• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2594-2599
• /
• 2008

This study deals with the development of PMSM(Permanent Magnet Synchronous Motor) for automotive EDC(Electric Drive Compressor). We have already developed the previous version of PMSM. It showed the characteristics of small size and high efficiency. But noise and vibration levels were higher than target values, so it was impossible to apply. So, in order to reduce noise and vibration levels, many parameters like the numbers of slots, the numbers of winding turns, and slot open width were changed. As a result, noise level of newly developed PMSM was decreased about 36.9% at maximum operating frequency (8600 rpm), and was reduced about 37.7% at rated frequency (6000 rpm) with the same sized and more efficient PMSM.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1058-1063
• /
• 2004

This paper presents a new approach regarding thermal characteristics associated with a design of the high efficiency motor. Electrical conduction materials, such as coil and aluminum embedded in the core generate high heat exerting negative influence on both lifetime and performance of machine. Thus, it is necessary to design high efficiency motor considering heat transfer in order to improve motor performance and to be protected against overheating. In this paper, firstly, numerical analysis of electromagnetic field is carried out by the nonlinear transient finite element method (FEM). Secondly, the linear static FEA of magneto-thermal field is implemented by applying source current computed by the nonlinear transient analysis. FE results are validated in terms of electromagnetics and heat transfer by experiments. And then, the pseudo-transient topology optimization using a multi-objective function is performed. The proposed method is applied to a squirrel cage single-phase induction motor of the scroll compressor.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.97-103
• /
• 2008

최근 가전제품에 브러시리스 직류 (Brushless DC) 전동기의 센서리스 드라이브를 적용시키는 사례가 증가하고 있다. 특히 사람들의 삶의 질이 향상 됨에 따라 가정에서 가장 밀접하게 연관되어 있는 냉장고, 에어컨과 같은 가전제품에 가청소음을 줄여 보다 편안하고 안락한 생활을 추구하고 있다. 본 논문에서는 브러시리스 직류전동기에 랜덤 PWM을 적용한 냉장고용 압축기의 저가형 센서리스 드라이브를 이용하여 기존 드라이브 보다 가격과 소음을 줄일 수 있음을 실험하였다. 이러한 실험으로 전자적 소음을 줄임으로써 소음에 질을 향상시킬 수 있음을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제39권4호
• /
• pp.293-299
• /
• 2015

여러 산업분야에서 다양한 원심압축기가 사용되고 있다. 따라서 사용자의 요구에 맞는 원심압축기의 설계가 복잡해졌고, 최적화된 설계점을 찾는 것은 더욱 어려워졌다. 전통적으로 효율은 최적화의 중요한 요소이다. 본 연구에서는 효율 외에도 압축기의 무게를 고려하여 설계하였다. 본 연구의 목적은 압축기의 효율과 무게를 고려할 때에 그 고려하는 가중치의 변화에 따라 설계의 경향성이 나타남을 확인하는 것에 있다. 또한, 이를 바탕으로 초기 설계 단계에서 객관적인 설계점을 선택할 수 있음을 보여주는데 있다. 본 연구에서는 베인이 없는 디퓨저를 한정하여 연구하였다. 최적화를 위해서 크리깅을 사용하였고, 1차원 설계 프로그램의 표본을 적절히 이용하였다. 설계공간을 적절히 가정하였고, 설계공간 내에서 최적설계점을 계산하였다.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.6-9
• /
• 2004

This paper deals with the noise evaluation technique of a reciprocating air-compressor and its noise reduction. The reciprocating air-compressors are widely used in the small, medium sized industrial firms, and lots of their employees are affected and irritated by their noise in the workplace. Thus, noise control actions should be taken appropriately by considering the hearing loss due to the occupational noise exposure. Lead-wrapping techniques are employed to identify the contribution of principal noise sources which are generally known as motor, belts, suction/discharge valves, moving pistons, and flow-induced noise caused by edges or discontinuities along the flow path e.g. expansions, contractions, junctions and bends etc .. As a result, main noise sources of the air-compressor can be categorized by the suction/discharge noise, valve noise, and compressed-air tank noise. Based on the investigations, mufflers are designed to reduce both the suction/discharge noise and the compressed-air tank noise. Instead of the conventional valve plate, polyethylene resin is used as a new one for the reduction of valve impact noise. In addition, attempts are made to reduce the valve noise propagation to the cylinder head and the compressor tank by using the insulation casings. As a result of the countermeasure plans, it can be achieved that the noise reduction of the air-compress is up to 10dB.

• 전자공학회논문지
• /
• 제50권4호
• /
• pp.212-218
• /
• 2013

본 논문에서는 위상지연필터를 이용한 리니어 모터 피스톤 진폭 추정기를 구현하였다. 리니어 컴프레서가 적용된 냉장고나 에어컨의 냉각능력을 제어하기 위해서는 단위시간동안 피스톤의 움직인 거리, 즉 피스톤의 속도를 제어해야 하는데 이때 리니어 모터의 주파수나 스트로크를 조정함으로써 가능하다. 이때, 주파수를 고정하고 스트로크를 변화시키는 것이 일반적이다. 스트로크, 즉 피스톤 진폭을 정확하게 추정하는 것이 리니어 컴프레서의 동특성을 좌우하는데, 본 연구에서는 위상지연필터를 이용한 피스톤 진폭 추정기를 제안하고 성능이 우수함을 모의실험을 통해 확인하였다.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.24-30
• /
• 2011

500W class MTG(Micro turbine generator) operating at 400,000 rpm is under development. From the cycle analysis, it is decided that the self-sustaining speed of MTG is 200,000rpm and the generating speed is 400,000 rpm. Therefore, motor should be designed so that it is able to rotate the rotor up to 200,000rpm and generator should designed so that it is able to generate 500W output at 400,000rpm. First step to design motor/generator is to determine the power and efficiency requirement. Not only the power into the compressor and from the turbine at the operating speed but also the mechanical and electrical losses should be considered in determining the power and efficiency requirement. This study presents the procedure and the results of determining the power and efficiency requirement considering the mechanical and electrical losses depending on the rotating speed which is measured from the experiment.

• 소음진동
• /
• 제9권3호
• /
• pp.593-599
• /
• 1999

A rotordynamic analysis is performed with a motor-bull gear rotor system supported on two partial bearings, which is intended to drive a high-speed turbo-chiller compressor impeller shaft through its built-in pinion gear. The motor-bull gear rotor system has a rated speed of 3,600 rpm, and is modeled utilizing the finite element method for analysis. As loadings on the bearings due to the gear action are significant in the system considered, each resultant bearing load is calculated statically by considering the generalized forces of the gear action as well as the rotor itself. The two support partial bearings are designed to take their varying loads along with their varying load angles, and they are also analyzed to give their rotordynamic coefficients. Then, a complex rotordynamic analysis of the motor-bull gear rotor-bearing system is carried out to evaluate its whirl natural frequencies and mode shapes and unbalance responses under various loading conditions. Results show that the bearings and entire rotor system are well designed regradless of operating conditions, i.e., loads and operating speeds.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.93-102
• /
• 2014

Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 연구회 합동 학술발표회 논문집
• /
• pp.9-12
• /
• 1998

In this paper, the power factor correction circuit using a parallel drive method is proposed so that the high power inverter air-conditioner with 3[ph] compressor motor may obtain the cost down and the improved performance. The adequate design procedures are presented to reduce the material costs by eliminating the power factor improving LC filter and derating output capacitor and inverter switches. Using the determined components, the prototype circuit with 6[kW] power consumption is built and tested to verify the operation of the proposed circuit.