• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.660-661
• /
• 2008

Nanotubes fabricated with diverse materials show different hydrophobic properties. The hydrophobic property is one of key properties for possible applications to ion channels due to their affinity. This study focuses on the structures of water molecules inside nanotubes with varying hydrophobicity using molecular dynamics simulation. Hydrophobicity here is determined by varying the attraction term in Lennard-Jones potential. The number of water molecules inside hydrophilic nanotubes increase, as expected, and their mobilities also increase. This trend is rather discrete with increasing number of water molecules and this discreteness is attributed to hydrogen bond. We plan to perform energy analysis to understand these structural results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.271-276
• /
• 2000

Optimal neuro-control algorithm is extended to the control of a multi-degree-of-freedom structure. An active mass driver(AMD) system on the top roof used as a controller. The control signals are made by a multi-layer perceptron(MLP) which is trained by minimizing a sub-optimal performance index. The performance index is a function of both the output responses and the control signals. Structure having nonlinear hysteretic behavior is also trained and controlled by using proposed control algorithm. Bothe the time delay effect and the dynamics of hydraulic actuator are included in the simulation. Example shows that optimal neuro-control algorithm can be applicable to the multi-degree of freedom structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.339-344
• /
• 2011

In the past much effort has been made to utilize advanced computational fluid dynamic (CFD) programs for aeroelastic simulations and analysis. However, it is limited in the field of unsteady aeroelasticity due to enormous size of computer memory and unreasonably long CPU time. Recently, AAEMS(Aerodynamics is Aeroelasticity minus Structure) was developed for linear time-invariant, coupled fluid-structure systems. In this paper, to demonstrate further the efficiency and accuracy of the new model reduction method, we successfully examine AGARD 445.6 wing modeled by FLUENT CFD, FSIPRO3D and NASTRAN FEM(Finite Element Method) programs. Using the ROM(Reduced Order Modeling) one can predict flutter boundary as a function of the dynamic pressure.

• 대한환경공학회지
• /
• 제33권4호
• /
• pp.251-257
• /
• 2011

이산화탄소의 해양 지중저장에 대한 전산모사를 위해 실제 이산화탄소가 저장되는 해양 지중 저장층에 대한 3차원 전산모형을 개발하였다. 특히, 실제 저장층의 3차원 구조를 모사하기 위하여 공극의 크기를 불규칙(random)적으로 부여하는 수치적 방법을 고안하여 3차원 전산모형을 구성하였고, 이를 균일한 공극 구조의 경우와 비교하였다. 이렇게 구성된 3차원 공극모형 내의 초임계 이산화탄소 유동을 시뮬레이션하기 위하여 전산유체역학을 사용하였다. 이러한 초임계 이산화탄소의 시뮬레이션에는 실제 저장층의 환경 즉 온도 및 압력을 동일하게 모델링하여 적용하였다. 공극 구조가 $CO_2$의 유동에 미치는 영향을 살펴보기 위해, 세 가지 형태의 3차원 전산모형의 공극 구조 내부를 흐르는 초임계 이산화탄소 유동에 대한 수치해석을 수행하였으며, 특히 3차원 전산모형의 내부유동에 대한 압력강하 및 투수율을 계산하여 본 모형이 해양 지중저장의 전산모사에 적합한지를 판단하고, 이산화탄소 유량 증가에 따른 초임계 이산화탄소 유동의 특성을 살펴보았다.

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.476-483
• /
• 2007

이어도에 건설된 다목적 해양과학기지에서는 주위 대류 및 해류의 데이터 수집을 통해 기상, 어장예보 등의 기초 자료를 제공하는 것을 한 가지 목적으로 한다. 그런데 이어도 기지 구조물에 의한 해수 유동의 변화는 과학기지의 관측 데이터에 영향을 주어 정확한 자료 수집을 어렵게 하므로, 이어도 기지 구조물이 주위 유동에 미치는 영향을 분석하고 유동 정보 관측을 평가/보정하는 방법에 대한 연구가 필요하다. 본 연구에서는 이를 위한 기초연구로, 해류와 구조물 사이의 상호 작용을 모사 할 수 있는 알고리즘을 연구, 적용방법을 논의한다. 그 결과, 3차원 전산유체역학을 이용한 수치해석을 통해 이어도 기지 구조물 및 수중암초가 주위 유동에 미치는 영향을 연구하고 정확한 데이터 측정방법을 제안한다.

• Environmental Engineering Research
• /
• 제17권2호
• /
• pp.83-88
• /
• 2012

Currently, the technology of $CO_2$ capture and storage (CCS) has become the main issue for climate change and global warming. Among CCS technologies, the prediction of $CO_2$ behavior underground is very critical for $CO_2$ storage design, especially for its safety. Hence, the purpose of this paper is to model and simulate $CO_2$ flow and its heat transfer characteristics in a storage site, for more accurate evaluation of the safety for $CO_2$ storage process. In the present study, as part of the storage design, a micro pore-scale model was developed to mimic real porous structure, and computational fluid dynamics was applied to calculate the $CO_2$ flow and thermal fields in the micro pore-scale porous structure. Three different configurations of 3-dimensional (3D) micro-pore structures were developed, and compared. In particular, the technique of assigning random pore size in 3D porous media was considered. For the computation, physical conditions such as temperature and pressure were set up, equivalent to the underground condition at which the $CO_2$ fluid was injected. From the results, the characteristics of the flow and thermal fields of $CO_2$ were scrutinized, and the influence of the configuration of the micro-pore structure on the flow and scalar transport was investigated.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.117-123
• /
• 2011

The low electric power and high efficiency chips are required because of the appearance of smart phones. Also, high-capacity memory chips are needed. e-MMC(embedded Multi-Media Card) for this is defined by JEDEC(Joint Electron Device Engineering Council). The e-MMC memory for research and development is a memory mulit-chip module of 64GB using 16-multilayers of 4GB NAND-flash memory. And it has simplified the chip by using SIP technique. But mulit-chip module generates high heat by higher integration. According to the result of study, whenever semiconductor chip is about 10 $^{\circ}C$ higher than the design temperature it makes the life of the chip shorten more than 50%. Therefore, it is required that we solve the problem of heating value and make the efficiency of e-MMC improved. In this study, geometry of 16-multilayered structure is compared the temperature distribution of four different geometries along the numerical analysis. As a result, it is con finned that a multilayer structure of stair type is more efficient than a multilayer structure of vertical type because a multi-layer structure of stair type is about 9 $^{\circ}C$ lower than a multilayer structure of vertical type.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1061-1068
• /
• 2013

In this research, the design optimization of a composite sandwich has been performed for using as an airplane wing skin. Automated analysis framework for aero-structure interaction is used for calculating load data on the wing. For automated analysis framework, FLUENT is used for computational fluid dynamics (CFD) analysis. CFD mesh is generated automatically by using parametric modeling of CATIA and GAMBIT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Composite sandwich optimization is performed by NASTRAN SOL200. Design variables are thicknesses of the sandwich core and composite skin panel plies. The objective is to minimize the weight of the wing and constraints are applied for wing tip displacement, global failure index and local failure indexes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.433-449
• /
• 2021

In this study, a newly enhanced Fluid-Structure Interaction (FSI) model which incorporates mooring lines was used to simulate a floating structure. The model has two parts: a Computational Fluid Dynamics (CFD) model and a mooring model. The open-source CFD OpenFOAM® v1712 toolbox was used in the present study, and the convergence criteria and relaxation method were added to the computational procedure used for the OpenFOAM multiphase flow solver, interDyMFoam. A newly enhanced, tightly coupled solver, CoupledinterDyMFoam, was used to decrease the artificial added mass effect, and the results were validated through a series of benchmark cases. The mooring model, based on the finite element method, was established in MATLAB® and was validated against a benchmark analytical elastic catenary solution and numerical results. Finally, a model which simulates a floating structure with mooring lines was successfully constructed by connecting the mooring model to CoupledinterDyMFoam.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.504-512
• /
• 2002

Bileaflet mechanical valves have the complications such as hemolytic and thromboembolic events, leaflet damage, and leaflet break. These complications are related with the fluid velocity and shear stress characteristics of mechanical heart valves. This fact makes clear the importance of determining the fluid velocity and shear stress characteristics of mechanical heart valves, and requires a detailed understanding of these system properties and further substantial research. The first aim of current study is to introduce fluid-structure interaction method for calculation of unsteady and three-dimensional blood flow through bileaflet valve and leaflet behavior interacted with its flow, and to overcome the shortness of previous studies, where the leaflet motion has been ignored or simplified, by using FSI method. To accomplish this goal, a finite volume computational fluid dynamics code and a finite element structure dynamics code have been used concurrently to solve the flow and structure equations, respectively, to investigate the interaction between the blood flow and leaflet. Physiologic ventricular and aortic pressure waveforms were prescribed as flow boundary conditions. The interaction of aortic flow and valve motion were computed.