• Journal of Sensor Science and Technology
• /
• v.18 no.4
• /
• pp.294-300
• /
• 2009

Cardiopulmonary resuscitation(CPR) is performed by artificial ventilation and thoracic compression for the patient under emergent situation to maintain at least the minimum level of respiration and blood circulation for life survival. Quality of the pre-hospital CPR not only significantly affects the patient's survival rate but also minimizes side effects caused by CPR. Good quality CPR requires monitoring respiration, however, traditional respiratory air flow transducers cannot be used because the transducer elements are located on the flow axis. The present study developed a new technique with no physical object on the flow stream but enabling the air flow measurement and easily incorporated with the CPR devices. A turbulence chamber was formed in the middle of the respiratory tube by locally enlarging the cross-sectional area where the flow related turbulence was generated inducing energy loss which was in turn converted into pressure difference. The turbulence chamber was simply an empty enlarged air space, thus no physical object was placed on the flow stream, but still the flow rate could be evaluated. Both inspiratory and expiratory flows were obtained with symmetric measurement characteristics. Quadratic curve fitting provided excellent calibration formula with a correlation coefficient>0.999 (P<0.0001) and the mean relative error<1 %. The present results can be usefully applied to accurately monitor the air flow rate during CPR.

• Transactions of Materials Processing
• /
• v.22 no.8
• /
• pp.463-469
• /
• 2013

In the previous work, a new forging process design, which included incremental upsetting, diffusion bonding and cogging, was suggested as a method to manufacture 1.9wt%C ultrahigh carbon workrolls. The previous study showed that incremental upsetting and diffusion bonding are effective in closing voids and healing of the closed void. In addition, compression tests of the 1.9wt%C ultrahigh carbon steel revealed that new microvoids form within the blocky cementite at temperatures of less than $900^{\circ}C$ and that local melting can occur at temperatures over $1120^{\circ}C$. Thus, the forging temperature should be controlled between 900 and $1120^{\circ}C$. Based on these results, incremental upsetting and diffusion bonding were used to check whether they are effective in closing and healing voids in a 1.9wt%C ultrahigh carbon steel. The incremental upsetting and diffusion bonding were performed using sub-sized specimens of 1.9wt%C ultrahigh carbon steel. The specimen was deformed only in the radial direction during the incremental upsetting until the reduction ratio reached about 45~50%. After deformation the specimens were kept at $1100^{\circ}C$ for the 1 hour in order to obtain a high bonding strength for the closed void. Finally, microstructural observations and tensile tests were conducted to investigate void closure behavior and bonding strength.

• Journal of Biosystems Engineering
• /
• v.27 no.6
• /
• pp.565-572
• /
• 2002

In order to control the root-zone temperature of greenhouse crops in the hydroponics at hot and cold season, heat pump system for cooling and heating was built and tested in this work. The system was air-to-water type and vapour compression type. The heating and cooling mode was selected by the four way valve. Capacity of the compressor was 3.75㎾ and heat transfer area of the evaporator and the condenser were 3.05㎡ and 0.6㎡, respectively. According to the performance test, it could supply heat of 42,360 to 64,372kJ/h depending on the water circulation rate of 600 to 1,500ℓ/h, respectively, when indoor air temperature was 10∼20$\^{C}$. COP of heat pump system was 3.0 to 4.0 in the heating mode. But, COP of the cooling mode was 1.3 to 2.1 at indoor temperature of 20∼35$\^{C}$. The feasibility test in the greenhouse the developed heating and cooling system was installed, showed that the heating cost of the developed system was only about 13% of that of the conventional heating system. The heating cost of the developed system was 367won/day(electric consumption 9.7㎾h/day), while that of the conventional system was 2,803won/day(oil consumption 7.7ℓ/day) at the same heating mode.

• Journal of Biomedical Engineering Research
• /
• v.20 no.4
• /
• pp.427-433
• /
• 1999

The purpose of the study is to develop an improved pitch extraction method that can be used in a variety of speech applications such as high-puality compression and vocoding, and recognition and synthesis of speech. To do so, we develop a new electroglottograph (EGG) measurement system that is based on the four modulation-demodulation type spot electrodes for detecting the EGG signals. Then, the glottal closure instant(GCI) is determined from the EGG signals on a real-time basis. We can obtain the pitch contour using the information on the GCI. It turns out that the new pitch contour algorithm (PCA) operates more reliably as compared to the conventional speech-only-based algorithm. In addition, we study the speech source models and glottal vibratory patterns for Koreans by measuring and analyzing the diversified vibration patterns of the vocal from the EGG signals.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.808-815
• /
• 2013

In this paper, we propose a novel fast and low-complexity Motion Estimation (ME) algorithm for Ultra High Definition (UHD) High Efficiency Video Coding (HEVC). Motion estimation occupies 77~81% of the amount of computation in HEVC. After all, the main key of video codec implementation is to find a fast and low-complexity motion estimation algorithm and architecture. We analyze the previous motion estimation algorithms and propose three optimal algorithm to reduce the computation proportion for HEVC. The proposed algorithm uses only 0.36% of the amount of operations compared to full search algorithm while maintaining compression performance with slight loss of 1.1%.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.97-103
• /
• 2010

In this paper, we propose a new digital watermarking technique. The main idea of the proposed algorithm relies on the assumption that any real number can be expressed as a summation of the exponential form with base of 2 and if only consider the first few summations some numbers can be expressed in the same form. Therefore, we can be sure that some amount of changes does not affect the first few summations. The algorithm decomposes a host image in wavelet domain and intensity of the significant wavelet coefficient is expressed in exponential form with base of 2. Multiple barcode watermarks are then embedded by modifying the parity of the exponent. The proposed scheme is semi-blind and also offers either objective or subjective deteew su as well. From extracted watermarks, more accurate watermark is obtained by merging technique as a final watermark. As a simulation result, the proposed algorithm could resist most cases of salt and pepper noise, Gaussian noise and JPEG compression.

• Journal of Periodontal and Implant Science
• /
• v.28 no.1
• /
• pp.187-191
• /
• 1998

Aplastic anemia is a disease characterized by general lack of bone marrow activity; It may affect not only the red blood cells but also the white blood cells and platelets, resulting in pancytopenia. Spontaneous gingival hemorrhage is present in some cases and it is related to the blood platelet deficiency. This case report presents the periodontal treatment of a patient with aplastic anemia. A 43-year-old female was referred for continuous gingival bleeding after periodontal treatment. Periodontal findings revealed generalized gingival imflammation, oozing of blood from gingival crevice, and it was diagnosed as adult periodontitis. Root planing and extraction of the upper left third molar with poor prognosis were put into operation after elevation of the platelet count with platelet transfusion. The extraction socket was sutured with 3-0 silk. Bleeding continued even after digital compression at the upper right second premolar, second molar, and left canine areas, which presented severe inflammation. Although platelets were transfused repeatedly, platelet count did not stay elevated since survival rate of the transfused platelets were low due to alloimmunization. Thrombin gauze packing was not effective. Bleeding ceased 3 days after treatment with transfusion of donor platelets. 20 days after the treatment, the gingiva was generally healthy except upper right second premolar and lateral incisor areas. The result of periodontal treatment was good, but bleeding control after treatment was troublesome. In the periodontal treatment of patient with aplastic anemia, elevation of the platelet count with platelet transfusion seems to be the best method for hemorrhage control.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1629-1631
• /
• 1998

Crosslinked polyethylene (XLPE) insulated cables are now widely used all over the world for extra-high voltage underground transmission systems. Prefabricated type (compression type) joint has developed in order to shorten the assembly time and lower the possibility of contamination at site by many companies in the world. For outdoor termination, to control the electric field distribution as uniform as possible, especially for the use of extra-high voltage system. much of products are adopting the oil-impregnated condensor cone type instead of electric field control element which uses the permitivity of it only (not capacitance). For Gas-immersed termination, dimension of outer insulation bushing was determined by IEC Publication 859. The highest voltage of underground power cable system is 345kV now, in Korea. We have much of experiences of the development of prefabricated type accessories for CV cable systems (154kV, 161kV, 230kV level). So it was possible to inspect the proto type of accessories for 345kV CV cable system and seems that the need time for the development of products is reduced.

• Parasites, Hosts and Diseases
• /
• v.58 no.1
• /
• pp.27-35
• /
• 2020

This study aimed to investigate metacercarial infections in the wrestling halfbeak, Dermogenys pusilla, collected from Bangkok metropolitan region of Thailand. A total of 4,501 fish from 78 study sites were commonly examined with muscle compression and digestion methods (only head part of fish) during September 2017 to July 2018. The overall prevalence of metacercarial infection was 86.1% (3,876/4,501 individuals), and the mean intensity was 48.9 metacercariae per fish infected. Four species, i.e., Posthodiplostomum sp., Stellantchasmus falcatus, Cyathocotylidae fam. sp., and Centrocestus formosanus, of digenetic trematode metacercariae (DTM) were detected. The prevalences were 65.8%, 52.0%, 2.1%, and 1.2%, respectively and their mean intensities were 23.1, 51.6, 1.4, and 3.2 per fish infected, respectively. The seasonal prevalences were 81.0% in winter, 87.8% in summer and 87.4% in rainy, and the mean intensities were 38.9, 46.6, and 55.2 metacercariae per fish infected, respectively. Conclusively, it was confirmed that the wrestling halfbeak play the role of second intermediate hosts of 4 species of digenetic trematodes including S. falcatus and Posthodiplostomum sp. in Bangkok metropolitan region. And then the metacercariae of C. formosanus and Cyathocotylidae fam. sp. are to be first found in the wrestling halfbeak by this study.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.203-215
• /
• 2018

A large body of experiments have been conducted to date to evaluate the punching shear strength of flat slab-column connections, but it is noted that only a few of them have been considered for the development of the ACI Code provisions. The limited test results used for the development of the code provisions fall short of predicting accurately the punching shear strength of such connections. In an effort to address this shortfall and to gain an insight into the factors that control the punching shear strength of flat slab-column connections, we report a qualified database of 650 punching shear test results in this article. All slabs examined in this database were tested under gravity loading and do not contain shear reinforcement. In order to justify including any test result for evaluation punching shear database, we have developed an approved set of criteria. Carefully established set of criteria represent the actual characteristics of structures that include minimum compressive strength, effective depths of slab, flexural and compression reinforcement ratio and column size. The key parameters that significantly affect the punching shear strength of flat slab-column connections are then examined using ACI 318-14 expression. The results reported here have paramount significance on the range of applicability of the ACI Code provision and seem to indicate that the ACI provisions do not sufficiently capture many trends identified through regression of the principal parameters, and fall on the unsafe side for the prediction of the punching shear strength of flat slab-column connections.