• 제목/요약/키워드: Computer control

검색결과 11,838건 처리시간 0.041초

디젤기관(機關) 플라이휠의 고무댐퍼 개발(開發) (Development of Rubber Damper of Flywheel for Diesel Engine)

  • 명병수;김성래
    • 농업과학연구
    • /
    • 제20권1호
    • /
    • pp.68-87
    • /
    • 1993
  • 본(本) 실험(實驗)은 개발(開發)한 시스템과 분석(分析) 프로그램을 이용(利用)하여 플라이휠의 형태별(型態別)로 진동량변화(振動量變化)를 분석(分析)하였다. 플라이휠의 형태(型態)는 원래(元來)의 것과 중량(重量)을 8kgf감소(減少)시킨것, 그리고 중량(重量)을 감소(減少)시키고 립부(部)의 외부(外部)와 중간(中間)에 고무댐퍼를 부착(附着)시킨 것으로 각각(各各)의 진동량변화(振動量變化), PAV율(率), 최대진동량(最大振動量), FFT 등(等)을 분석(分析)하여 비교(比較)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 최대진동량(最大振動量)은 플라이훨 중간(中間)에 고무댐퍼를 부간(附看)한 것이 원래(元來)의 플라이휠에 비(比)하여 X축(軸) 방향(方向)은 48.3%, Y축(軸) 방향(方向)은 35.5% 그리고 Z축(軸) 방향(方向)으로는 34.6% 감소(減少)된 것으로 나타났다. 2. 절대진동량(絶對振動量)의 평균(平均)은 모든 공시(供試)플라이휠에서 부하(負荷)의 증가(增加)에 따라 감소(減少)하는 경향(傾向)이었으며 플라이휠의 림 중간(中間)에 고무댐퍼를 부착(附着)하는 것이 원래(元來)의 플라이휠보다 X축(軸) 방향(方向)은 46.7%, Y축(軸) 방향(方向)은 11.5% 그리고 Z축(軸) 방향(方向)에서는 7.1%가 감소(減少)되어 X축(軸) 방향(方向)의 진동감소(振動減少)는 고무댐퍼의 효과(效果)가 매우 높은 것으로 나타났다. 3. 히스테리시스 손실(損失)은 고무댐퍼를 림 중간(中間)에 부착(附着)한 플라이휠의 X축(軸) 방향(方向)에서 크게 감소(減少)하는 경향(傾向)으로 나타났다. 4. 피크진동량(振動量)의 평균(平均)보다 큰 X, Y축(軸) 방향(方向)의 진동(振動)은 고무댐퍼를 림 중간(中間)에 부착(附着)한 플라이휠에서 감쇠효과(減衰效果)가 크게 나타났다. 5. Power spectrum 분석결과(分析結果)는 실수부(實數部), 허수부(虛數部) 모두에서 가우슨분포곡선(分布曲線)과 일치(一致)하지 않는 bi-mode형태(形態)인 것으로 나타났다. 진동(振動)의 주파수(周波數)는 원래(元來)의 플라이휠은 43.2Hz이고 그외의 경우에서는 49Hz로 약간(若干) 증가(增加)하였다.

  • PDF

본태성 고혈압 환자의 자기실현 및 욕구구조에 관한 연구 (Manifest Weeds and Self-Actualization of Patients with Essential Hypertension)

  • 강익화
    • 대한간호학회지
    • /
    • 제8권1호
    • /
    • pp.163-180
    • /
    • 1978
  • Much of a person's energy is spent in the effort of becoming a productive member of to-day's complex society. This activity may cause tension, and chronic unrelieved tension is an influential factor in blood pressure elevation. The problem of this study was to identify manifest needs and self-actualization of patients with essential hypertension, and to analyse and compare their manifest needs and selt-actualization with the selected general characteristics of We, sex, religion, occupation and level of education with a control group of patients with normal blood pressure readings. The purpose was to contribute to the planning of nursing interventions toward reducing the impact of complex psycho-somatic factors on the anxiety of patients with essential hypertension. The instruments used included selected items from the Edwards (1959) Personal Preference Schedule (EPPS) as adapted by Hwang (1965) and from the Personal Orientation Inventory (POI) (Shostrom 1964, 1974) adapted by Kim and Lee (1977) to measure manifest needs and self-actualization. The convenience sample was chosen from 149 persons who presented themselves for general physical examinations at Ewha University Medical Centre and 41 patients diagnosed with essential hypertension at three general hospitals in Seoul during June 1 and August 31, 1977. Forty-nine persons from the Ewha group with blood-pressure readings exceeding 150/90 were added to the experimental group. Data were analysed by the S.P.S.S. computer programme using t-test and tests for statistical significance. Statistically significant findings were as follows: A. Blood Pressure and Manifest Needs. 1. with the exception of Autonomy, patients with hypertension had significantly high scores on all variables Abasement, Achievement, Affiliation, Aggression, Dominance, Emotionality, Exhibitionism and Sex. 2. When mean scores of normal persons were compared by age groups, normal persons had higher scores in the following order on Abasement (50's, 40's, 20's, 30's), Achievement (50's, 30's, 40's, 20's), Affiliation (50's, 40's, 30's, 20's), Dominance (50's, 40's, 40's, 20's) and Exhibitionism (30's, 50's, 40's, 20's). In each case, there was a significant difference between the first and last age group scores. 3. When the mean scores of normal persons were compared by sex, normal men had higher scores than women on Achievement, Affiliation, Aggression, Dominance, Exhibitionism and Sex. Male patients had higher scores than female patients on Achievement, Dominance, Exhibitionism and Sex, but female patients scored higher in Emotionality. 4. Normal persons had higher scores related to religion in the following order on Achievement (Buddhism, no religion, Christianity). Hyper tensive patients had higher scores on. Exhibitionism (no religion, Christianity, Buddhism). 5. Normal persons had higher scores related to occupation in the following order on Achievement and Exhibitionism (unemployed, office workers, teachless, businessmen), Emotionality (office workers, unemployed, businessmen, teacher) and Sex (office workers, unemployed, teachers, businessmen). Hypertensive patients had higher scores on Achievement and Aggression (teachers, businessmen, office worker, unemployed), Dominance and Exhibitionism (businessmen, teacher, of ace workers, unemployed) and Sex (teachers, office worker, businessmen, unemployed). 6. Normal persons had higher scores related to level of edification in the following order on Abasement, Emotionality and Autonomy (secondary school graduation, university). Hypertensive patients had higher scores on Abasement (no education, primary, university, secondary), Achievement (no education, secondary, university, primary) , Dominance (university, no education, secondary, primary), Exhibitionism (university, secondary, no education, primary), and Sex (university, secondary, primary, no education). B. Blood Pressure and Self_Actualization 1, Patients with hypertension had significantly lower scores on all variables. 2. Normal persons had higher scores related to age groups in the following order on Existentiality (20's, 30's, 40's, 50's). Hypertensive patients showed no significantly different scores. 3. Normal women had higher scores than men on Time Competence. Normal men had higher scores on Feeling Reactivity. Male patients had higher scores than women on Self-Actualizing Value and Self-Regard. 4. Normal persons ha 1 higher scores related to religion on spontaneity (Buddhism, no religion, Christianity). Hypertensive patients had higher scores on Time Competence and Nature of Man (Buddhism, Christianity, no religion). 5. Normal persons had higher scores related to occupation in the following order on Existentiality (teachers, office workers, businessmen, unemployed) and Self-Regard (unemployed, office workers, teachers, businessmen). Hypertensive patients showed no significantly different scores. 6. Normal persons had higher scores related to level of education in the following order on Existentiality and Self-Acceptance (university, secondary). Hypertensive patients had higher scores on inner-Director (university, secondary, no education, primary) and Existentiality (university, secondary, primary, no education). Recommendations for nursing interventions with hypertensive patients with emotional problems or low self-actualization were made. 1. The nurse should encourage the patient through her interactions with other members of the medical team to accept counselling and health education. 2. Through her therapeutic interpersonal relationships with the patient, the nurse should help him discover the causes of his emotional tension. 3. Through her health teaching with the family, the nurse should encourage them to participate with the medical team in the patient's therapeutic plan and in providing him with the minimum possible emotional support. 4. Through frequent counselling with the obsessive-thinking and inflexible patient, the nurse should reevaluate the patient's behaviour and her interventions. 5. Seriously ill patients should be given needed reeducation by members of the professional medical team.

  • PDF

수목의 장기 기후변화 연구시설: CO2 폭로용 상부 개방형 온실 (Long-term Climate Change Research Facility for Trees: CO2-Enriched Open Top Chamber System)

  • 이재천;김두현;김길남;김판기;한심희
    • 한국농림기상학회지
    • /
    • 제14권1호
    • /
    • pp.19-27
    • /
    • 2012
  • 본 연구는 외국에서 이용해 왔던 기존의 상부 개방형 온실의 단점을 보완하여, 장기적인 연구가 요구되는 수목을 대상으로 설치한 상부 개방형 온실의 운영결과를 제공하고자 하는 것이다. 이 자료에는 이산화탄소의 농도 조절 능력 및 안정성을 비롯하여, 대기와 OTC 내부 간의 미세환경 차이에 대한 정보를 포함하고 있다. OTC 시설은 대조구인 OTC 외부 시험구, 대기와 동일 $CO_2$ 농도의 OTC 시험구, 대기 $CO_2$ 농도의 1.4배 증가시킨 OTC 시험구, 대기 $CO_2$ 농도의 1.8배 증가시킨 OTC 시험구로 구성되어 있다. 이시설은 온실 6기, $CO_2$ 폭로장치 6기, $CO_2$ 제어장치 6기, 액화탄산가스 탱크 1기, 제어감시실 1실로 구성되어 있다. 온실 6기는 직경 10m, 높이 7m의 10각형 구조물로 제작되었으며, 상부 개구율은 75% 이상을 유지하고 있다. $CO_2$ 폭로를 위해 16개 원통형 토출배관을 도입하였다. OTC의 평균 가동률은 2010년 6월에 94.2%로 가장 낮았으나, 7월 이후부터는 98% 이상의 가동률을 나타냈고, 2011년에는 100% 가동률을 보였다. 2010년과 2011년 모두 $CO_2$ 농도 조절 결과는 목표 값에 도달하였으며, 2011년이 보다 안정된 값을 나타냈다. 2011년 무처리 OTC의 $CO_2$ 농도는 목표 값의 106%였으며, 1.4배 OTC는 목표 값의 100%, 1.8배 OTC는 목표 값의 94%였다. 대기와 OTC 내부의 온도는 오전 10시부터 오후 2시 사이에 차이가 가장 컸는데, 편차는 $1.2{\sim}2.0^{\circ}C$를 기록했으나, OTC간 온도 차이는 크지 않았다. 대기와 OTC 내부간 상대 습도의 차이는 0.1~1% 사이로 매우 적었다. OTC를 운영하는데 사용된 $CO_2$ 가스 소비량은 2010년과 2011년 6월에 가장 많은 11.33톤과 17.04톤을 기록했다.

가상현실시스템(CAVE)을 활용한 문화 Content의 복원 과정을 통한 CAVE활용 방안에 대한 연구 (Research about CAVE Practical Use Way Through Culture Content's Restoration Process that Utilize CAVE)

  • 김태열;유석호;허영주
    • 한국게임학회 논문지
    • /
    • 제4권3호
    • /
    • pp.11-20
    • /
    • 2004
  • 80, 90년대의 영화에서만 보아오던 가상현실이 과학 및 컴퓨터 기술의 비약적인 발전을 바탕으로 우리에게 가까이 다가오고 있다. 다양한 가상현실 시스템 (VRML, HMD, FishTank, Wall Type, CAVE Type)의 개발과 함께 그 시스템의 발전으로 더욱 현실감 있는 가상현실 구현이 가능해지고 있다. 몰입감이 높은 가상 현실은 이로써 사람들이 일상적으로 경험하기 어려운 환경을 직접 체험하지 않고서도 그 환경에 들어와 있는 것처럼 보여주고 조작할 수 있게 해주는 것이다. 가상현실의 응용분야로는 교육, 고급 프로그래밍, 원격조작, 원격위성 표면탐사, 탐사자료 분석, 과학적 가시화(scientific visualization)등을 들 수 있다. 구체적인 예로서, 탱크 및 항공기의 조종법 훈련, 가구의 배치 설계, 수술 실습, 게임 등 다양하다. 이런 가상현실 시스템에서는 인간 참여자의 실제조작과 가상 작업공간이 하드웨어로 상호 연결된다. 이렇게 상호 연결된 하드웨어로 인간의 오감을 적절하게 자극하여 몰입감을 더하여 준다. 아직 많은 부분이 모자라지만 많은 연구와 노력으로 빠른 시간 안에 거의 인간이 느낄 수 있는 느낌을 가상현실에서도 현실과 같이 느낄 수 있을 것이다. 이 논문에서는 가상현실시스템의 기본적인 정의와 개념 그리고 종류를 알아보고 그 중에서 몰입감이 뛰어난 CAVE형의 가상현실시스템에 대하여 개념분석을 하였고 다음으로 2003년 KISTI(한국과학기술정보연구원)에서 만들어진 경복궁(문화 원형 Content)을 가상현실시스템에서 복원 과정을 Design process를 거쳐 제작되는 과정을 통해 가상현실시스템에서의 VR프로그래밍 방법과 모델링 방법을 제시하였다. 이러한 과정을 통해 몰입형 가상현실 시스템의 활용성에 대해 알아보았고 지금 시점에서 이러한 CAVE형 가상현실 시스템의 활용방안에 대하여 연구해 보았다. 끝으로 가상현실시스템을 활용한 문화재 복원 과정에서 나타난 문제점에 대하여 서술 하고 가상 현실 시스템의 활용 방안을 제시한다.

  • PDF

건설 현장 악력 작업안전 기준 설정에 관한 실험적 연구 (An Experimental Study on Establishing Criteria of Gripping Work in Construction Site)

  • 손기상;이인홍;최만진;안병준
    • 한국안전학회지
    • /
    • 제10권3호
    • /
    • pp.81-95
    • /
    • 1995
  • Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC+has been used for the study.

  • PDF

에이전트기반 개방병원 간호기록시스템 설계에 관한 연구 (A Study on Design of Agent based Nursing Records System in Attending System)

  • 김경환
    • 지능정보연구
    • /
    • 제16권2호
    • /
    • pp.73-94
    • /
    • 2010
  • 개방병원에 환자의 입원을 의뢰한 담당 의사들은 환자들의 상태와 제대로 된 간호서비스를 받고 있는지에 대한 정보를 간호기록을 열람함으로써 확인할 수 있다. 하지만 간호기록은 병원의 내부자료로써 외부기관에 쉽게 공개할 수 없는 자료이고 표준화가 확립되어 있지 않아 병원별로 다르게 작성되고 있어 필요한 정보를 공유하는데 많은 어려움이 따른다. 따라서 본 연구에서는 개방병원 간호기록의 작성과 공유를 지원하기 위한 시스템을 개발하고자 하였다. 본 시스템은 우선 간호기록을 실제로 작성하는 간호사의 편의성을 고려하여 간호기록항목사전을 설정하게 하고 간호사와 의사간의 지능형 에이전트를 이용한 협상으로 작성과 공개의 항목을 확정하도록 하였다. 이 모든 과정은 의료기관간의 네트워킹을 지원할 수 있도록 웹기반시스템으로 설계되었고 실제 구현을 통하여 실현가능성을 확인하였다.

핵융합로부품 시험을 위한 고열부하 시험시설 KoHLT-1 구축 (Development of a High Heat Load Test Facility KoHLT-1 for a Testing of Nuclear Fusion Reactor Components)

  • 배영덕;김석권;이동원;신희윤;홍봉근
    • 한국진공학회지
    • /
    • 제18권4호
    • /
    • pp.318-330
    • /
    • 2009
  • 본 한국원자력연구원에서는 국제열핵융합실험로(ITER)의 일차벽을 개발하기 위해 그라파이트 히터를 이용한 고열부하 시험시설 KoHLT-1(Korea Heat Load Test facility-1)을 구축하였으며, 현재 정상적으로 가동되고 있다. KoHLT-1의 주목적은 Be-CuCrZr-SS의 이종 금속이 HIP 방법에 의해 접합된 ITER 일차벽 mockup의 접합 건전성을 확인하는데 있다. KoHLT-1은 판형 그라파이트 히터, 냉각 jacket이 부착된 상자형 시험용기, 직류 전원, 냉각계통, He 기체 공급계통과 각종 진단계통으로 구성되어 있으며, 이 모든 시설은 Be 처리가 가능한 특수 정화계통이 설치된 실험실에 설치되었다. 그라파이트 히터는 두개의 시험 대상물 사이에 설치되며, 시험대상물과의 거리는 $2{\sim}3\;mm$이다. 시험 대상물의 크기와 요구되는 열유속에 따라 여러 가지의 그라파이트 히터를 설계, 제작하였으며, 전기 저항은 고온 운전 중에 $0.2{\sim}0.5{\Omega}$이 되도록 하였다. 히터는 100V/400 A의 직류전원에 연결되어 있으며, PC와 multi function module로 구성된 전류 조정계통에 의해 미리 프로그램되어 있는 패턴으로 전류를 자동 조절하게 된다. 두 시험대상물에 인가되는 열유속은 calorimetry법에 의해 냉각수의 입, 출구 온도와 유량을 측정하여 얻게 된다. 여러 가지 형태의 ITER 일차벽 Be mockups에 대해 고열부하 시험을 수행하였으며, 시험을 통하여 KoHLT-1 고열부하 시험 시설의 성능이 확인되었고, 24시간 이상의 연속 운전에 있어서도 그 신뢰성이 입증되었다.

Ortho-phenylphenol을 주성분을 하는 훈증소독제의 Pseudomonas aeruginosa와 Enterococcus hirae에 대한 살균효과 (Bactericidal Efficacy of a Fumigation Disinfectant with Ortho-phenylphenol as an Active Ingredient Against Pseudomonas Aeruginosa and Enterococcus Hirae)

  • 차춘남;박은기;김용팔;유은아;유창열;홍일화;김석;이후장
    • 한국식품위생안전성학회지
    • /
    • 제29권1호
    • /
    • pp.60-66
    • /
    • 2014
  • 본 연구는 P. aeruginosa와 E. hirae을 대상으로 ortho-phenylphenol 20%를 함유한 훈증소독제, Fumagari $OPP^{(R)}$의 살균효과를 평가하기 위해 수행되었다. 예비 시험에서, P. aeruginosa와 E. hirae의 현탁액 균수는 각각 $2.8{\times}10^8$$3.6{\times}10^8CFU/mL$이었으며, 모든 훈증소독제에 노출시킨 담체의 균수는 모두 평판배지법과 여과법으로 배양한 시험균주 현탁액의 균수의 50%보다 많았다. 또한, 대조 담체로부터 회복된 P. aeruginosa와 E. hirae 균수는 각각 $2.9{\times}10^6$$2.7{\times}10^6CFU/mL$이었다. 훈증소독제의 살균효과 시험에서는, 훈증소독제를 처리한 담체의 P. aeruginosa와 E. hirae의 감소 균수는 각각 6.46와 5.19 logCFU/mL로 나타났다. 이상의 결과로부터, 훈증소독제, Fumagari $OPP^{(R)}$는 P. aeruginosa와 E. hirae에 대해 효과적인 살균력을 갖는 것으로 확인되었으며, 병원성 세균에 오염된 식품재료 및 주방용품의 소독에 적용할 수 있을 것으로 사료된다.

공기조화, 냉동 분야의 최근 연구 동향: 2006년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006)

  • 한화택;신동신;최창호;이대영;김서영;권용일
    • 설비공학논문집
    • /
    • 제20권6호
    • /
    • pp.427-446
    • /
    • 2008
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

한국 특촬물 시리즈에 나타난 과학적 인식 - <지구용사 벡터맨>을 중심으로 (Scientific Awareness appearing in Korean Tokusatsu Series - With a focus on Vectorman: Warriors of the Earth)

  • 박소영
    • 공연문화연구
    • /
    • 제43호
    • /
    • pp.293-322
    • /
    • 2021
  • <지구용사 벡터맨>은 한국 특촬물 시리즈를 대표하는 작품이자 특촬물 시리즈 중 가장 큰 성공을 거둔 작품이다. 이 작품이 등장할 수 있었던 것은 80년대 중반부터 계속된 일본 특촬물의 인기와 로봇 애니메이션의 유행이 있었기 때문이다. 한국의 텔레비전 방송에서는 어린이 프로그램의 고질적인 문제인 수입프로그램의 범람과 거듭된 재방송으로 인해 국산 어린이 프로그램에 대한 필요성이 꾸준히 대두되고 있었다. 그러나 90년대 중반 한국 애니메이션의 인기가 줄어들면서 애니메이션 제작에 대한 부담감 또한 증가할 수밖에 없었다. 그로 인해 <지구용사 벡터맨>은 애니메이션이 아닌 특촬물로 제작되었는데, 이때 특수효과기술을 방송국에서도 사용할 수 있는 환경이 조성되던 시기적 특성과 맞물려 컴퓨터 시각효과가 적극적으로 사용되었다. <지구용사 벡터맨>이라는 새로운 국산 특촬물 시리즈의 등장에 대한 반응은 폭발적이었다. 벡터맨 시리즈는 이제 우주의 과학기술이라는 모호한 단어 대신 DNA 합성, 뇌세포 변이, 특수심리조종장치 등 구체적인 과학적 용어들을 활용해 우주적 존재들의 능력을 설명한다. 비록 그 과정과 원인에 대해서 상세하게 말할 수는 없으나 공상과학이 아닌 구체적 용어들로 정의되는 모습은, 이제 한국사회에 과학적 상상력이 구체적인 형태로 발현되고 있음을 보여 준다. 그리고 벡터맨과 우주인들의 동등한 관계는 지구의 과학 용어로 설명되는 우주의 과학은 지구로 대변되는 한국 과학 기술 발전에 대한 자신감의 표현이기도 하다. 그러나 여성캐릭터들은 과학의 영역으로 진출하지 못하고 여전히 비과학적 존재로 묘사되며 과학적 인식에 대한 한계를 드러낸다.