developed by regression analysis. To specify relation between salt quantity which absorbed into radish and water content which removed out of it, Flux ratio(${\Delta}W/{\Delta}S$) was calcuated. The values showed that the removed water content was greater than the absorbed salt quantity.

• ETRI Journal
• /
• v.6 no.3
• /
• pp.9-16
• /
• 1984

This paper describes $\mu$-law PCM/ADPCM Code Conversion System. The system algorithm is computer-simulated, and with the result of simulation the system is designed by using the Am 2900 family's Bit-Slice Microprocessors which have a high-speed processing power. The ADPCM algorithm is based on Jayant's model and the converting algorithm between $\mu$-law PCM and linear PCM is developed according to the CCITT Recommendation G. 711.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.4
• /
• pp.32-38
• /
• 2003

An analytical model of the interference phenomena in the centerless grinding process is developed to investigate their effects on the roundness profile of a centerless ground workpiece. In this work, the regulating wheel and work-rest blade interferences are modeled as a single point contact. The grinding wheel interference is modeled as multiple points contact because material removal is determined by the duration of contact. The computer simulation results show good agreement with the experimental data. From this work, the existence and effects of the interference phenomena in the centerless grinding process are found.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.220-220
• /
• 2015

Water, energy, and food security already became a risk that threatens people around the world. Increasing of resources demand, rapid urbanization, decreasing of natural resources and climate change are four major problems inducing resources' scarcity. Indeed, water, energy, and food are interconnected each other thus cannot be analyzed separately. That is, for simple example, energy needs water as source for hydropower plant, water needs energy for distribution, and food needs water and energy for production, which is defined as W-E-F nexus. Due to their complicated linkage, it needs a computer model to simulate and analyze the nexus. Development of a computer simulation model using system dynamics approach makes this linkage possible to be visualized and quantified. System dynamics can be defined as an approach to learn the feedback connections of all elements in a complex system, which mean, every element's interaction is simulated simultaneously. Present W-E-F nexus models do not calculate and simulate the element's interaction simultaneously. Existing models only calculate the amount of water and energy resources that needed to provide food, water, or energy without any interaction from the product to resources. The new proposed model tries to cope these lacks by adding the interactions, climate change effect, and government policy to optimize the best options to maintain the resources sustainability. On this first phase of development, the model is developed only to learn and analyze the interaction between elements based on scenario of fulfilling the increasing of resources demand, due to population growth. The model is developed using the Vensim, well-known system dynamics model software. The results are amount of total water, energy, and food demand and production for a certain time period and it is evaluated to determine the sustainability of resources.