• 대한치과교정학회지
• /
• 제38권6호
• /
• pp.376-387
• /
• 2008

본 연구의 목적은 pendulum 장치, 미니임플란트를 동반한 pendulum장치(펜듈럼), 오픈코일 스프링 및 미니임플란트를 동반한 오픈코일 스프링 이용 시 각각의 치아이동 양상을 3차원적으로 분석하는 데 있었다. 상악 좌측 치조골 및 치아 모형을 제작하고, Calorific $machine^{(R)}$을 이용하여 모형상에서 대구치를 3 mm 원심 이동시켰다. 실험은 5회씩 반복 실시하였다. 모델을 전산화 단층 촬영한 후 V-$Works^{TM}$를 이용하여 3차원 모델을 제작하였다. $Rapidform^{TM}$상에서 3차원적으로 이동방향과 이동량을 계측하였고, 각각의 장치에 관한 통계적 유의성을 검정하였다. 교정용 미니임플란트를 간접 골성 고정원으로 이용하여 오픈코일 스프링으로 구치부를 원심으로 이동시켰을 때가 치체이동에 가장 가까운 이동양상을 보였고, 고정원 소실도 적게 나타났다 (p < 0.05). 오픈코일 스프링, 펜듈럼 장치 모두 미니임플란트를 부가적으로 이용했을 때 고정원 소실량이 적었다 (p < 0.05). 미니임플란트를 이용하지 않은 경우에는 두 장치의 고정원 소실량이 비슷하였다. 미니임플란트의 이용 여부와 관계없이 펜듈럼 장치로 상악 구치 원심 이동 시 오픈코일 스프링에 비해 제1대구치가 조절성 경사이동 양상으로 이동되었고 (p < 0.05), 제2대구치는 비조절성 경사이동 양상을 보였으며, 치관의 협측경사이동이 일어났다 (p < 0.05). 이와 같은 결과를 근거로 간접 골성 고정원을 이용한 오픈코일 스프링이 상악 구치의 원심 치체이동에 가장 효과적인 장치였으며, 펜듈럼 장치를 이용한 구치부 원심이동 시에는 추가적인 조절이 필요하다고 할 수 있다.

• Korean Journal of Radiology
• /
• 제22권3호
• /
• pp.464-475
• /
• 2021

Objective: This study aimed to evaluate the tumor doubling time of invasive lung adenocarcinoma according to the International Association of the Study for Lung Cancer (IASLC)/American Thoracic Society (ATS)/European Respiratory Society (ERS) histologic classification. Materials and Methods: Among the 2905 patients with surgically resected lung adenocarcinoma, we retrospectively included 172 patients (mean age, 65.6 ± 9.0 years) who had paired thin-section non-contrast chest computed tomography (CT) scans at least 84 days apart with the same CT parameters, along with 10 patients with squamous cell carcinoma (mean age, 70.9 ± 7.4 years) for comparison. Three-dimensional semiautomatic segmentation of nodules was performed to calculate the volume doubling time (VDT), mass doubling time (MDT), and specific growth rate (SGR) of volume and mass. Multivariate linear regression, one-way analysis of variance, and receiver operating characteristic curve analyses were performed. Results: The median VDT and MDT of lung cancers were as follows: acinar, 603.2 and 639.5 days; lepidic, 1140.6 and 970.1 days; solid/micropapillary, 232.7 and 221.8 days; papillary, 599.0 and 624.3 days; invasive mucinous, 440.7 and 438.2 days; and squamous cell carcinoma, 149.1 and 146.1 days, respectively. The adjusted SGR of volume and mass of the solid-/micropapillary-predominant subtypes were significantly shorter than those of the acinar-, lepidic-, and papillary-predominant subtypes. The histologic subtype was independently associated with tumor doubling time. A VDT of 465.2 days and an MDT of 437.5 days yielded areas under the curve of 0.791 and 0.795, respectively, for distinguishing solid-/micropapillary-predominant subtypes from other subtypes of lung adenocarcinoma. Conclusion: The tumor doubling time of invasive lung adenocarcinoma differed according to the IASCL/ATS/ERS histologic classification.

• 대한소아치과학회지
• /
• 제40권2호
• /
• pp.106-117
• /
• 2013

견치의 맹출은 영구치열의 이행에 중요하다. 견치 매복의 원인으로 유치의 조기 상실 또는 만기 잔존, 신생물 등이 있으며 측절치 이상이 상악 견치 매복을 야기할 수 있다. 치료되지 않은 매복 견치는 부정교합, 낭종 등을 야기하고 교정치료를 복잡하게 한다. 이 연구의 목적은 매복된 상악 견치의 위치를 조사하여 치료 및 합병증과의 관계를 규명하는 것이다. 상악 견치 매복으로 진단된 89명의 파노라마사진과 전산화단층영상을 사용하여 견치의 위치를 평가하였다. 시행된 치료와 합병증과의 상관관계에 대해 조사하였다. 가장 흔한 매복 위치는 치열궁 영역이었고 협측과 구개측 순이었다. 교정적 견인이 가장 빈번히 선택되었으며 합병증으로는 인접치를 변위시키는 경우가 가장 흔했다. 협측에 매복 시 변위를 일으키는 경향이 높았고, 협측에 매복될수록 교정적 견인이 덜 시행되었다. 중절치 근심에 매복 시 치근 흡수를 일으키는 경향이 더 높았다. 그러므로 상악 견치에 대한 검진을 통해 조기 진단과 적절한 치료의 시행이 필요하다.

• 한국임상수의학회지
• /
• 제37권3호
• /
• pp.163-167
• /
• 2020

A 13-month-old, 3.3 kg castrated male Shih-tzu presented with right hindlimb lameness. The physical examination revealed atrophy of the right thigh muscles, hyperextension of the stifle joint and external torsion of the tibia. On the radiographic examination, patella alta and genu recurvatum were observed. A biapical deformity of the tibia and external torsion of the distal tibia were detected by computed tomography (CT). A three-dimensional (3D) printed bone model was designed and constructed for the preoperative plan prior to surgery. Rectus femoris muscle transposition, femoral shortening ostectomy and open wedge osteotomy of the distal tibia were performed using hybrid external skele/t0al fixation (hybrid-ESF). A dynamic stifle flexion apparatus was used to prevent recurrence of a quadriceps contracture (QC). Intense physiotherapy was administered postoperatively. The dog began to use the affected limb one week after surgery. Functional improvement in the affected limb was observed, and full weight-bearing was possible at 3 months after surgery. Union of the osteotomy lines was observed at 3 months, and the stifle joint was fully movable at 7 months after surgery. Regarding the treatments for QC, these methods may be excellent candidates, as they do not lead to severe damage to the limb or amputation.

• 대한의용생체공학회:의공학회지
• /
• 제29권6호
• /
• pp.451-456
• /
• 2008

Total knee arthroplasty(TKA) using computer-assisted navigation has been increased in order to improve the accuracy of femoral and tibial components implantation. Recently, a few clinical studies have reported on the femoral stress fracture after TKA using computer-assisted navigation. The purpose of this study is to investigate the stress concentration around the femoral pin-hole for different pin-hole diameter, the modes of pin penetration by finite element analysis to understand the effects of pin-hole parameters on femoral stress fracture risk. A three-dimensional finite element model of a male femur was reconstructed from 1 mm thick computed tomography(CT) images. The bone was rigidly fixed to a 25 mm above the distal end and 1500 N of axial compressive force and 12 Nm of axial torsion were applied at the femoral head. For all cases, transcortical pin penetration mode showed the highest stress fracture risk and unicortical pin penetration mode showed the lowest stress concentration. Pin-hole diameter increased the stress concentration, but pin number did not increase the stress dramatically. The results of this study provided a biomechanical guideline for pin-hole fracture risk of the computer navigated TKA.

• 대한의용생체공학회:의공학회지
• /
• 제38권1호
• /
• pp.49-55
• /
• 2017

The prevalence of obesity has noticeably increased worldwide over several decades with various complication. Even though anti-obesity drug treatments have been spotlighted by resulting in effective mean weight losses, its adverse effects cannot be overlooked. Thus, this study aimed to evaluate the effects of multi-frequency whole body vibration, one of the mechanical stimulus, as a countermeasure against obesity. Thirty-two-6-week-old C57BL/6J male mice were equally assigned to four groups: the Control group (CON, n = 8), the Sham group (Sham, n = 8), the sham with single frequency whole body vibration (S+V, n = 8), and the sham with multi frequency whole body vibration (S+MV, n = 8). After 4 weeks, morphologic changes in the adipose tissue were evaluated from three-dimensional images using in vivo micro-computed tomography. At 4 weeks, the volume of the abdominal adipose tissue, which had the highest value in Sham group, noticeably reduced in S+MV group compared to it in S+V group. These results implied that the accumulation of abdominal adipose tissue can be effectively reduced through applying multi-frequency whole body vibration.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.141-144
• /
• 1997

Femoral neck anteversion is the angle between the neck and the knee axis projected on a plane perpendicular to the longitudinal axis. Conventional methods that use cross-sectional Computed Tomography(CT) images to estimate femoral anteversion have several problems because of the complex 3D structure of the femur. These are the ambiguity of defining the longitudinal axis, the femoral neck axis and condylar line, and the dependence on patient positioning. Especially the femoral neck axis that is known as a major source of error is hard to determine from a single or multiple 2D transverse images. So we developed a new method for measuring femoral anteversion by 3D modeling method. In this method, femoral head is modeled as a sphere. The center of femoral neck is the mid-point of the 2D reconstructed oblique image in the femoral neck part. Then neck axis is a line connecting foregoing two centers. We model the longitude of femur as a cylinder, and the long axis is defined from the fitted cylinder. The knee axis which is tangent to the back of the femoral condyles is easily determined by table-top method. By the definition of femoral anteversion, the femoral anteversion is easily calculated from this model.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.51.1-51.8
• /
• 2019

Purpose: It has been reported before that the amount of pharyngeal airway space (PAS) significantly decreases following mandibular setback (MS) surgery in patients with mandibular prognathism (MP). Further, MP patients with an anterior open-bite (AOB) presentation may show a larger decrease in PAS compared with those without AOB. However, studies on postoperative PAS changes in MP patients with AOB remain rare. This study sought to evaluate changes in PAS and hyoid bone positioning following MS surgery in MP patients with and without AOB. Patients and methods: Twenty patients who underwent two jaw surgery involving MS movement were included. Patients were divided into a non-AOB group (n = 10; overbite > 2 mm) and an AOB group (n = 10; overbite < - 4 mm). Three-dimensional changes in PAS and hyoid bone positioning were compared and statistically evaluated pre- and postoperatively using computed tomography (CT). Results: The mean magnitude of MS was 6.0 ± 2.8 mm and 5.6 ± 3.2 mm in the non-AOB group and AOB group, respectively. The oropharyngeal volume and upper hypopharyngeal volume were significantly reduced after surgery in both the groups (p = 0.006 and p = 0.003), while the retroglossal cross-sectional area was significantly reduced only in the AOB group (p = 0.028). Although the AOB group showed a larger decrease in PAS, the difference was not statistically significant between the groups. The position of the hyoid bone showed significant posterior and inferior displacement only in the AOB group, while the vertical displacement of the hyoid bone showed a statistically significant difference between the two groups. Conclusion: PAS was significantly decreased after MS in both the groups, while only the AOB group presented a statistically significant reduction in the retroglossal cross-sectional area. Vertical displacement of the hyoid bone showed a statistically significant difference between the groups, while the PAS change was not. Surgeons should be aware of potential postoperative airway problems that may arise when performing MS surgeries.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.703-708
• /
• 2013

고관절 전치환술은 대퇴골두와 비구 부분이 손상되어 제 기능을 하지 못하였을 때, 인공 고관절로 대체하는 수술로서 인체에는 많은 양의 절개를 필요로 하며 장기간의 회복시간과 재활시간을 필요로 한다. 최소침습술은 환자에게 흉터와 근육절개를 최소화하고, 회복시간을 단축하여 미관상 흉터가 적어 가장 선호되는 수술 방법이다. 이 논문에서는 최소침습술이 가능한 메커니컬 스템(Mechanical stem)을 기어의 원리를 이용하여 개발하였다. 재치환술을 할 경우에는 스템 전체를 교체할 필요 없이 일부 부품만을 교체하여 수술 시간을 단축할 수 있도록 설계하였으며, 아크릴 소재로 모형을 제작하여 작동에 문제가 없는 것을 확인하였다. 3D Bio-CAD 모델링 기법을 통하여 메커니컬 스템의 기하학적 모델링을 하였다. 실험 대상자의 고관절 부위는 컴퓨터 단층촬영 영상데이터를 기반으로 3차원 재구축을 하였고, 가상 시술 환경 조건에서 몸무게보다 더 과중한 하중을 적용하여 메커니컬 스템의 안전성을 유한요소해석으로 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제37권2호
• /
• pp.68-74
• /
• 2016

In this study, we investigated the rotational characteristics which were comprised of directionality and linearity of target registration error (TRE) as a study in advance to enhance the accuracy of contour-based registration in neuronavigation. For the experiment, two rigid head phantoms that have different faces with specially designed target frame fixed inside of the phantoms were used. Three-dimensional coordinates of facial surface point cloud and target point of the phantoms were acquired using computed tomography (CT) and 3D scanner. Iterative closest point (ICP) method was used for registration of two different point cloud and the directionality and linearity of TRE in overall head were calculated by using 3D position of targets after registration. As a result, it was represented that TRE had consistent direction in overall head region and was increased in linear fashion as distance from facial surface, but did not show high linearity. These results indicated that it is possible for decrease TRE by controlling orientation of facial surface point cloud acquired from scanner, and the prediction of TRE from surface registration error can decrease the registration accuracy in lesion. In the further studies, we have to develop the contour-based registration method for improvement of accuracy by considering rotational characteristics of TRE.