• Imaging Science in Dentistry
• /
• v.53 no.3
• /
• pp.221-227
• /
• 2023

Purpose: This study was performed to develop a linear regression model using the pulp-to-tooth volume ratio (PTVR) ratio of the maxillary canine, assessed through cone-beam computed tomography (CBCT) images, to predict chronological age (CA) in Indonesian adults. Materials and Methods: A sample of 99 maxillary canines was collected from patients between 20 and 49.99 years old. These samples were obtained from CBCT scans taken at the Universitas Padjadjaran Dental Hospital in Indonesia between 2018 and 2022. Pulp volume (PV) and tooth volume (TV) were measured using ITK-SNAP, while PTVR was calculated from the PV/TV ratio. Using RStudio, a linear regression was performed to predict CA using PTVR. Additionally, correlation and observer agreement were assessed. Results: The PTVR method demonstrated excellent reproducibility, and a significant correlation was found between the PTVR of the maxillary canine and CA(r= -0.74, P<0.01). The linear regression analysis showed an R² of 0.58, a root mean square error of 5.85, and a mean absolute error of 4.31. Conclusion: Linear regression using the PTVR can be effectively applied to predict CA in Indonesian adults between 20 and 49.99 years of age. As models of this type can be population-specific, recalibration for each population is encouraged. Additionally, future research should explore the use of other teeth, such as molars.

• Imaging Science in Dentistry
• /
• v.53 no.2
• /
• pp.153-159
• /
• 2023

Purpose: The objective of this study was to assess the fractal dimension, lacunarity, trabecular microarchitecture parameters, and cortical linear measurements in the mandibles of male and female individuals to identify differences between them. Materials and Methods: In total, 116 cone-beam computed tomography scans of healthy individuals of different ages (57 men and 59 women, aged between 20 and 60 years) were selected. The following bone parameters were measured: 1) buccal, lingual, and basal cortical bone thickness in 5 standard parasagittal sections (the midline, the left and right sides of the lower lateral incisors, and the left and right sides of the lower canines); 2) the bone volume fraction of 10 sequential axial sections from each patient by creating a volume of interest in the area between the lower canines; and 3) fractal dimension and lacunarity using grayscale images of the same region of the volume of interest in the anterior mandible. Spearman correlation coefficients and the Mann-Whitney test were used. Results: A significant and positive correlation was found between age and cortical thickness, especially in the region of the central incisors. Significant differences between sexes in terms of fractal dimension, lacunarity, and bone volume were found. Women revealed lower fractal dimension values and higher lacunarity and bone volume ratio values than men. Conclusion: Fractal dimension, lacunarity, trabecular bone volume, and cortical thickness were different between men and women of different ages.

• The korean journal of orthodontics
• /
• v.53 no.4
• /
• pp.232-240
• /
• 2023

Objective: This study aimed to evaluate the zygomaticotemporal suture (ZTS) maturation, analyze the age distribution patterns of ZTS maturation stages, and investigate the relationship between ZTS and cervical vertebral maturation (CVM). Methods: A total of 261 patients who underwent cone-beam computed tomography (112 males, mean age, 13.1 ± 3.3 years; 149 females, mean age, 13.7 ± 3.1 years) were examined to evaluate the ZTS stages. The ZTS stages were defined based on a modified method from previous studies on zygomaticomaxillary sutures. Differences between groups and correlations between indicators were analyzed using the Spearman correlation test, intraclass coefficient of correlation (ICC), one-way analysis of variance and rank sum test. Statistical significance was set at p < 0.05. The diagnostic value of CVM stages in identifying ZTS maturation stages was evaluated using positive likelihood ratios (LRs). Results: A positive relationship was found between the ZTS and CVM stage (r = 0.747, ICC = 0.621, p < 0.01) and between the ZTS stage and chronological age (r = 0.727, ICC = 0.330, p < 0.01). Positive LRs > 10 were found for several cervical stages (CSs), including CS1 and CS2 for the diagnosis of stage B, CS1 to CS3 for the diagnosis of stages B and C, and CS6 for the diagnosis of stages D and E. Conclusions: The ZTS maturation stage may be more relevant to the CVM stage than to the chronological age. The CVM stages can be good indicators for clinical decisions regarding maxillary protraction, except for CS4 and CS5.

• Clinical and Experimental Pediatrics
• /
• v.48 no.3
• /
• pp.276-283
• /
• 2005

Purpose : Visceral fat accumulation plays a major role in metabolic complications of obesity. It is known that nonalcoholic fatty liver in obese adults is associated with visceral fat accumulation. Body mass index(BMI) is used as the index of obesity in children. The aim of this study is to evaluate the correlation of BMI and visceral adipose tissue(VAT), and the correlation of BMI, body fat distribution, aminotransferases, and severity of fatty liver. Methods : Twenty three obese children with fatty liver diagnosed by non-contrast abdominal computed tomography(CT) were included in this study. Data on BMI, aminotransferase levels were collected from clinical records. Visceral adipose area was evaluated with CT. Results : BMI had a singnificant correlation with VAT(r=0.51719, P=0.0115). The severity of fatty liver had no significant correlations with BMI(r=-0.11938, P=0.5876), VAT(r=-0.31234, P=0.1468), aspartate aminotransferase(AST)(r=0.12729, P=0.5628) or alanine aminotransferase(ALT)(r=-0.00179, P=0.9935). Conclusion : BMI in obese children was correlated with VAT. But the severity of fatty liver cannot be assessed by BMI, VAT or aminotransferase levels.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.315-325
• /
• 2023

The purpose of this study was to predict abdominal obesity with 3-Dimensional computed tomography (3D CT) measurements of kidneys by analyzing the correlation between kidney sizes and abdominal obesity level. The subjects were 178 healthy adults without underlying diseases who had a comprehensive health examination at the Health Medical Center of Jesus Hospital in Jeonju. Abdominal obesity was measured by CT cross-sectional image at the level of the umbilicus and divided into visceral fat area, subcutaneous fat area, visceral fat/total fat ratio. The average comparison of kidney sizes classified according to abdominal obesity were performed through one-way analysis of variance (ANOVA) and Scheffe test. Pearson correlation analysis was performed to correlate all measurement values. The results of kidney size ANOVA analysis according to abdominal obesity were as follows. The means of kidney measurements according to visceral fat classification were significantly different in all kidney measurements (p<0.05). And in case of subcutaneous fat classification, the means of kidney measurements by 3D CT of the severe obesity group were significantly different in the right kidney width (p<0.05). In case of visceral fat area/total fat area ratio, the means of kidney measurements by 3D CT of the severe obesity group were significantly different in both kidneys width (p<0.05). Pearson correlation between kidneys measurements and CT abdominal obesity showed that visceral fat area had the highest correlation with the left kidney width measured by 3D CT (r=0.467) and subcutaneous fat area had correlation with the right kidney width measured by 3D CT (r=0.249). The visceral fat area/total fat area ratio had correlation with the left kidney width measured by 3D CT (r=0.291).

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.295-299
• /
• 2019

Purpose: This clinical pilot study was performed to determine the effectiveness of dual-energy cone-beam computed tomography (DE-CBCT) in measuring bone mineral density (BMD). Materials and Methods: The BMD values obtained using DE-CBCT were compared to those obtained using calibrated multislice computed tomography (MSCT). After BMD calibration with specially designed phantoms, both DE-CBCT and MSCT scanning were performed in 15 adult dental patients. Three-dimensional (3D) Digital Imaging and Communications in Medicine data were imported into a dental software program, and the defined regions of interest (ROIs) on the 3-dimensional surface-rendered images were identified. The automatically-measured BMD values of the ROIs (g/㎤), the differences in the measured BMD values of the matched ROIs obtained by DE-CBCT and MSCT 3D images, and the correlation between the BMD values obtained by the 2 devices were statistically analyzed. Results: The mean BMD values of the ROIs for the 15 patients as assessed using DE-CBCT and MSCT were 1.09±0.07 g/㎤ and 1.13±0.08 g/㎤, respectively. The mean of the differences between the BMD values of the matched ROIs as assessed using DE-CBCT and calibrated MSCT images was 0.04±0.02 g/㎤. The Pearson correlation coefficient between the BMD values of DE-CBCT and MSCT images was 0.982 (r=0.982, P<0.001). Conclusion: The newly developed DE-CBCT technique could be used to measure jaw BMD in dentistry and may soon replace MSCT, which is expensive and requires special facilities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.139-144
• /
• 2012

The purpose of this study was to evaluate the accuracy and reproducibility of measuring the size of unerupted permanent tooth via cone beam computed tomography(CBCT). Ten children were scanned with dental CBCT, and 3-dimensional reconstruction of the dentitions were generated CBCT. Mesio-distal dimension and buccolingual dimension of the teeth were made directly on the model with a high-precision digitalcaliper and on the CBCT by using three-dimensional dental imaging software. Reliability and accuracy were assessed by using intraclass correlation and paired $t$-tests. ($p$ <0.05) The results were as follows : 1. Intraclass correlations were above 0.9 for Both the CBCT and the model measurements, showinghigh reliability. 2. Although there were high correlation values(r=0.91) between CBCT and model messurement methods, comparisons between the CBCT and model messurement methods showed a statistically significant difference($p$ <0.05). 3. The CBCT measurements tended to slightly underestimate by 0.2 mm. But, the systematic difference of CBCT measurements were clinically acceptable Therefore, CBCT measurement method can be used to measure the size of unerupted teeth in a sufficiently accurate way.

• Journal of Veterinary Clinics
• /
• v.27 no.6
• /
• pp.686-692
• /
• 2010

Computed tomography (CT) is considered as gold standard in evaluating pancreatitis in human, but there have been only a few studies in veterinary field. Balthazar CT severity index (CTSI) used to assess the severity of acute necrotizing pancreatitis in human could be applicable to dogs, because the severity of acute pancreatitis depends on the area of pancreatic necrosis in dogs more than in human. In this study, 25 adult, clinically healthy beagle dogs were used. CT examinations was performed in normal pancreas, positive control group and acute necrotizing pancreatitis induced by autologous bile injection. Balthazar CTSI was applied to canine acute necrotizing pancreatitis in contrastenhanced CT image and compared with the result of histopathologic examination. The Hounsfield unit (HU) of normal canine pancreas was $52.44{\pm}4.58$ and the density was significantly decreased in acute necrotizing pancreatitis (P < .05). In contrast-enhanced CT examination, pancreatic density was decreased significantly and this area was compatible to pancreatic necrosis. Balthazar CTSI showed positive correlation with histopathologic evaluation with a sensitivity of 100% and a specificity of 88.89%. Balthazar CTSI can be applied to evaluate the severity of acute necrotizing pancreatitis in dogs.

• Imaging Science in Dentistry
• /
• v.54 no.2
• /
• pp.147-157
• /
• 2024

Purpose: The aim of this study was to explore the correlations of cone-beam computed tomographic findings with the apnea-hypopnea index in patients with obstructive sleep apnea. Materials and Methods: Forty patients with obstructive sleep apnea were selected from the ear-nose-throat (ENT) outpatient clinic, Faculty of Medicine, Mansoura University. Cone-beam computed tomography was performed for each patient at the end of both inspiration and expiration. Polysomnography was carried out, and the apnea-hypopnea index was obtained. Linear measurements, including cross-sectional area and the SNA and SNB angles, were obtained. Four oral and maxillofacial radiologists categorized pharyngeal and retropalatal airway morphology and calculated the airway length and volume. Continuous data were tested for normality using the Kolmogorov-Smirnov test and reported as the mean and standard deviation or as the median and range. Categorical data were presented as numbers and percentages, and the significance level was set at P<0.05. Results: The minimal value of the cross-sectional area, SNB angle, and airway morphology at the end of inspiration demonstrated a statistically significant association (P<0.05) with the apnea-hypopnea index, with excellent agreement. No statistically significant difference was found in the airway volume, other linear measurements, or retropalatal airway morphology. Conclusion: Cone-beam computed tomographic measurements in obstructive sleep apnea patients may be used as a supplement to a novel radiographic classification corresponding to the established clinical apnea-hypopnea index classification.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.135-140
• /
• 2012

Massive numbers of users of social networks share various types of information such as opinions, news, and ideas in real time. As a new form of social network, Twitter is a particularly useful information source. Studying influence can help us better understand the role of social networks. The popularity of social networks like Twitter is primarily measured by the number of followers. The number of followers in Twitter and the number of users exposed to news media are important factors in measuring influence. We chose Twitter and the New York Times as representative media to analyze the influence and present an empirical analysis of these datasets. When the correlation between the number of followers in Twitter and the number of users exposed to the New York Times is computed, the result is moderately high. The correlation between the number of users exposed to the New York Times and the number of sections including the users on it, was found to be very high. We measure the normalized influence score using our proposed expression based on the two correlation coefficients.