• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.17-25
• /
• 2012

유한요소해석 등에 의한 수치해석에서는 정식화된 응력-변형률 관계가 필요하다. 그러나 현재까지 여러 연구자들에 의해 발표된 응력-변형률 관계의 정식화는 미소변형률 수준에서부터 피크에 이르기까지 전체를 모두 만족하지 못하게 표현하였다. Tatsuoka and Shibuya(1991)는 하나의 식으로 연약 점성토에서 연암에 이르는 광범위한 지반재료에 대해 적용 가능하며, 넓은 범위의 변형률 수준($10^{-6}{\sim}10^{-2}$)에 대해 적용할 수 있는 새로운 제안식을 발표하였다. 본 연구는 세계 각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준사 공시체 및 2종류의 유리 구슬(Glass beads) 공시체를 이용하여 평면변형률압축시험을 실시하였다. 최대주응력방향(${\sigma}_1$)의 변형률과 최소주응력방향(${\sigma}_3$)의 변형률을 각각 $10^{-6}$에서 $10^{-2}$까지 상세히 측정하였고, 얻어진 시험 결과를 새롭게 제안된 식에 적용하였다. 그 결과 미소변형률 수준에서 피크에 이르는 응력-변형률 관계의 실측된 데이터와 매우 잘 일치하는 결과를 얻었다.

• 한국통신학회논문지
• /
• 제22권8호
• /
• pp.1814-1822
• /
• 1997

본 논문에서는 디지털 영상 정보의 저작권 보호를 위한 새로운 디지털 서명 문양(Watermark) 방법을 제안한다. 특히, 제안된 디지털 서명은 기존의 서명 방법과 비교하여 압축 환경에 대한 고려와 함께 불법적인 재서명 공격에 대응할 수 있도록 하였다. 또한 서명 문양의 비화도를 증가시키기 위해서 기존의 난수 XOR의 방법을 사용하지 않고, 서명 문양을 원영상에 단순 연산하는 방법으로 원영상에 대한 서명 문양의 영향을 최대화하였다. 그리고, 문양의 검출시 발생되는 오차를 줄이기 위해 영상을 블록 단위로 특성을 분류한 후, 최소 압축 손실 블록을 선정하고, 그 블록에 대해서만 문양을 검출하므로써 압축 손실에 강한 서명 문양이 되도록 하였다. 또한, 극복할 수 없는 압축 손실은 가설검증(Hypothesis Testing)이론에 의한 확률적인 방법을 도입하였다. 이 밖에 서명 영상에 대한 제 3의 공격에 대해서도 원영상과 사용자 영상의 평균 자승 오차(MSE, Mean Square Error) 비교를 통해 확률적으로 문양을 검출하므로써 대비하였다. 제안된 서명 방법의 컴퓨터 시뮬레이션 결과 새로운 문양 방법은 양자화 에러와 제 3의 서명 공격에 더욱 강하다는 것을 확인하였다.

• Neurospine
• /
• 제15권4호
• /
• pp.348-352
• /
• 2018

Objective: Postoperative dynamic cryo-compression (DC) therapy has been proposed as a method of reducing pain and the inflammatory response in the early postoperative period after orthopedic joint reconstruction surgery. Our aim was to analyze the analgesic efficacy of DC therapy after adult lumbar spinal surgery. Methods: DC was applied for 30 minutes every 6 hours after surgery. Pain was measured by a visual analogue scale (VAS) in the preoperative period, immediately after surgery, and every 6 hours postoperatively for the first 72 hours of the hospital stay. Patients' pain medication requirements were monitored using the patient-controlled analgesia system and patient charts. Twenty patients who received DC therapy were compared to 20 historical controls who were matched for demographic and surgical variables. Results: In the postanesthesia care unit, the mean VAS back pain score was $5.87{\pm}0.9$ in the DC group and $6.95{\pm}1.0$ (p=0.001) in the control group. The corresponding mean VAS scores for the DC vs. control groups were $3.8{\pm}1.1$ vs. $5.4{\pm}0.7$ (p < 0.001) at 6 hours postoperatively, and $2.7{\pm}0.7$ vs. $6.25{\pm}0.9$ (p<0.001) at discharge, respectively. The cumulative mean analgesic consumption of paracetamol, tenoxicam, and tramadol in the DC group vs. control group was $3,733.3{\pm}562.7mg$ vs. $4,633.3{\pm}693.5mg$ (p<0.005), $53.3{\pm}19.5mg$ vs. $85.3{\pm}33.4mg$ (p<0.005), and $63.3{\pm}83.4mg$ vs. $393.3{\pm}79.9mg$ (p<0.0001), respectively. Conclusion: The results of this study demonstrated a positive association between the use of DC therapy and accelerated improvement in patients during early rehabilitation after adult spine surgery compared to patients who were treated with painkillers only.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.36-43
• /
• 2022

Generally, in construction sites, the pipe support installation workers often use support pins of 9~10 mm which are much smaller than the safety standard sizes for work convenience. Although the safety certification standard thickness of the support pins is 11 mm, and the supervisors are often indifferent to this. Hence, products with far lower performance than the pipe support safety certification value of 40,000 N, which is applied in the supporting post-structural review, are used. Accordingly, this acts as a factor causing collapse accidents in the process of pouring concrete at the construction site. Therefore, this study performed compression experiments on new and reused pipe supports to determine how the thickness of the support pins affects the structural compression performance of the pipe support by considering the thickness of the support pins as a critical variable among various factors affecting the pipe support performance. In the course of the study, the compression test of the pipe support (V2, V4) for the new products showed that only 14 (58.3%) of the total 24 samples satisfied the safety certification standard value of 40,000 N, which indicates that more thorough quality control is required in the manufacturing process. Additionally, comparing the thickness of the support pins and their fracture shape shows that the pipes with support length of 4.0 m or longer are much more affected by the buckling of the entire length than the thickness of the support pins. Of the several factors affecting the performance of reused pipe supports, it was found that, similar to the new products, the use of support pins, with thickness of 12 mm rather than 11 mm, can satisfy the safety certification value more appropriately. Therefore, regardless of the state of usage, it could be concluded that it is necessary to use 12 mm products, whose thickness is larger than that of the safety certification standard value of 11 mm, to improve the performance of the pipe supports.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.388-390
• /
• 2022

심정지(Cardiac arrest)는 원인과 관계없이 심장의 박동이 정지되어 발생하는 일련의 상태를 말한다. 심장질환에 의한 심정지는 매년 우리나라 3대 사망원인에 포함되며 예측이 불가하다. 심정지 발생시 환자의 생명을 구하기 위한 유일한방법 중 하나는 심폐소생술이며 이 술기를 통하여 순환을 유지시킬 수 있다. 이에 소아 심폐소생술 중 새로운 가슴압박법을 활용에 따른 가슴압박의 질을 비교하였다. 연구결과 가슴압박의 평균깊이가 유의한 차이가 있었고(48.93±6.76, 53.86±4.56, <0.001), 압박대 이완 비율에도 차이를 보였다(0.87±0.13, 0.96±0.10, <0.002). 또한 자세를 의식하는 정도에서도 유의한 차이를 보였다(4.93±0.85, 8.14±1.38, <0.001).

• Restorative Dentistry and Endodontics
• /
• 제46권4호
• /
• pp.59.1-59.14
• /
• 2021

Objectives: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. Materials and Methods: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. Results: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). Conclusions: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.50-60
• /
• 2023

BGA(ball grid array)는 높은 집적도와 우수한 방열 성능을 갖고 있어 널리 이용되는 방식의 패키지이다. BGA에서 솔더볼은 패키지와 PCB를 전기적으로 연결하는 중요한 역할을 하므로, 다양한 기계적 하중 하에서 솔더볼의 비탄성 변형을 이해하는 것은 반도체 패키지의 강건설계에 필수적이다. 본 연구에서는 공정 중 PCB의 휨, die와 substrate 간의 열팽창 계수 차이 등으로 인해 소성변형이 발생한 솔더볼의 초기 형상이 비탄성 변형과 파단에 미치는 영향을 유한요소 해석으로 분석하였다. 시뮬레이션 결과, shear와 bending 하중에서 tilted, hourglass 형상 모두 파단이 발생한 반면, compression 하중이 작용하는 경우는 모두 파단이 발생하지 않았다. Shear와 bending 하중에 compression이 각각 결합될 경우, 응력삼축비가 0보다 작은 값으로 유지되어 파단이 억제되었다. 또한 변형에 취약한 요소의 Lagrangian-Green 변형률 텐서를 이용해 비교한 결과, 동일한 하중 조건이라도 솔더볼의 형상에 따라 변형의 양상에 유의미한 차이가 있음을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.175-182
• /
• 2023

본 연구는 세 집단의 심폐소생술 결과와 근피로도를 비교 분석하였다. 마네킹의 가슴압박을 할 때 큰 소리를 내어서 숫자를 세는 집단(A그룹), 숫자를 세지 않으며 자율호흡을 하는 집단(B그룹), 숫자를 세지 않으며 복식호흡을 하는 집단(C그룹)이다. 각 그룹에 12명씩의 인원을 배정하였고 5분간의 가슴압박을 시행한 후 심폐소생술 결과를 마네킹과 연결된 프로그램으로 분석하고 시행자의 근피로도를 무선근전도로 분석하였다. 가장 효율적인 방법은 B그룹으로 나타났다. 정상 범위 내에서 압박의 속도와 깊이만을 본다면 C그룹이 더 효율적일 것이나 B그룹이 근피로도가 현저히 낮게 나타났으며 A그룹은 흉부압박의 깊이에서 정상범위에 미치지 못했고 근피로도는 가장 높게 나타났다. 손의 위치 정확도 또한 B그룹이 가장 정확한 것으로 나타나 흉부압박에 대한 집중력을 유지하는 것에도 가장 효율적인 것으로 나타났다.

• Journal of Korean Neurosurgical Society
• /
• 제60권6호
• /
• pp.738-748
• /
• 2017

Objective : We present our experience of microvascular decompression (MVD) for glossopharyngeal neuralgia (GPN) and evaluate the postoperative outcomes in accordance with four different operative techniques during MVD. Methods : In total, 30 patients with intractable primary typical GPN who underwent MVD without rhizotomy and were followed for more than 2 years were included in the analysis. Each MVD was performed using one of four different surgical techniques : interposition of Teflon pieces, transposition of offending vessels using Teflon pieces, transposition of offending vessels using a fibrin-glue-coated Teflon sling, and removal of offending veins. Results : The posterior inferior cerebellar artery was responsible for neurovascular compression in 27 of 30 (90%) patients, either by itself or in combination with other vessels. The location of compression on the glossopharyngeal nerve varied; the root entry zone (REZ) only (63.3%) was most common, followed by both the REZ and distal portion (26.7%) and the distal portion alone (10.0%). In terms of detailed surgical techniques during MVD, the offending vessels were transposed in 24 (80%) patients, either using additional insulation, offered by Teflon pieces (15 patients), or using a fibrin glue-coated Teflon sling (9 patients). Simple insertion of Teflon pieces and removal of a small vein were also performed in five and one patient, respectively. During the 2 years following MVD, 29 of 30 (96.7%) patients were asymptomatic or experienced only occasional pain that did not require medication. Temporary hemodynamic instability occurred in two patients during MVD, and seven patients experienced transient postoperative complications. Neither persistent morbidity nor mortality was reported. Conclusion : This study demonstrates that MVD without rhizotomy is a safe and effective treatment option for GPN.

• Advances in Computational Design
• /
• 제5권2호
• /
• pp.195-207
• /
• 2020

The present study focuses on the application of artificial neural network (ANN) and Multiple linear Regression (MLR) analysis for developing a model to predict the unconfined compressive strength (UCS) and split tensile strength (STS) of the fiber reinforced clay stabilized with grass ash, fly ash and lime. Unconfined compressive strength and Split tensile strength are the nonlinear functions and becomes difficult for developing a predicting model. Artificial neural networks are the efficient tools for predicting models possessing non linearity and are used in the present study along with regression analysis for predicting both UCS and STS. The data required for the model was obtained by systematic experiments performed on only Kaolin clay, clay mixed with varying percentages of fly ash, grass ash, polypropylene fibers and lime as between 10-20%, 1-4%, 0-1.5% and 0-8% respectively. Further, the optimum values of the various stabilizing materials were determined from the experiments. The effect of stabilization is observed by performing compaction tests, split tensile tests and unconfined compression tests. ANN models are trained using the inputs and targets obtained from the experiments. Performance of ANN and Regression analysis is checked with statistical error of correlation coefficient (R) and both the methods predict the UCS and STS values quite well; but it is observed that ANN can predict both the values of UCS as well as STS simultaneously whereas MLR predicts the values separately. It is also observed that only STS values can be predicted efficiently by MLR.